General Partitions

As a commercial restroom designer, you may find that the partitions in the bathroom you are constructing are General Partitions brand stalls. If this is the case, then we have just the products to help in repairing and maintaining your restroom overtime.

Robert Brooke Partitions and Stalls is a General toilet stall parts distributor with 35 years of involvement with the partitions industry. Throughout our years of experience, we have grown as a company and developed expertise in distributing top of the line stall parts from popular brands. 

We are a trusted and reputable partitions parts distributor, so you can count on the top name brands that we choose to work with. We choose to carry and sell General Partitions parts because they have continuously proven their durability and high privacy functions.

If you would like your General restroom stall hardware to be shipped out today, order before 2:00 p.m. Eastern Time and your product will likely ship out same day. This is dependent on the product’s lead time. If the product description reads Lead Time: In Stock, then you’re in luck; we have the product currently in our warehouse and ready to be sent to you. Lead Times that are 1-2 days are not in our current stock and will ship from the factory.

General Bathroom Stall Hardware Options

Check our our online store to see what General toilet stall hardware we have available. We have two full pages of General Partitions parts, so take a look and decide which hardware for your commercial restroom you will likely need to use.

Stall latches should always be replaced immediately because they keep the door locked for optimal privacy. We have a few General Partitions latches you could potentially use for your partitions.

Both the General Partitions turn latch knob and ADA turn latch knob are made of Zamac die cast metal, a very common material used for partition hardware. These General Partitions latches are meant to be used on metal stall doors. The General Partitions latch cover product completes both of these General Partitions latches.

You can also order the General Partitions slide bolt latch which is made from Zamac die cast metal, as well. Slide bolt latches are the typical lock you will find in many public restrooms that have a sliding bar that fits through a hole to secure the stall.

We also have other General heavy-duty latch options available such as the latch knob & cover and latch knob, cover & pin set.

Another important restroom stall door piece is the hinge. We carry a few different styles of General hinges that you can find on our General partitions hardware pages. 

Make sure you purchase the correct hinge you need as we carry both top and bottom General hinges. We have top and bottom General Partitions hinges for either round-edged pilaster posts or square-edged pilaster posts, so be sure to examine your stalls and determine which shape you have before making a purchase decision.

Of course, if you only need to replace a segment of a General Partitions hinge in your commercial restroom, we also have various General hinges parts. We have General Partitions hinge pins, hinge pintles and more products that are to be used with General hinges.

We carry General Partitions keeper inswings and outswings with rubber bumper to be used with square-edged pilaster posts. We also have a few different styles of keeper bumpers for concealed latches. Please browse our General toilet stall parts pages to get a better idea of what other General Partitions hardware products we carry.

General Partitions Manufacturing Company Details

General Partitions Manufacturing Corporation is a well-known manufacturer of top-grade toilet partitions. With 57 years of experience manufacturing toilet partitions and toilet partition parts, they have mastered the art of producing high-quality products that are aesthetically pleasing and made to last. At RB Partitions and Stalls, we appreciate being a distributor of their General bathroom stall parts because we trust in the quality of their toilet partition parts.

Most styles of General Partitions Manufacturing Corporation’s stalls have minimal gaps in them for maximum privacy. Graffiti can be easily wiped clean from their powder coated steel partitions, which can be considered an extra plus for designers and maintenance managers.

General Partitions also manufactures more types of bathroom related products for use in businesses and other buildings. The company makes lockers, urinal screens, public showers, public dressing rooms, and vanity tops for commercial restrooms. Their vanity tops come in different colors, so as an architect or designer, you can match them with the stalls in the public restroom you are designing.

The General Partitions Manufacturing Corporation’s current headquarters is in Erie, PA, but the General restroom stall parts that they manufacture can be ordered online from our website. 

Distributors of General Partitions Parts

For more information about the General bathroom stall parts we sell, please read the product descriptions and/or refer to our RBA Partitions and Parts Catalog. These should provide you with the information to get you started on replacing your General restroom stall parts in the restroom you design or maintain.

Even with these descriptions, you might still have more questions or concerns that we are happy to respond to. Email us at Sales@PartitionsAndStalls.com or give us a call. We would like to give you solid answers on General Partitions parts and present you with the details that you seek. 

Our experience in the partitions and stalls industry has guided us in the process of becoming  the top General toilet stall parts distributor we are today. Count on us to provide you with valuable assistance in your General Partitions hardware purchasing process.

View as Grid List

33 Items

per page
Set Descending Direction
  1. Knickerbocker Partition Turn Latch Knob

    The Knickerbocker Partition Turn Latch Knob is the male portion of there concealed latches.  The cover that goes with this latch is the 9K0255.  They are constructed of Zamac die cast metal that is then chrome plated and polished.   The manufacturer part number on this piece is 1410. Works with General partitions.

    9K0250
    $6.33
  2. Knickerbocker Partition Ada Latch Knob & Cover

    The Knickerbocker Partition Ada Latch Knob & Cover is constructed of Zamac die cast metal that is then chrome plated and polished.   The Cover has an outer diameter of 1-3/4" with a 1-11/32" inner ring diameter. The Knob has an outer diameter of 1-5/8" and and inner diameter of 1-11/32". ADA Lever is 3-3/4" long. Also known as a Bathroom Stall ADA Concealed Latch. Manufacturer part # 6170. Works with General partitions.

    9K0250A
    $17.27
  3. Knickerbocker Partition Latch Knob Cover

    The Knickerbocker Partition Latch Knob Cover is the female portion of there concealed latches.  The latch knob that goes with this latch is the 9K0250.  They are constructed of Zamac die cast metal that is then chrome plated and polished.   The manufacturer part number on this piece is 2620. Works with General partitions.

    9K0255
    $6.33
  4. General Toilet Partition Latch Knob & Cover

    The General Toilet Partition Latch Knob & Cover is constructed of Zamac die cast metal that is chrome plated and then polished.  Outside diameter of the knob and cover are 1-5/8" with the inner ring diameter of 1-1/4". Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 1390.

    92000C
    $8.22
  5. General Toilet Partitions Latch Knob, Cover & Pin

    Rating:
    100%

    The General Toilet Partitions Latch Knob, Cover & Pin is constructed of Zamac die cast metal that is then chrome plated and polished.  Outside diameter of the knob and cover are 1-3/4" with the inner ring diameter of 1-7/32". The pegs project out 1-7/32" on the cover. Pin has a diameter of 11/32" and comes in Straight or Offset and is 2-11/32" long. Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 5190 Offset Pin is used with powder coated steel and 5080 Straight Pin is used with plastic laminate. Only 1 pin is sent. Also used with Global and Fiat partitions.

    92500B
    $9.11
  6. General Toilet Partitions Ada Latch Knob Cover Straight Pin

    The General Toilet Partitions Ada Latch Knob Cover Straight Pin is constructed of Zamac die cast metal that is then chrome plated and polished.  Outside diameter of the knob and cover are 1-3/4" with the inner ring diameter of 1-7/32". The ADA Barrier Free Lever is 3-3/4" long. The straight pin has a diameter of 11/32" and 2-11/16". Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 8080.

    92500C
    $16.32
  7. Knickerbocker SS Partition Keeper Bumper for Laminate

    The Knickerbocker Partition Keeper Bumper for Laminate restroom stalls is for use on 1-1/4" thick square edged pilaster posts.   These are usually used on Plastic Laminate or Formica stalls with a concealed latch.  They are constructed of Cast Stainless Steel. The manufacturer's part number is 152-csm.

    9K1152SS
    $56.93
  8. General Toilet Partitions Bottom Hinge 1-1/4" Round Edge

    The General Toilet Partitions Bottom Hinge 1-1/4" Round Edge is for use on 1-1/4" thick round edged pilaster posts.   It is constructed on Zamac die cast metal that is chrome plated and polished.  Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Also known as a Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3010.  Shipped with mounting screws.  A=1-7/6".

    91000B
    $10.12
  9. General Partition Bottom Hinge For 1-1/4" Sq Edge

    The General Partition Bottom Hinge For 1-1/4" Sq Edge is for use on an 1-1/4" square edged pilaster post.   It is constructed of Zamac die cast metal that is then chrome plated and polished.  The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a Fiat Bathroom Stall Pivot Hinge Bottom 1-1/4". Also known as General, American Sanitary, Flush Metal, Fiat Tiolet Partition 9F0301, 9AM280, 9FL700.  Manufacture part # 3290.  Shipped with mounting screws.  A=1-5/8"

    91000P
    $9.61
  10. General Toilet Partition Nylon Cam For Steel

    The General Toilet Partition Nylon Cam For Steel For Steel restrooms is constructed of white nylon plastic.  Square part of nylon cam is 7/8" by 1-1/8" with a diameter of 11/16". The cam has an overall height of 1-1/4", with a cylinder diameter of 7/8". Also known as a Bathroom Stall Cam. Manufacture part # 98185.

    91002B
    $2.15
  11. General Partitions Bottom Cam Housing Unplated

    The General Partitions Bottom Cam Housing Unplated is constructed of Zamac die cast metal and is not chrome plated.  The housings outside dimensions are 3-1/8" wide by 1-5/32" deep by 1-7/16" high. The screw hole is 7/32" diameter. The square slot is 1" by 15/16". The square bulge were the screw is located is 1-1/2" by 1-5/32". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 4066.

    91005B
    $15.18
  12. Metpar Partitions Bottom Cam Housing Chrome Plated

    The Metpar Partitions Bottom Cam Housing Chrome Plated is constructed of Zamac die cast metal and then chrome plated. The housings outside dimensions are 3-1/8" wide by 1-5/32" deep by 1-7/16" high. The screw hole is 7/32" diameter. The square slot is 1" by 15/16". The square bulge were the screw is located is 1-1/2" by 1-5/32". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 4060

    91005BC
    $16.45
  13. General Toilet Partition Pintle 5/8" Dia For Steel

    The General Toilet Partition Pintle 5/8" diameter for steel  is for use on there steel doors and is constructed of steel and white nylon plastic.  The Pintle is 5/8" diameter by 2-1/4" overall length with 5/16-18 threaded end. Also known as a Bathroom Stall Bottom Pintle 5/8" Medium Lift. Manufacture part # 98175.  Shipped with nut and lock washer.

    91006B
    $4.43
  14. General Toilet Partition Top Hinge For 1-1/4" Round Edge

    The General Toilet Partition Top Hinge For 1-1/4" Round Edge is for use on 1-1/4" thick round edged pilaster posts.  It is constructed of Zamac die cast metal that is then chrome plated and then polished.  Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 3/8" diameter. Also known as a Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3510.  Shipped with mounting screws.  A=1-7/6"

    91500B
    $10.12
  15. General Top Hinge For 1-1/4" Square Edge Pilaster

    The General Top Hinge For 1-1/4" Square Edge Pilaster is for use on 1-1/4" square edged pilaster posts.  It is constructed of Zamac die cast metal that is then chrome plated and polished.  The hinge measures 2-1/4" high by 1-1/4" wide. The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 3/8" diameter bushing. Also known as a Fiat Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3790.  A=1-5/8"

    91500P
    $9.61
  16. General Top Hinge Pin 3/8" Dia 3-1/4" Long For Laminate

    The General Top Hinge Pin 3/8" Dia 3-1/4" Long For Laminate is for plastic laminate restroom stalls.  The top pin measures 3/8" diameter by 3-1/4" long with 5/16-18 threads. It has a screw driver flat slot on one end. Also known as a Bathroom Stall Door Top Hinge Pin. Manufacture part # 98584.  It is constructed of threaded steel. 

    91503B
    $3.48
  17. General Toilet Partition Top Hinge Pin

    The General Toilet Partition Top Hinge Pin is constructed of zinc plated steel.  The hinge pin is 3/8" diameter by 3-3/4" long. Also known as a Bathroom Stall Door Hinge Pin. Manufacture part # 98544.

    91504B
    $3.80
  18. General Toilet Partitions Slide Bolt Latch

    The General Toilet Partitions Slide Bolt Latch is constructed of Zamac die cast metal that is chrome plated and polished.  Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch. Manufacture part # 5020.  Shipped with mounting screws.

    92000P
    $8.60
  19. General Toilet Partition Keeper Bumper For 1-1/4" Inswing Sq Edge

    The General Toilet Partition Keeper Bumper For 1-1/4" Inswing Sq Edge is for use on 1-1/4" thick square edged pilaster posts.  It is constructed of Zamac die cast metal that is then chrome plated and polished.  The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110.  Shipped with mounting screws.

    920601
    $7.17
  20. General Keeper Bumper For Concealed 1-1/4"

    The General Keeper Bumper For Concealed 1-1/4" is for use with concealed latches that have 1-1/4" thick squared edged pilaster posts.  They are constructed of Zamac die cast metal that is chrome plated and then polished.  Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5510.  Shipped with mounting screws.

    92060B
    $7.40
  21. General Toilet Partitions Keeper Bumper Concealed

    The General Toilet Partitions Keeper Bumper Concealed is for used with concealed latches and 1-1/4" thick square edged pilaster posts.  It is constructed of Zamac die cast metal that is chrome plated and polished.  The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5230.  Shipped with mounting screws.

    92560E
    $7.84
  22. General Toilet Partitions Keeper Bumper For 1-1/4" Outswing Sq Edge

    The General Toilet Partitions Keeper Bumper For 1-1/4" Outswing Sq Edge is for use on square edged 1-1/4" thick pilaster posts.  The keeper is constructed of Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for out swinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210.  Shipped with mounting screws.

    92060E
    $6.77
  23. General Toilet Partitions Bottom Hinge

    The General Toilet Partitions Bottom Hinge is used on round edged 1-1/4" thick pilaster posts.  It features chrome plated Zamac die cast construction. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" to center hole with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3420.  A=1-11/16"

    96319A
    $17.71
  24. General Toilet Partitions Top Hinge For Steel

    The General Partitions Top Hinge is constructed of Zamac die cast metal that is chrome plated and polished.  The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" and is 1/2" thick with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 3910.  A=1-11/16".

    96320A
    $17.71
  25. General Toilet Partitions Top Hinge Pin

    The General Toilet Partitions Top Hinge Pin is constructed of zinc plated steel.  This pin measures 1/4" diameter by 2-7/8" long.   They are generally used on metal restroom stalls.  This part is sometimes called the 98614.

    96320B
    $5.22
  26. Toilet Partition Bottom Hinge for 1-1/4" Sq Edge Cast Stainless Steel

    The Toilet Partition Bottom Hinge for 1-1/4" Sq Edge Cast Stainless Steel is a replacement for the Zamac Die Cast hinges for General, American Sanitary, Flush Metal and Fiat Partitions.  It features cast stainless steel construction, which is much more durable.  The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a General Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3293.  Shipped with mounting screws.  A=1-5/8"

    9A3293
    $23.00
  27. Toilet Partition Top Hinge for 1-1/4" Sq Edge Cast Stainless Steel

    The Toilet Partition Top Hinge for 1-1/4" Square Edge Cast Stainless Steel is a replacement for the Zamac Die Cast hinges for General, American Sanitary, Flush Metal and Fiat Partitions.  It features cast stainless steel construction, which is much more durable.  The hinge measures 2-1/4" high by 1-1/4" wide. The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 3/8" diameter bushing. Also known as a Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3793.  A=1-11/16"

    9A3793
    $23.00
  28. Toilet Partition Slide Bolt Latch SS

    The Toilet Partition Slide Bolt Latch is constructed of Cast Stainless Steel.  The latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch and Toilet Partition Locks. Manufacture part # 5023.  Shipped with mounting security screws.  Also known as 9F0302SS.

    This latch is the same as our 9F0302 (5020), but is made of cast stainless steel, which is much more durable and heavy duty.

    9A5023
    $20.47
  29. General Toilet Partition Ada Latch Cover Knob w/ Offset Pin

    The General Toilet Partition Ada Latch Cover Knob w/ Offset Pin is constructed of Zamac die cast metal that is then chrome plated and polished.  Outside diameter of the knob and cover are 1-3/4" with the inner ring diameter of 1-7/32". The ADA Barrier Free Lever is 3-3/4" long. The off set pin has a diameter of 11/32" and 2-11/16". Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 8190.

    9A8190
    $15.18
  30. Knickerbocker Partition Keeper Bumper 1-1/4" Round Edge

    The Knickerbocker Partition Keeper Bumper 1-1/4" Round Edge is used on 1-1/4" thick round edged pilaster posts and doors with a concealed latch.  The keeper is constructed of Zamac die cast metal that is chrome plated and polished.  This piece is used by Knickerbocker and General Partitions on there restroom stalls.  It sometimes known as part # 152ZAP or 5470.

    9K0152
    $27.83
  31. Knickerbocker Partition Top Hinge Casting

    The Knickerbocker Partition Top Hinge Casting is constructed of Zamac die cast metal and is not plated.  This piece is used on Knickerbocker, Global and General Partitions metal doors, there maybe more, but this is all we know at this point.  The outside measurements are 2-7/31" by 2-11/16" x 2-5/8", which is the measurement, less the tabs that go into the door.  The hole throgh the center has a diameter of 1/4".  The manufactures part number is 4646.

    9K0245
    $15.18
  32. Hadrian Partition Ada Turn Latch & Cover

    Hadrian's new style 7/15/19 partition Ada latch knob with set screw included. The latch is ADA compliant and meets barrier free codes.  They are constructed of Zamac die cast metal that is then chrome plated and polished. This part is used on Hadrian and General Partitions and will replace the old style concealed turn latch. The new manufacturer's part number is 601150, but also associates with old parts and replaces 601100, 601110, 601200. This new turn latch with set screw and cover will replace all standard or old Ada latches prior to 8/1/2019.

    9A601150
    $20.24
  33. Hadrian Partition Ada Turn Latch & Cover SS

    Hadrian's new style 7/15/19 Partition Ada Latch Knob includes the turn latch wit set screw and cover. The latch is ADA compliant and meets barrier free codes.  They are constructed of die cast stainless steel that is then a brushed finish. This part is used on Hadrian and General Partitions and will replace the old style concealed turn latch.  The new manufacturer's part number is 901150, but also associates with old parts and replaces 601100-700, 601110-700, 601200-700. This new turn latch with set screw and cover will replace all standard or old Ada latches prior to 8/1/2019.

    9A901150
    $24.04
View as Grid List

33 Items

per page
Set Descending Direction