Ampco

Order your Ampco replacement parts and Ampco toilet partition hardware from our website. We have a wide selection of Ampco stall hardware that commercial restroom designers and architects alike can choose from.

If you’re a designer, architect, building owner or simply in charge of repairs for a facility’s restroom, you may have noticed the Ampco nametag on the partitions. Ampco by AJW is a well-known partitions and replacement part manufacturer. The commercial restroom you take care of could very well have Ampco partitions in place in which case you will need to know where and how to order Ampco parts for replacement purposes.

Our company, RB Partitions and Stalls, is a proud distributor of Ampco partitions hardware. Years ago, we discovered Ampco products and started selling their parts to our customers. Over the years spent with them, we have grown confident in their manufacturing talents. We fully trust in their ability to manufacture reliable Ampco partitions and Ampco bathroom partitions hardware as they have proven their skills time and time again.

Please feel free to continue to refer back to our Ampco partitions parts page when you need to order replacement parts for your Ampco stalls. You can always bookmark our Ampco stall hardware page and save your preferences for future orders. This way you can easily return to our website when your establishment’s restroom partitions require new Ampco toilet partitions hardware.

Replacement Parts for Ampco Stalls

Your Ampco bathroom stall could require a number of replacement parts, and it’s always best to know exactly which one you need. We have one page specifically for Ampco bathroom partitions hardware, so you can quickly browse and determine which part will be the best option to repair your stall.

Our more obvious products include Ampco coat hooks, Ampco hinges, Ampco door stops and Ampco latches. Latches are imperative to receiving full privacy in public restrooms. If your Ampco latch breaks, you will want to replace it sooner than later to keep the visitors of your building satisfied.

We sell Ampco’s slide bolt latch which is made of chrome-plated Zamac die cast material. The Ampco latch is your typical sliding latch that you will often see in public restrooms. This product is shipped with screws for mounting purposes.

We have two kinds of Ampco coat hooks that our customers can decide between for your Ampco partitions. Ampco’s standard coat hook is made of Zamac die cast metal and has two hooks, the top one measuring 3 inches and the bottom one measuring one 1.5 inches. The Ampco coat hook with bumper is similarly made of Zamac die cast material, but it also comes with a rubber bumper.

Some of the other products we sell with less obvious uses include Ampco cams, Ampco pins and Ampco pintles. You can always read the product description to determine whether it’s the part that your partitions call for.

Like a lot of stall hardware, Ampco partitions parts for commercial business restroom stalls can become worn, rusted or simply break off. Get the jump on your repairs when your partitions start showing signs of wear or begin to rust. Order your Ampco hardware and replacement parts today.

Ordering Ampco Partitions Parts

If you order your Ampco partition hardware before 2:00 p.m. EST, your order will be shipped the same day. This only applies to certain products, so be sure contact us and let us know if you are uncertain about the shipping details. 

If the Ampco partitions parts product description on our website says Lead Time: In Stock, then your desired item is currently in our warehouse ready to be shipped. The Lead Time might also say 1-2 days in which case your Ampco partition hardware will ship from the factory because we don’t have it in stock currently.

Either way, it’s important to place your order as soon as possible so you are able to make repairs to your restroom quickly and efficiently. We can help you decide which Ampco toilet partitions hardware is the right fit for your stalls so you can have a speedy purchase process and be confident in the Ampco partition parts you ordered from us.

Ampco Stall Parts Company

Ampco was founded back in 1961 in Miami, Florida. Now called Ampco by AJW, the company joined AJW’s parent company, Fifty Door Partners, LLC in 2016. As a Fifty Door Partner company, Ampco by AJW now has the combined experience and know-how of the two manufacturers.

Ampco’s partitions can be found in public restrooms across the U.S. Several years ago, The Field Museum in Chicago won the 10th annual America’s Best Restroom Award in a contest hosted by Cintas Corporation. AMPCO by AJW manufactured the Euroline Solid Surface Veneer toilet partitions in The Field Museum restrooms.

Ampco Hardware Inquiries

We have it broken down into specific sections of the website for you so that your required Ampco toilet partition hardware is easy to locate. If you have any further questions regarding your Ampco stall parts order, please do not hesitate to contact us. We want you to receive the right Ampco partitions hardware for your commercial restroom so you can restore your partitions and make sure they are in solid condition as soon as possible.

Send your inquiries to Sales@PartitionsAndStalls.com or call us to receive more information about Ampco toilet partitions hardware. Our experienced team members will help you to identify the best suited Ampco partitions hardware to mend your stalls.

Please see our RBA Partitions and Parts Catalog for more details.

View as Grid List

22 Items

per page
Set Descending Direction
  1. Ampco Partitions Bottom Cam Housing Chrome Plated

    The Ampco Partitions Bottom Cam Housing Chrome Plated is constructed of Zamac die cast metal and then chrome plated. The housings outside dimensions are 3-1/8" wide by 1-5/32" deep by 1-7/16" high. The screw hole is 7/32" diameter. The square slot is 1" by 15/16". The square bulge were the screw is located is 1-1/2" by 1-5/32". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 4060

    91005BC.
    $16.45
  2. Ampco Toilet Partition Coat Hook Bumper

    The Ampco Toilet Partition Coat Hook Bumper is constructed of Zamac die cast metal and then chrome plated.  Coat hook bumper projects out 3" and has a rubber insert. The hook projects out 1-7/32". The coat hook bumper base is 1-7/16" wide by 2-1/4" high with a hole spacing of 7/8". Also known as a Bathroom Stall Hook. Manufacture part # 4000.

    96200B
    $3.07
  3. Toilet Partition Door Stop 2" High

    The Toilet Partition Door Stop 2" High is constructed of chrome plated Zamac die cast. The door stop base is 2-1/8" diameter with a 1-19/32" hole spacing. The stop projects out 2" with a rubber insert on the end of the stop. Also known as Bathroom Stall Door Stop. Manufacture part # 4120.

    9A0412
    $2.47
  4. Partition Keeper Bumper, 1-1/4" Round Edge Outswing

    The Partition Keeper Bumper, 1-1/4" Round Edge Outswing is constructed of Zamac die cast metal that is then chrome plated and polished.  Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5570.  Shipped with mounting screws.

    9A5570
    $7.59
  5. Partition Keeper Bumper 1-1/4" Round Edge

    The Partition Keeper Bumper 1-1/4" Round Edge is constructed of Zamac die cast metal that is then chrome plated and polished.  Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 1/4" deep. The opening to mount it on the round edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5580.  Shipped with screws for mounting.

    9A5580
    $7.91
  6. Partition Outswing Keeper Bumper 1-1/4" Post Sq Edge

    The Partition Outswing Keeper Bumper 1-1/4" Post Sq Edge is constructed of Zamac die cast metal that is then chrome plated and polished.  Keeper is 1-1/4" tall by 2-3/8" wide by 1-13/16" deep. The strike is 1/2" thick with rubber insert. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5970.  Shipped with screws for mounting.

    9A5970
    $7.59
  7. Partition Keeper Bumper Inswing 1-1/4"

    The Partition Keeper Bumper Inswing 1-1/4" is constructed of Zamac die cast metal that is then chrome plated and polished.  Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5980.  Shipped with screws for mounting.

    9A5980
    $7.59
  8. Ampco Toilet Partitions Bottom Cam Housing Unplated

    The Ampco Toilet Partitions Bottom Cam Housing Unplated is constructed of Zamac die cast metal.  The housings outside dimensions are 3-1/8" wide by 1-5/32" deep by 1-7/16" high. The screw hole is 7/32" diameter. The square slot is 1" by 15/16". The square bulge were the screw is located is 1-1/2" by 1-5/32". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 4066.

    9C0140.
    $15.18
  9. Ampco Toilet Partition Nylon Cam

    The Ampco Toilet Partition Nylon Cam is constructed of white nylon plastic.  Square part of nylon cam is 7/8" by 1-1/8" with a diameter of 11/16". The cam has an overall height of 1-1/4", with a cylinder diameter of 7/8". Also known as a Bathroom Stall Cam. Manufacture part # 98185.

    9C3002.
    $2.15
  10. Toilet Partition Bottom Hinge For 1-1/4" Round Edge

    The Toilet Partition Bottom Hinge For 1-1/4" Round Edge  is constructed of chrome plated Zamac die cast metal.  This hinge is used on round edged pilaster posts of 1-1/4" thickness.  The hinge measures 1-1/4" deep by 2-1/8" high by 1-7/16" wide. The U part of the hinge measures 2-1/8" high by 1-1/4" deep with a slot depth of 11/16". The hole spacing is 1-1/2". The lug projects out 1-3/32" and is 1/2" thick with a 5/16" diameter hole. Also known as a Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 4040. Used on Ampco and Metpar Metal Partitions.  Shipped with mounting screws.  A=1-7/16"

    9C3004
    $16.45
  11. Ampco Toilet Partition Pintle

    The Ampco Toilet Partition Pintle is constructed of steel and white nylon plastic.  The Pintle is 5/8" diameter by 2-1/4" overall length with 5/16-18 threaded end. Also known as a Bathroom Stall Bottom Pintle 5/8" Medium Lift. Manufacture part # 98175. Shipped with nut and lock washer.

    9C3006.
    $4.43
  12. Toilet Partition Top Hinge 1-1/4" Round Edge

    The Toilet Partition Top Hinge 1-1/4" Round Edge is constructed of Zamac die cast metal that is then chrome plated and polished.   This hinge is used on 1-1/4" thick round edged pilaster posts.  The outside dimensions of the hinge are 1-1/4" deep by 2-1/2" high by 1-7/16" wide. The U mounting channel is 2-1/8" high by 1-1/4" deep with a slot depth of 11/16". The mounting holes are 1-1/2" apart on center. The lug projects out 1-3/32" by 13/32" thick with a 3/8" diameter bushing. Also know as a Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 4530. Used on Ampco and Metpar Metal Partitions.  Shipped with mounting screws.  A=1-7/16"

    9C3503
    $16.13
  13. Partition Top Hinge Casting Unplated

    The Toilet Partition Top Hinge Casting Unplated is constructed of Zamac die cast metal.  The outside dimensions of the top hinge casting are 3-7/16" high by 2-3/8" wide by 1-5/32" deep. The casting features four holes, two of them are 3/8" diameter, one is 7/32" diameter and the fourth is a threaded hole for a 5/16-18 screw. The two U channels have spacings of 13/16" and 1" on the other. Also known as a Bathroom Stall Door Insert - Top 1". Manufacture part # 4546. Used with AMPCO and Metpar Toilet Partitions.

    9C3513
    $11.39
  14. Ampco Toilet Partition Top Hinge 1-1/4" Sq Edge, Uses 1/4" Pin

    The Ampco Toilet Partition Top Hinge 1-1/4" Sq Edge, Uses 1/4" Pin is for use on square edged pilaster posts that are 1-1/4" thick.  It is constructed of Zamac die cast metal and then chrome plated and polished.  The hinge mounting U channel measures 2-1/4" high by 1-1/4" deep with an insert depth of 1-5/16". The hole spacing is 1-1/2" on centers. The hinge lug projects out 1-11/16" by 1/2" thick with a 1/4" bushing diameter. Also known as a AMPCO Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 3610.  Ships with mounting screws.

    9C3610
    $17.71
  15. Ampco Toilet Partition Top Hinge Pin For Laminate

    The Ampco Toilet Partition Top Hinge Pin For Laminate is constructed fo knurled steel.  This pin is used on there plastic laminate restroom stalls.   Hinge pin is 3-1/4" long by 1/4" diameter. Also known as a Bathroom Stall Hinge Pin. Manufacture part # 99585.

    9c4000
    $3.80
  16. Ampco Toilet Partition Slide Bolt Latch

    The Ampco Toilet Partition Slide Bolt Latch is constructed of Zamac die cast metal and then chrome plated.  Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch.  Manufacture part # 5020.  Shipped with mounting screws.

    9CP100.
    $8.60
  17. Ampco Toilet Partition Bottom Door Insert For 7/8" Door

    The Ampco Toilet Partition Bottom Door Insert For 7/8" Door is constructed of Zamac die cast metal and then chrome plated.  The door insert measures 2-5/16" wide by 1" wide by 1-3/16" high. The hex shaped hole is 5/8" and the round hole is 7/32" diameter. The material or rim is 5/16" high. Also known as a Bathroom Stall Door Insert Bottom 7/8". Manufacture part # 1530.

    9CP325
    $5.06
  18. Ampco Toilet Partition Pintle Laminate

    The Ampco Toilet Partition Pintle Laminate is for laminate restroom stalls.  It is constructed of steel and white nylon plastic.  The pintle is 1/2" diameter by 2-5/16" high. The threads are 5/16-18. Also known as a Bathroom Stall Pintle. Manufacture part # 98265.  Shipped with lock washers and nut.

    9CP350.
    $3.80
  19. Ampco Toilet Partition Nylon Cam

    The Ampco Toilet Partition Nylon Cam is constructed of white nylon.  The partition cam head outside diameter is 23/32" and the inside diameter is 1/2". The cams cylinder is 1-13/32" long with a diameter of 5/8". For use with a 1/2" pintle. Also known as a Bathroom Stall Cam. Manufacture part # 98275.

    9CP375.
    $3.80
  20. Toilet Partition Top Hinge Door Escutcheon For 7/8" Thick Door

    The Toilet Partition Top Hinge Door Escutcheon For 7/8" Thick Doors has chrome plated Zamac die cast construction. The outside dimensions of the escutcheon are 1" deep by 1-5/8" high by 2-3/8" wide with two of the three holes with a diameter of 5/16" and one at 7/32". The inside dimensions of the U are 1" high by 2-1/16" wide. Also known as a Bathroom Stall Door Insert - Top 7/8". Manufacture part # 2740. Used on Metpar and AMPCO Toilet Partitions.

    9CP425
    $6.33
  21. Ampco Toilet Partition Bottom Hinge

    The Ampco Toilet Partition Bottom Hinge is constructed of Zamac die cast metal, then chrome plated.  The hinge U channel measures 2-1/4" high by 1-1/4" deep with an insert depth of 1-5/16". The hole spacing is 1-1/2" on center. The hinge lug projects out 1-11/16" by 1/2" thick with a hole diameter of 5/16". Also known as a AMPCO Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3130.  Shipped with mounting screws.  A=1-11/16"

    9F0214N
    $17.71
  22. Toilet Partition Coat Hook 3" Projection X 1-3/4" High

    The Toilet Partition Coat Hook 3" Projection X 1-3/4" High is constructed of chrome plated Zamac die cast metal.  The hook base measures 1-3/16" wide by 1-9/16" high. The long hook projects out 3" and the short hook projects out 1-1/2". Also known as Bathroom Stall Hook. Manufacture part # 4020.  Same as our part # 9AM350.

    9G0161
    $2.02
View as Grid List

22 Items

per page
Set Descending Direction