Mills

Check out our online store and browse the Mills bathroom stall hardware that we have in stock. Our company, Robert Brooke Partitions and Stalls, carries restroom stalls and toilet stall hardware manufactured by top name brands on our partitions web store. One of the top-rated partitions manufacturers whose parts we sell parts is Mills Corporation.

Our extensive selection of Mills partition hardware ranges from items like the Mills slide bolt latch concealed to the Mills coat hook with bumper. We also carry Mills hinge sets, keeper bumpers, door cams, and more.

The Mills partition hardware section of our website is the perfect page to return to when the restroom you are constructing or repairing needs replacement parts. With all the individuals constantly going in and out of public restrooms, restroom stall parts can quickly become damaged and worn. Sooner or later, the Mills partitions in your commercial restroom will require new Mills toilet partition hardware.

About Mills Partitions

Mills Partitions is part of Bradley Corporation. Bradley Corporation is recognized for manufacturing toilet stalls and toilet stall hardware. The company also manufactures washroom accessories, faucets, showers, lockers, tankless water heaters, safety and emergency fixtures, and more.  

The Bradley Corporation manufacturing plant is located in Menomonee Falls, WI which is very close to Milwaukee, WI. Bradley manufactures their Mills partitions and Mills bathroom partition hardware at their manufacturing plant in Marion, OH. 

The Bradley partitions company has been in business for almost 100 years. Harry Bradley founded Bradley Corporation, which was then called The Bradley Washfountain Company, in 1921. Since then the company has grown tremendously and has experienced decades of success. 

Because their products are so successful, we sell Bradley Mills bathroom partition parts on our RB Partitions and Stalls web store. Here at RB Partitions and Stalls, we have had the pleasure of witnessing Mills stalls and Mills bathroom stall parts continuously deliver customer delight.

We Carry Mills Toilet Partition Hardware

It will be useful to keep in mind that restroom visitors prefer a clean, undamaged, fully functioning public restroom. Ordering the correct replacement Mills toilet partition hardware soon will be critical to your restroom users’ comfort. Our handy product descriptions can help you to determine which Mills stall parts will best fit your specific toilet stall criteria.

Mills Slide Bolt Latch

We carry Mills slide bolt latches in several different styles. We have the one-of-a-kind Mills slide bolt concealed latch which is a very popular slide latch. Its unique shape and body make it a distinctive part that’s in a class of its own.

We also sell the Mills surface-mounted slide bolt latch and toilet partition locks. This particular slide latch has an offset bolt, which makes it different from the typical slide bolt latch.

The Mills cast stainless steel slide latch we have can also be used with Accurate brand stalls. Like the Mills surface-mounted slide bolt latch, this product will ship to you with a set of screws for mounting the Mills partition hardware.

Mills Hinge Sets and Hinge Parts

The Mills top bottom hinge set that we carry is quite useful because it includes several Mills partition parts for hinges. This hinge set contains not only the top and bottom hinges, but also security screws and hinge pins for product installation. The hinge set is meant to be used on 1-1/4" thick round-edged pilaster posts on Mills toilet partitions.

While creating your restroom or making renovations, you might notice that restroom hinges involve numerous parts. One hinge part that we carry is the Mills door cam. The Mills door cam should be used with Mills metal stall doors.

You can continue your search for other Mills partition hardware on our Mills stall hardware page. We have many more Mills stall parts in our current inventory. Make note of our Mills toilet partition hardware page so that you can quickly go back to it for future use.

Ask Us About Mills Partition Parts

Let us know if you have any questions about shipping or payment method when ordering Mills partition hardware from our website. We accept various forms of payment, so let us know if you have any trouble when ordering Mills toilet partition hardware using your selected payment method.

Depending on the item, your order of Mills bathroom partition hardware can be shipped out the same day if purchased before 2:00 p.m. EST. Look at the Lead Time in the Mills partition hardware product description in order to figure out whether the item will ship out soon. If the Lead Time says that the item is “In Stock,” then we currently have that Mills partition part in our warehouse inventory. Order soon so that you can receive your Mills toilet partition hardware just in time to make any necessary repairs to your Mills restroom stalls.

Please ask us any questions you have about Mills partition hardware before you place your order. We want to be 100% sure that the Mills bathroom stall parts you receive are exactly what you need to replace on your toilet stalls. Our mission is to keep our customers happy with each order of Mills partition hardware which, in turn, will keep their public restroom visitors happy.


Please contact us by phone or email with your Mills bathroom partition hardware inquiries. Call our phone at 800 642-2403 or email us at Sales@PartitionsAndStalls.com so that we can provide you with the best answers regarding the Mills partition hardware that you wish to order.

View as Grid List

10 Items

per page
Set Descending Direction
  1. Mills Toilet Partitions Top Bottom Hinge Set

    The Mills Toilet Partitions Top Bottom Hinge Set is for use on there 1-1/4" thick round edged pilaster posts.  The kit includes the top and bottom hinges along with the hinge pins and the security screws.  They are constructed of Zamac die cast metal that is then chrome plated and polished.  The manufacture part number is HDWT-Z01.

    90T100-90T110
    $92.00
  2. Partition Slide Bolt Latch Cast ss, Hole Spacing 1-3/4" X 1-1/2"

    The Partition Slide Bolt Latch is constructed of Cast Stainless Steel and has a Hole Spacing 1-3/4" X 1-1/2" center to center.  The latch base is 2-31/32" wide by 1-15/16" high and projects 1-1/8" high. The hole spacing is 1-3/4" wide by 1-1/2" high. The four mounting holes have a diameter of 1/4". The Slide Latch base is 1/4" thick. The latch bolt is 7/8" wide by 3-7/16" long. This toilet stall latch is used on Accurate Partition Corp and Mills Partitions. Also known as a Bathroom Stall Slide Latch. Manufacture part # 6983.  This product is shipped with mounting screws.

    9A6983
    $24.04
  3. Mills Partition Door Cam

    The Mills Partition Door Cam is used on there metal restroom stall doors.  Also known as HDWT-P117.

    90T117
    $3.16
  4. Mills Toilet Partition Slide Bolt Latch Concealed

    The Mills Toilet Partition Slide Bolt Latch Concealed is a popular latch used by them.  Latch cover plates are 1-3/4" wide by 1-3/8" high. The latch switch is 1-15/32" wide. The latch bolt is 3/8" diameter. The spacing between the cover and the latch 1-1-32". They are constructed of Zamac die cast metal that is then chrome plated and polished.  This is a one of a kind latch. Also known as a Bathroom Stall Concealed Latch. Manufacture part # 4230, HDWT T290.

    90T290
    $18.98
  5. Partition Keeper Bumper Inswing Flat Stop Chrome Plated

    The Partition Keeper Bumper Inswing Flat Stop Chrome Plated is a strike and keeper that measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick.  The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-19/32" on center. They are constructed of Zamac die cast metal that is then chrome plated and polished.   Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5140.  Shipped with mounting screws.

    90T116
    $7.00
  6. Mills Toilet Partition Keeper Bumper

    The Mills Toilet Partition Keeper Bumper is for use on 1-1/4" thick square edged pilaster posts.  It is constructed of Zamac die cast metal that is then chrome plated and polished.  The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110.  Shipped with mounting screws.

    90T120
    $8.50
  7. Partition Slide Bolt Latch 3/8" Bar To Door Clearance

    The Toilet Partition Slide Bolt Latch 3/8" Bar To Door Clearance is just like every other slide bolt, except it has an offset bolt.  Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/4" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 3/8" from the back of the base to the underside of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed.  They are constructed of Zamac die cast metal that is then chrome plated and polished.   Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch and Toilet Partition Locks. Manufacturer part # 5030.  Shipped with mounting screws.

    90T160
    $8.60
  8. Mills Toilet Partitions Keeper Bumper Surface Mount

    The Mills Toilet Partitions Keeper Bumper is for use on round edged pilaster posts.  The strike and keeper measure 2-1/4" high by 29/32" wide and 15/16" deep. The hole spacing is 1-5/8" on center. They are constructed of Zamac die cast metal that is then chrome plated and polished.   Also known on Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5550.  Shipped with mounting screws.

    90T316
    $13.56
  9. Mills Toilet Partitions Keeper Bumper Concealed

    The Mills Toilet Partitions Keeper Bumper Concealed is for use on 1-1/4" thick round edged pilaster posts.  Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. They are constructed of Zamac die cast metal that is then chrome plated and polished.  Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5590.  Shipped with mounting screws.

    90T317
    $6.33
  10. Toilet Partition Coat Hook & Bumper 3-1/2" Projection x 2-3/4" High

    The Toilet Partition Coat Hook & Bumper 3-1/2" Projection x 2-3/4" High is constructed of Zamac die cast metal and then chrome plated and polished.  Coat hook base is 1-1/2" wide by 2-3/4" high, with screw spacing of 7/8" at the top. Hook projects out 1". Bumper projects out 3-1/2" with a rubber insert. Also known as a Bathroom Stall Coat Hook and Bumper. Manufacture part # 4260.  This product is the same as our 9OT285 and 9HA426.   We find this hooks used on Global Partition Corp and Accurate Partition Corp restroom stalls.

    9G0160
    $4.62
View as Grid List

10 Items

per page
Set Descending Direction