Search results for: 'larger gswivel hing tabl insert in dual'
-
Global Partitions Top Hinge for Surface Mount
Global Partitions Top Hinge For Flat Surface Mounting. Chrome plated Zamac die cast construction. Used with powder coated steel and stainless steel partition doors. Pivot hinge is 2-3/16" tall by 1-1/2" wide. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 3/8" diameter. Manufacturer part # 135580. Same part for Flush Metal and General Partitions. Shipped with mounting screws. A=1-7/6". Also used with Accurate Partition doors after January 2013.
9G0202 -
General Toilet Partitions Bottom Hinge 1-1/4" Round Edge
The General Toilet Partitions Bottom Hinge 1-1/4" Round Edge is for use on 1-1/4" thick round edged pilaster posts. It is constructed on Zamac die cast metal that is chrome plated and polished. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Also known as a Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3010. Shipped with mounting screws. A=1-7/6".
91000B -
Continuous Hinge Stainless Steel, 71-1/2" Rh Inswing, Lh Outswing
Continuous Hinge Stainless Steel, is 71-1/2" long by 3" wide, and is for use on Right Inswing, Left Outswing restroom stall doors. The hinge is constructed of 16 gauge (.060" thick) stainless steel and the screws are placed every 11" or so. The hinge pin is 1/8" diameter, and the mounting holes are 9/32" diameter. This hinge is also known as a Full Length Toilet Partition Continuous Hinge. The Bathroom Stall hinge can be raised up 3/8" for emergency entry. See "More Views" for handing information. Manufacture part # 7759
9A7759 -
Continuous Stainless Steel Hinge 71", Non-Handed, Zero Degree, Cam Close
Toilet Partition Stainless Steel Continuous Hinge, 71", Non-Handed, 14 Gauge, 1/4" Pin
Stainless Steel Construction 14 gauge (.075" thick). Hinge is 3" wide when laid flat, by 71" long. Holes are typically spaced every 14". The hinge pin is 1/4" diameter, and the mounting holes are 9/32" diameter. This hinge is also known as a Full Length Toilet Partition Continuous Hinge. Hinge had rounded edge 3/8" radius and is cam (gavity) self closing. Designed to be zero degree hold so that door will close flush with partition surface. The Bathroom Stall hinge can be raised up 3/8" for emergency entry.
*Fasteners not Included *
Manufacture part # 160799
9A160799 -
All American Toilet Partition Bottom Hinge
The All American Toilet Partition Bottom Hinge is for plastic laminate restroom stalls. The hinge is constructed of a die cast metal that is then chrome plated and polished. The part is for mounting on a square edged 1-1/4" thick pilaster post. The manufacture part number is 103PL.
9AA113 -
Aluminum Pilaster Stiffener
Toilet partition Aluminum Pilaster Stiffeners for restroom stalls. The Pilaster Stiffener is constructed of extruded aluminum. Measures 3-1/2" wide by 75" length. Used to help stablize restroom pilasters that carry the weight of a door or alcove panel. Typically used on pilasters that are 8" and lager in size and that support a door of 32" and larger. Designed to help provide stability to the partitions structure my making the pilaster less likey to bend, warp and break. To be installed as close as possible to the edge of the pilaster that is closest to the door. Comes pre-drilled with 14 holes and comes with screws for mounting. Can be utilized with any manufacturer for partitions but sizes could vary. Commonly known as 40-8447334(Global/Accurate), CI-76STIFFENER(Scranton) and 627240(Hadrian).
9a8447 -
Global Toilet Partitions Bottom Hinge
The Global Toilet Partitions Bottom Hinge is for use on 1-1/4" thick round edged pilaster posts. It is constructed on Zamac die cast metal that is chrome plated and polished. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Also known as a Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3010. Shipped with mounting screws. A=1-7/6".
9G0230 -
Surface Mount Door Hinge Set RH In/ LH Out
The Surface Mount Door Hinge Set RH In/ LH Out is for use on Right Hand In Swing and Left Hand Out Swinging doors. They are self closing. The hinges are constructed on stamped stainless steel that is then polished. The package includes the top and bottom hinges and the mounting screws. Hole spacing right to left 2-1/4", up and down 1-1/2", overall 3" width by 2-1/2"height. Also known as a toilet partition or bathroom stall gravity surface hinge set. Manufacture part number is 7073.
9A7070 -
World Dryer Dry Baby ABC-300HS Stainless Steel Horizontal Baby Changing Station
DryBaby stainless steel baby changing station is a horizontal unit that has a stainless steel exterior finish. Designed with pneumatic gas shocks to provide smooth operation, able to be pulled down as well as fasten safety belt with one hand. Features bag hooks at front corners and dual bed liner dispensers. Comes with easy step by step installation instructions and is ADA complaint when installed in accordance to instructions provided. Easy to maintain as High-density polyethylene inhibits bacterial growth and odor resistant. Known as World Dryers part number ABC-300HS.
- Stainless Steel Exterior, with High-Density Polyethylene Interior
- Horizontal Surface Mount Design
- Unit Size: 21.5”x37.5”x4”
- ADA and ANSI Compliant when mounted according to instructions
- Design for children up to 3.5 years or age and weighing up to 50 lbs, Meets ASTM F2285
- Smooth Opening and Closing Motion with Pneumatic gas shock mechanism
- CPSIA Compliant to applicable sections
- Resistance to Fungi(ASTM G21) and Bacteria(ASTM G22)
- Features built in liner dispenser, Liners(ABC-300L)
- Replacement Strap (93-10075)
- Recessed Stainless Steel Unit(ABC-300HSR) Available
- 5 yr Limited Warranty
WD-ABC300HS -
Knickerbocker Toilet Partition Bottom Hinge
The Knickerbocker Toilet Partition Bottom Hinge is used on round edged 1-1/4" thick pilaster posts. It features chrome plated Zamac die cast construction. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" to center hole with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3420. A=1-11/16"
9K0230 -
SS Piano Hinge 57" 14 Gauge,1/4" Pin 20 Degree Cam Close
Partition Door Piano Hinge 57", 14 Gauge SS,1/4" Pin with 20 Degree Cam Close. This hinge keeps the door open 20 degree so the user knows there is nobody in the restroom toilet stall. This is the most Heavy Duty Continuous Full Length Hinge we sell. 14 gauge (.075" thick) stainless steel construction with a 1/4" diameter hinge pin. The hinge leafs are angle cut so your door will close with the camming action. The hinge is 3" wide when laid flat, and 57" long. Screws are spaced 11" apart and the holes are 9/32" diameter and has 6 sets of holes. Hinge can be raised up 3/8" for emergency entry. Also known as a Restroom Toilet Stall Full Length Continuous Hinge. Manufacturer part #650-9401 and 160039. The hinges must be mounted flat when door is shut. For inside swing the hinges are mounted on the inside of the stall. For the outside they must be mounted on the outside.
9A9401 -
Toilet Partition Surface Mounted SS Hinge Set Lh Out, Rh Inswing
The Toilet Partition Surface Mounted SS Hinge Set are for use on Left Hand Out Swing and Right Hand In Swinging Doors. They feature 1/8" thick stainless steel construction. Outside hinge measurements are 3-1/4" wide by 2-29/32" high. 1-1/2" hole spacing up and down, and 2-3/8" right to left hole spacing. The four mounting holes are 1/4" diameter. This hinge set includes the top and bottom hinges. Also known as Bathroom Stall Gravity Hinge Set. See "More Views" for the handing diagram. Manufacturer part # 7113. Mounting screws are included.
9A7SS2 -
Partition Surface Mounted S.S. Hinge Set- Rh In, Lh Outswing
The Partition Surface Mounted SS Hinge Set are for use on Right Hand Inswing and Left Hand Out Swinging Doors. One of the better reasons to use this hinge is the fact that they have a stainless steel pin. Nearly all of the Gravity Hinges out there use plastic pins. Stainless Steel construction, 1/8" thick. Outside dimensions of the hinge are 3-5/16" wide by 2-7/8" high. The screw spacing is 2-5/16" wide by 1-1/2" high. The mounting holes are 1/4" diameter. For use on a left hand outswing door, or right hand inswing door. See "More Views" for the handing diagram. Also known as a Bathroom Stall Gravity Hinge Set, or Toilet Partition Surface Mounted Hinge Set. Manufacture part # 7093. Shipped with mounting screws.
9A7093 -
Continuous Hinge Stainless Steel, 57-1/2, Rh Inswing Lh Outswing
The Continuous Hinge Stainless Steel 57-1/2" long, is for use on Right Hand Inswing, Left Outswing restroom stall doors. The hinge is constructed of 16 gauge (.060" thick) stainless steel with 4 springs. It measures 3" wide when laid flat x 57-1/2" long with a 1/8" diameter hinge pin. Mounting screws are located every 11" or so. Can be raise up 3/8" for emergency entrance and springs allow the door to seft close. Also known as a Bathroom Stall Piano Hinge, or Full Length Stainless Steel Continuous Piano Hinge. Manufacture part # 7659. Shipped with all the fasteners.
Rh Inswing or Lh Outswing See Diagram
9A70C2 -
Hadrian Toilet Partition Top Hinge Pin
The Hadrian Toilet Partition Top Hinge Pin is used to replace the old style hinge pin. If you have the old style you must also purchase the upper hinge. This hinge is used with the 9HH350, 9HH300, 9HH550, 9HH500 and also the Arch Hinges. The manufacturer's part number is 631400. This product uses a phillips head screwdriver, old style was a torx head. The dimensions are 3/8" diameter by 1-1/2" height.
9HH400 -
Universal Stainless Steel Handing Hinge
Universal Stainless Steel Handing Hinge Surface mounted. This hinge is universal which means this can be in or out swing and right or left hinged. This hinge is 1/8" thick, overall width is 3" x 3-3/8" ht. The hole spacing is 2" x 1-1/2" up and down. The manufacturer's part number is 650-8241, 7199. Hardware included for 1" door and 1-1/4" thick post.
9A8241 -
One Ear Hinged Bracket , 3 X 2-1/2 X 1
The One Ear Hinged Bracket , 3" by 2-1/2" by 1" is constructed of 16 ga (.050") thick for the hinge and 14 ga (.075") thick on the bracket, stainless steel. The one ear hinged bracket is Riveted and welded together. Bracket is 3" high x 2-1/2" deep for a 1" panel. This bracket is ideal for applications were the Pilaster and Panels are not at a 90 degree angle. Also known as a Bathroom Stall Hinged Wall Bracket. Manufacture part # 111359.
9A1359 -
Partition Surface Mounted Hinge Set Rh Out, Lh Inswing
The Partition Surface Mounted Hinge Set is for use on Right Out Swing and Left Hand In Swinging doors. The hinges raise the door up 1/4" when opening, and then gravity causes the door to shelf close. They measure 1-1/2" center to center hole spacing on the vertical and 2-7/16" center to center on the horizontal. Constructed of cast brass with chrome plating and polished. They are also known as a Bathroom Stall Gravity Hinge Set. Manufacture part # 7021.
9A70B1 -
General Partition Bottom Hinge For 1-1/4" Sq Edge
The General Partition Bottom Hinge For 1-1/4" Sq Edge is for use on an 1-1/4" square edged pilaster post. It is constructed of Zamac die cast metal that is then chrome plated and polished. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a Fiat Bathroom Stall Pivot Hinge Bottom 1-1/4". Also known as General, American Sanitary, Flush Metal, Fiat Tiolet Partition 9F0301, 9AM280, 9FL700. Manufacture part # 3290. Shipped with mounting screws. A=1-5/8"
91000P -
Continuous Hinge Stainless Steel 57-1/2, Lh Inswing, Rh Outswing
The Continuous Hinge Stainless Steel 57-1/2" long, is for use on Left Hand Inswing, Right Outswing restroom stall doors. The hinge is constructed of 16 gauge (.060" thick) stainless steel with 4 springs. It measures 3" wide when laid flat x 57-1/2" long with a 1/8" diameter hinge pin. Mounting screws are located every 11" or so. Can be raise up 3/8" for emergency entrance and springs allow the door to seft close. Also known as a Bathroom Stall Piano Hinge, or Full Length Stainless Steel Continuous Piano Hinge. Manufacture part # 7669. Shipped with all the fasteners.
Lh Inswing or Rh Outswing See Diagram
9A70C1 -
Partition Surface Mounted Hinge Set Lh Out, Rh Inswing
The Partition Surface Mounted Hinge Set is for use on Left Hand Out Swing and Right Hand Hand In Swinging doors. The hinges raise the door up 1/4" when opening, and then gravity causes the door to shelf close. They measure 1-1/2" center to center hole spacing on the vertical and 2-7/16" center to center on the horizontal. Constructed of cast brass with chrome plating and polished. They are also known as a Bathroom Stall Gravity Hinge Set. Manufacture part # 7011.
9A70B2 -
Toilet Partition Top Hinge 1-1/4" Round Edge
The Toilet Partition Top Hinge 1-1/4" Round Edge is constructed of Zamac die cast metal that is then chrome plated and polished. This hinge is used on 1-1/4" thick round edged pilaster posts. The outside dimensions of the hinge are 1-1/4" deep by 2-1/2" high by 1-7/16" wide. The U mounting channel is 2-1/8" high by 1-1/4" deep with a slot depth of 11/16". The mounting holes are 1-1/2" apart on center. The lug projects out 1-3/32" by 13/32" thick with a 3/8" diameter bushing. Also know as a Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 4530. Used on Ampco and Metpar Metal Partitions. Shipped with mounting screws. A=1-7/16"
9C3503 -
Generic 8" Bottom Hinge Repair Kit, Plastic Rod
Generic Plastic Rod fits most manufactures like Global, Hadrian, Accurate Toilet Partitions. These might not fit exactly. Shave off two sides to make smaller. The configuration is the same for all manufactures, some just a little wider in the diameter. This is the replacement hinge pin on there Solid Plastic bottom hinges. Also known as a Bathroom Stall 8" Bottom Repair Kit. Manufacture part # 8475.
9HHGB-BOTTOM -
Heavy Duty Vault Hinge Set Stainless Steel, For 3/4" Or 1"
The Heavy Duty Vault Hinge Set Stainless Steel, for 3/4" Or 1" thick doors is used by all of the manufactures on their Solid Plastic (HDPE) Restroom dividers. The hinges are designed for 3/4" to 1" thick doors and 3/4" to 1" thick pilaster posts. They use this style hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a Bathroom Stall Roller Bearing Hinge Set. Manufacture part # 7813. Shipped with mounting screws.
9A7813 -
Accurate Partition Top and Bottom Hinge
The Accurate Partition Top and Bottom Hinge kit is for 1-1/4" round edge pilasters or posts. These are used on Accurate Partition Corp's, metal doors sold before January 2013. The kit includes the top and bottom hinges, pins and security screws. Hinges are constructed of die cast metal that is then chrome plated and polished. The manufactures part numbers are 50-8517300, 50-2517200 and 50-398660. A=1-1/2". There is no exact hinge replacement available.
**Not Available anymore, see link for new doors
https://www.partitionsandstalls.com/accurate-partition-steel-doors.html
https://www.partitionsandstalls.com/partition-hardware/hinges/surface-mounted-hinge-sets.html
https://www.partitionsandstalls.com/partition-hardware/hinges/continuous-piano-hinges.html
9HAH15 -
Hiny Hider 8" Ada Hinge Set
The Hiny Hider 8" ADA Hinge Set includes 3 hinges, one for the top, bottom and intermediate locations. They constructed of clear anodized aluminum and are usually for 1" thick panels and 1" thick doors. This hinge set meets ADA Compliance. Used by every Bathroom Toilet Stall manufacture on Solid Plastic Toilet Partitions Doors. Manufacturer part #'s 7978, 7988, 8974, and 8984. These hinges are reversible by taking the 3 pieces apart and reconfiguring the opposite swing.
9HHGBADA -
General Toilet Partitions Top Hinge For Steel
The General Partitions Top Hinge is constructed of Zamac die cast metal that is chrome plated and polished. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" and is 1/2" thick with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 3910. A=1-11/16".
96320A -
Surface Mounted S.S. Square Barrel Hinge Set- Lh Out, Rh Inswing
The Surface Mounted. Square Barrel Hinge Set- Left Hand Out Swing and Right Hand In swing are our most heavy duty hinges. They are constructed of 1/8" thick stainless steel. 1-1/2" hole spacing up and down and 2-3/8" right to left hole spacing. Outside dimensions are 3-1/8" wide x 3" high. Also known as Bathroom Stall Gravity Hinge Sets. Manufacture part # 7052. Includes all screws.
9A7052 -
Global Partitions Bottom Hinge for Surface Mount
Global Partitions Bottom Hinge For Surface Mount. Chrome plated Zamac die cast construction. Used with powder coated steel and stainless steel partition doors. Pivot hinge is 2-3/16" tall by 1-1/2" wide. The hole spacing is 1-1/2" on center. The lug projects out 1-9/16" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Manufacture part # 3010, 111710. Also used with Flush Metal and General Partitions. Shipped with mounting screws. A=1-9/16". Also used with Accurate Partition doors after January 2013.
9G0201 -
Partition Door Piano Hinge W/Cover lh in/rh out 54" aluminum anodized
Partition Door Piano Hinge W/Cover lh in/rh out 54" aluminum anodized is a heavy duty 1/4" pin with spring to close. this hinge has 5 holes on each side with 13" centers and starts at 1" from top and bottom. The cover makes the hinge holes not as noticeable. Also known as 8684.
9A8684