Search results for: 'number draw locker'
-
Hadrian Aluminum Headrail 1"X74" Type A
Hadrian Aluminum Headrails for 1"X74" Type A used on overhead braced floor mounted partitions. For Hadrian Powder Coated Steel and Stainless Steel Partitions. The headrail goes between a U shape which is 1" for the headrail to fit into at the top of the pilaster, the headrail bolts to the pilaster for stability at the top. Also known as part number 580074.
9HR74A -
Hadrian Partition Aluminum Headrail 1"X96" Type A
Hadrian Aluminum Headrails for 1"X96" Type A used on overhead braced floor mounted partitions. For Hadrian Powder Coated Steel and Stainless Steel Partitions. The headrail goes between a U shape which is 1" for the headrail to fit into at the top of the pilaster, the headrail bolts to the pilaster for stability at the top. Also known as part number 580096.
9HR96A -
Toilet Partition Alcove Clip For 1" Panel To 1-1/4" Pilaster
Chrome Plated Alcove Clip
Chrome plated zamac die casting, for use on 1" doors and 1-1/4" posts. Horizontal leg in picture is 1-1/4" wide and 1-1/2" tall. The vertical leg is 1-5/32" wide. The holes are 1/4" diameter. Also known as Bathroom Stall Alcove Clip, Toilet Partition Alcove Clip, and Toilet Stall Alcove Clip. The manufacturers part number is 1550 Alcove Clip and 650-6650 Alcove Clip.
9A0155 -
Partition Double Door Pull 5-1/2" Chrome Plated
The Partition Double Door Pull 5-1/2" Chrome Plated come as two handles for mounting back to back handles on an one inch thick door. The handles have 5-7/8" center to center hole spacing, and the screws included are for a 1" thick door. They are constructed of Zamac die cast metal that is then chrome plated and polished. The manufacturer part number on this part is 610112. Overall width is 6-3/4".
9HH001 -
Top Hinge Assembly Chrome Plated For 7/8" Door, 1-1/4" Post
Toilet Partition Top Hinge Assembly For 7/8" Thick Door, 1-1/4" Pilaster Square Edge Chrome Plated Polished chrome plated zamac die cast construction. Kit includes Top Hinge, Pintle, Nylon Cam, and Top Hinge Door Insert. Bottom hinge measures 2-1/4" high by 1-1/4" wide with screw spacing of 1-1/2". Mounting lug projects out 1-1/4". Also known as a Bathroom Stall Bottom Hinge Kit. Manufacture part number 63020. Screws are also included.9A3020 -
ADA Partition Slide Latch with Occupied Symbol
ADA Partition Slide Latch with Occupied Symbol. Stainless steel door lock surface mounted for 1" doors, this can be used for doors less than 1" if the rod is cut down between the two pieces. All hardware included for installation. This manufactures part number is 50553. Hole spacing is 3-1/2".
9A50553 -
Partition Continuous "H" Bracket For 1" X 1" X 54",1" Panel To 1"
Toilet Partition Continuous "H" (Alcove) Bracket For 1" Thick Panels Aluminum
Constructed of extruded anodized aluminum. Channel is 2-1/2" high by 1+" wide by 54" long, for use with 1" panels. Thru holes are 1-1/2" on center. Holes are 1/4" diameter. Thru holes are every 13" or so. Sometimes known as Bathroom Stall Continuous Alcove Bracket or Toilet Partiton Alcove Bracket. The manufacturers part numbers are 2858, and 650-1862-54. These brackets are shipped with all the needed fasteners.
9A2858 -
Matte Black Hadrian Double Door Pull
The Matte Black Hadrian double door pull is designed to mount through a 3/4" thickness partition door. Constructed of stainless steel to have a matte black finish. Measures 6-3/4" in length with center to center holes spacings of 6-1/8". Designed for outswing and ADA doors. Will require a 7/32" hole to be drilled into door and should be istalled 7" from door edge. Comes with fasteners to mount double pulls through door. Known as manufacturers part number 670112-BLK.
9H670112B -
Matte Black Hadrian Alcove Channel
The Matte Black Hadrian Alcove Channel is constructed of anodized aluminum. One side of the channel is for 1/2" thickness and the other is 3/4" thickness. This alcove channel is used to connect a panel and pilaster in-line with different thicknesses. The alcove channel is 57-1/2" in length and comes with fasteners to install. Known as manufacturers part number H60158-BLK.
9H60158B -
Partition Slide Bolt Latch 1-1/2"W x 3-1/4 L
The Partition Slide Bolt Latch 1-1/2" wide x 3-1/4 Long is constructed of cast stainless steel, and then brushed to the desired finish. The hole spacing is 2-3/4" center to center. This latch is used on Global Partition Corp and Accurate Partition Corp products. The manufacture part numbers are 40-256300, 40-8562899, and 8698. This latch is Ada approved.
9HAP68 -
Surface Mount Door Hinge Set LH In/ RH Out
The Surface Mount Door Hinge Set LH In/ RH Out is for use on Right Hand Out Swing and Left Hand In Swinging doors. They are self closing. The hinges are constructed on stamped stainless steel that is then polished. The package includes the top and bottom hinges and the mounting screws. Hole spacing right to left 2-1/4", up and down 1-1/2", overall 3" width by 2-1/2" height. Also known as a toilet partition or bathroom stall gravity surface hinge set. Manufacture part number is 7083.
9A7083 -
Partition Cast SS Angle Bracket 1-3/4" x 1-3/4"
Toilet Partition Stainless Steel Angle Bracket 1 3/4" X 1 3/4". Constructed of cast stainless steel die casting. Base is 1-3/4" x 1-3/8", projects out 1-3/4". Two screw holes are 1/4" diameter and are located 1-1/4" from opposing face. Sometimes called Bathroom Stall Angle Bracket. Sold individually, and shipped with required screws. Manufacture part number 2013.
9A2013 -
Global Partitions Plastic Laminate Door Kit For 1"
Global partitions door kit for plastic laminate material. The hinges and door stop are for 1" thick material only. We offer in a chrome finish or a stainless steel version. You will need to choose in or out swing and which finish you would like. These manufacturers numbers below. Used with Global and Accurate partitions.
See link for Instructions ***Plastic laminate hinge instructionsChrome inswing 8512013
Chrome outswing 8512014Stainless Steel Inswing 8262013
Stainless Steel outswing 82620149G -
Global Ada Latch Cover & Knob Stainless Steel
The Global Partitions stainless steel Ada latch knob & cover, with Screw, are a concealed latch that is held together by a screw. They are constructed of cast stainless steel metal that is then brushed and polished. The 9G3370 meets ADA compliance codes. The manufacturer part number is 40-8263370. This was used up until October 2021.
9G3370 -
Knickerbocker Partition Top Hinge Casting
The Knickerbocker Partition Top Hinge Casting is constructed of Zamac die cast metal and is not plated. This piece is used on Knickerbocker, Global and General Partitions metal doors, there maybe more, but this is all we know at this point. The outside measurements are 2-7/31" by 2-11/16" x 2-5/8", which is the measurement, less the tabs that go into the door. The hole throgh the center has a diameter of 1/4". The manufactures part number is 4646.
9K0245 -
Accurate Partition Door Kit Chrome Plated
The Accurate Partition Door Kit Old Style has been used from January 2013 to September 2021. The door kit is replacement hardware for an Accurate Partitions Corp. metal door. The kit includes the top and bottom hinges, nylon inserts, coat hook, keeper bumper, concealed latch and security screws. They are constructed of die cast metal that is then chrome plated and polished. The manufactures part number is 50-8511505.
These hinges will not replace previous version of Accurates old style hinges that are no longer available.
9HACL505 -
Baby Changing Table SS Surface Mount Horizontal
The baby changing tables are a horizontal station, has a door facing and collar made from 18 gauge 304 stainless steel. Fabricated of FDA approved fungus and bacteria-resistant plastic. Unit complies with 2010 ADA Accessibility Standards and supports a static load of 300 lbs. This unit is used for recess mounting , also know as part number 9018-9 with American Specialties.
Dimensions
Closed:
39-5⁄32" x 28-1/4" x 3-5/16"
Open:
39-5/32" x 28-1/4" x 18-1/8"
9A90189 -
World Dryer White Wall Guard
Wall Guard’s white acrylic units measure 31.5”x15.5”x.06” and are designed to be installed under hand dryers. Provides protection for wall and makes clean up simple. Wall Guard can be used many different applications other than just under a hand dryer. Can be mounted around sinks, on restroom stalls or anywhere where to help prevent water damage. Known as World Dryers part number 37-10455K.
- Unit Size: 31.5”x15.5”x.06”
- White(Antimicrobial Acrylic-PVC Composite)
- Mounted using Heavy Duty Double-Sided Adhesive Strips(Included)
- Easy Cleaning
- Modern Design
WD-3710455K -
Matte Black Hadrian 1/2" Pedestal Support Brace
The Matte Black Hadrian 1/2" Pedestal Support Brace is constructed of stainless steel. Pedestal support brace is used in place of a traditional pilaster where the pilaster anchors to the ground. This pedestal support brace allows pilasters to be off the ground but still provide structure to partitions. Designed to be used under a pilaster or panel that is 1/2" thickness. Available in 12", 9" and 4" heights and comes with fasteners for installing. Known as manufacturers part number 673441-12AF-BLK, 673441-9AF-BLK and 673441-4AF-BLK.
9H673441B -
Toilet Partition Bracket Two Ear Aluminum 1" Panel 1-1/2" x 2-3/4"
Toilet Partition Bracket Two Ear For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 1-1/2" high by 3-3/4" wide, with mounting screws at 2-3/4" on center. Legs project out at 2-3/4" with the thru hole at 2-1/2" for the back of the base. The legs are 1" apart. Also known as a Bathroom Stall Two Ear Wall Bracket and Toilet Partition Two Wing Wall Bracket. The manufacturers part numbers are 1754, 650-1839, and 40-8445210. Bracket is shipped with all the fasteners.
9A1754 -
Continuous One Ear Bracket Aluminum 1" Panel, 2-3/4" X 54"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 54" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 2878, and 650-9750-54. These brackets are shipped with all the needed fasteners.
9A2878 -
Aluminum Continuous One Ear Bracket 3/4" Panel, 2-1/2" X 57-1/2"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 3/4" for 3/4" thick panels. Sometimes known as Bathroom Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 650-4031. These brackets are shipped with all the needed fasteners.
9A4364 -
Surface Mount Door Hinge Set RH In/ LH Out
The Surface Mount Door Hinge Set RH In/ LH Out is for use on Right Hand In Swing and Left Hand Out Swinging doors. They are self closing. The hinges are constructed on stamped stainless steel that is then polished. The package includes the top and bottom hinges and the mounting screws. Hole spacing right to left 2-1/4", up and down 1-1/2", overall 3" width by 2-1/2"height. Also known as a toilet partition or bathroom stall gravity surface hinge set. Manufacture part number is 7073.
9A7070 -
Toilet Partition U Bracket Cast SS 1" Panel, 1-1/2" X 1-3/8" L
Toilet Partition U Bracket For 1" Thick Panel Cast Stainless Steel
Cast stainless steel construction. Bracket base is 1-3/8" x 1-1/4" with two mounting screw holes. Bracket legs project out 1-3/8" with the thru hole at 1" on center from the bottom of the base. Also known as a Bathroom Partition Stall U-Bracket or Wall Bracket 1". Manufacture part number 1913
Shipped with mounting screws
/p>9A1913 -
Stainless Steel Double Door Pull for 3/4” and 1”
Stainless Steel Double Door Pull made for 3/4” and 1” thick doors. Measurements for the handle 6-5/8" width, 5-1/2" hole to hole spacing, 5" interior opening and 2" height. Constructed of stainless steel with though bolts for mounting back to back on partition doors.Commonly known as part number 189373. This double door pull kit comes with fasteners and Torx Bit(T-20) for 3/4" and 1" thck doors.
9A189373 -
Toilet Partition Coat Hook & Bumper 2-3/4" Projection x 2-1/4" High
The Toilet Partition Coat Hook & Bumper 2-3/4" Projection x 2-1/4" High is mainly used on Hadrian Manufacturing Partitions. The hook is constructed of Zamac die cast metal that is then chrome plated and polished. And measures 2-1/4" high with a projection of 2-3/4". The manufacturer part number is 601900.
9HH900 -
Toilet Partition Continuous U Bracket Aluminum 1" X 1-3/8" X 57-1/2"
Toilet Partition Continuous U Wall Bracket For 1" Thick Panels Aluminum
Constructed of extruded anodized aluminum. Base is 1-5/16" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 1-3/8" with the thru hole at 1" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous U Wall Bracket. The manufacturers part numbers are 2364, 650-1968-58, and U Channel 1 x 57. These brackets are shipped with all the needed fasteners.9A0191C -
Continuous Two Ear Bracket Aluminum 1" Panel, 2-1/2" X 54"
Toilet Partition Continuous Two Ear Wall Bracket For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 54" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2868, and 650-8531-54. These brackets are shipped with all the needed fasteners.
9A2868 -
Accurate Partition Turn Latch & Cover
The Accurate Partition Turn Latch & Cover is used metal doors manufactured by Accurate. The concealed latch and cover are constructed of die cast metal and then chrome plated. This product sometimes goes by the numbers 50-2511390, 50-2511380, 50-8511589, 50-8511500 complete. This latch assembly was used prior to January 2013. There is no exact replacement available.
This old style lock is discontinued 1/1/2022.
See link for replacement kits
https://www.partitionsandstalls.com/partition-hardware/conc-latch-fix-it-kit.html9HACL36N -
Hadrian Toilet Partition Bottom Hinge
The Hadrian Toilet Partition Bottom Hinge is for use on 1-1/4" thick round edged pilaster posts. This hinge is considered a surface mounted hinge because is mounts on the surface of the pilaster. They are constructed of Zamac die cast metal that is then chrome plated and polished. The 9HH450, Toggle and Screw are not included with the hinge, and would have to be ordered separately. The manufacture part number on this piece is 601510 and 601500.
9HH500 -
Global Door kits Current Style : Stainless Steel
Global partitions new style door kits, used September 2021 to current. This door kit includes cast stainless steel hardware, hinges and associated parts, slide latch with indicator and door keeper, coat hook. The adder is for outswing doors that included double door pulls, stainless steel top pin and 2" door stop. All security screws included. Factory part number 8263513 for inswing parts and 8263514 for the adder which is double door pulls and door stop. The hinges have been used for over 30 years.
To order out swing version you must order both parts as pictures shown for complete door kit.
9A82 -
Partition Top Hinge Assembly For 1" Door, 1-1/4" Post
The Partition Top Hinge Assembly For 1" Door, 1-1/4" Post is for use on square edged 1-1/4" thick pilaster posts and 1" thick doors. Top hinge measures 2-1/4" high by 1-1/4" wide with screw spacing of 1-1/2". Mounting lug projects out 1-1/4". Kit includes Top Hinge, Top Hinge Pin, Top Hinge Door Insert, and mounting screws. The assembly is constructed of Zamac die cast metal that is then chrome plated and polished. Also known as a Bathroom Stall Top Hinge Kit. Manufacture part number 63720.
9A3720 -
Aluminum Continuous Two Ear Bracket 1/2" X 2-1/2" X 57-1/2"
Aluminum Continuous Two Ear Bracket 1/2" X 2-1/2" X 57-1/2". Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1/2" for 1/2" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2674. These brackets are shipped with all the needed fasteners.
9A2674 -
Stainless Steel Plated Alcove Clip Set, 2 Pieces, For 1" To 1-1/4"
Toilet Partition Alcove Clip Set, 2 Pieces, For 1" To 1-1/4" Panel Stainless Steel Plated
These clips are 1-1/2" tall x 2-1/4" wide. The screws are 1-1/2" on center, with 1/4" diameter holes. The clip is constructed of cast stainless steel material. This part is also know as Bathroom Stall Alcove Clip Set, or Toilet Partition Alcove Clip. The manufacturers part number is 8343. These clips are sold in sets with the fasteners. They are used to connect a 1" panel to a 1-1/4" panel.
9A8343





































