Search results for: 'restroom desk kit inswing 7 8 doan'
-
Toilet Partition Top Hinge Door Escutcheon For 7/8" Thick Door
The Toilet Partition Top Hinge Door Escutcheon For 7/8" Thick Doors has chrome plated Zamac die cast construction. The outside dimensions of the escutcheon are 1" deep by 1-5/8" high by 2-3/8" wide with two of the three holes with a diameter of 5/16" and one at 7/32". The inside dimensions of the U are 1" high by 2-1/16" wide. Also known as a Bathroom Stall Door Insert - Top 7/8". Manufacture part # 2740. Used on Metpar and AMPCO Toilet Partitions.
9CP425 -
Stainless Steel Slide Bolt Latch 1-7/8" Screws
Partition Surface Mounted Stainless Steel Slide Bolt Latch 1-7/8" Screws. Stamped stainless steel construction. Base is 2-7/8" high by 1-3/8" wide by 5/32" thick. Latch bolt is 2-1/4" long x 13/16" wide x 1/8" thick, and the slide distance is 25/32". Also known as a Bathroom Stall Stainless Steel Slide Latch and Toilet Partition Locks. Manufacture part # 6309. Shipped with mounting screws.
9A7055 -
Ampco Toilet Partition Bottom Door Insert For 7/8" Door
The Ampco Toilet Partition Bottom Door Insert For 7/8" Door is constructed of Zamac die cast metal and then chrome plated. The door insert measures 2-5/16" wide by 1" wide by 1-3/16" high. The hex shaped hole is 5/8" and the round hole is 7/32" diameter. The material or rim is 5/16" high. Also known as a Bathroom Stall Door Insert Bottom 7/8". Manufacture part # 1530.
9CP325 -
Hiny Hider Inswing Flat Stop 6"
The Hiny Hider Inswing Flat Stop 6" has Clear anodized aluminum construction. The strike and keeper is 6" tall by 2-9/16" deep and 3/4" thick on the stop. The material is 1/8" thick. The mounting holes are 3" on center. And the locking slot is 1-1/2" high by 3/8" deep. Also known as a Bathroom Stall Strike and Keeper-Inswing Flat. Manufacture part # 5798. Shipped with mounting screws.
9A5798 -
Sanymetal Toilet Partition Keeper 2" Between Screws
The Sanymetal Toilet Partition Keeper 2" Between Screws is constructed of Zamac die cast metal that is then chrome plated and polished. Keeper base is 3" high by 1-1/16" wide with a 2" hole spacing. Strike is 3" tall by 7/8" deep. The material 1/8" thick. The slot is 1-1/8" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5130. Shipped with mounting screws.
9S2401 -
Generic 8" Bottom Hinge Repair Kit, Plastic Rod
Generic Plastic Rod fits most manufactures like Global, Hadrian, Accurate Toilet Partitions. These might not fit exactly. Shave off two sides to make smaller. The configuration is the same for all manufactures, some just a little wider in the diameter. This is the replacement hinge pin on there Solid Plastic bottom hinges. Also known as a Bathroom Stall 8" Bottom Repair Kit. Manufacture part # 8475.
9HHGB-BOTTOM -
One Ear Bracket Stainless Steel 7/8" Panel 1-1/2" X 2-1/2"
Toilet Partition One Ear Bracket For 7/8" Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 2-5/16" with the mounting screws are 1-13/32" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and One Wing Bracket. Manufacturer part # 1659.
Shipped with screws
9A1659 -
Partition Two Ear Bracket Cast SS For 7/8" Panel
Partition Two Ear Wall Bracket For 7/8" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 3-1/2" with 2-3/4" hole spacing. Bracket walls are 1/8" thick. The legs project out 2-1/2" with the thru holes at 2-1/8" from the bottom of the base. Also known as a Bathroom Stall Two Ear Wall Bracket, or Two Ear 7/8". Manufacture part # 1633
Shipped with mounting screws.
9A1633 -
Knickerbocker Partition Door Latch Mechanism Kit
The Knickerbocker Partition Door Latch Mechanism Kit is used on there concealed latches. The bar measures 11/32" diameter by 3-7/16" long. The Fulcrum measures 1-11/32" by 1-11/32 by 5/16" thick. This part is also known as 8836, H749 and H748. Works with General partitions. Used with plastic laminate toilet partitions.
9K0253 -
Concealed Latch Keeper Bumper Inswing Cast SS 1-1/4" Round Edge
Concealed Partition Latch Keeper Bumper Inswing 1-1/4" Round Edge Cast Stainless Steel
Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 1/4" deep. The opening to mount it on the round edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5583.
Shipped with screws for mounting.
9A5583 -
Continuous Stainless Steel U Bracket 71", 7/8"x1-1/2"
Toilet Partition Stainless Steel Continuous U Bracket, 71", 7/8"x1-1/2" 18 Gauge.
Stainless Steel Construction 18 gauge. U bracket is for 7/8" wide partitions and is 1-1/2" height and 71" long. Holes are typically spaced every 13-1/2" vertically. This bracket is also known as a Full Length Toilet Partition Continuous U Bracket 71". Bracket has rounded edge radius. Designed to attach pilasters and/or panels to walls. Continuous brackets help eliminate sightline into stalls.
*Fasteners not Included *
Manufacture part # 204099
9A204099 -
Partition Concealed Keeper Bumper Inswing Cast SS
Concealed Partition Latch Keeper Bumper Inswing Cast Stainless Steel
Stainless steel casting. The strike and keeper is 1-1/4" high by 2-1/2" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. The slots are 1/4" deep. Also known as a Bathroom Stall Strike and Keeper Inswing Flat. Manufacture part # 5653.
Shipped with mounting screws.
9A5653 -
Toilet Partition U Bracket Cast SS 7/8" Panel, 1-1/2" X 1-3/8" L
Toilet Partition U Bracket For 7/8" Thick Panel Cast Stainless Steel
Cast stainless steel construction. Bracket base is 1-3/8" x 1-5/32" with two mounting screw holes. Bracket legs project out 1-3/8" with the thru hole at 1" on center from the bottom of the base. Also known as a Bathroom Partition Stall U-Bracket or Wall Bracket 7/8". Manufacture part number 1903
Shipped with mounting screws
9A1903 -
Toilet Partition Surface Mounted SS Hinge Set -Rh Out, Lh Inswing
The Toilet Partition Surface Mounted SS Hinge Set are for use on Right Hand Out Swing and Left Hand Inswinging Doors. They feature 1/8" thick stainless steel construction. Outside hinge measurements are 3-1/4" wide by 2-29/32" high. 1-1/2" hole spacing up and down, and 2-3/8" right to left hole spacing. The four mounting holes are 1/4" diameter. This hinge set includes the top and bottom hinges. Also known as Bathroom Stall Gravity Hinge Set. See "More Views" for the handing diagram. Manufacturer part # 7123. Mounting screws are included.
9A7SS1 -
Continuous Stainless Steel Two Ear Bracket 71", 7/8"x2-1/2"
Toilet Partition Stainless Steel Continuous Two Ear Bracket, 71", 7/8"x2-1/2" 18 Gauge.
Stainless Steel Construction 18 gauge.Two ear bracket is for 7/8" wide partitions and is 2-1/2" height by 3-1/2" wide by 71" long. Holes are typically spaced every 13-1/2" vertically. This bracket is also known as a Full Length Toilet Partition Continuous Two Ear Bracket 71". Bracket has rounded edge radius. Designed to attach pilasters and/or panels to walls. Continuous brackets help eliminate sightline into stalls.
*Fasteners not Included *
Manufacture part # 204079
9A204079 -
Global Toilet Partition Nylon Cam For Steel
The Global Toilet Partition Nylon Cam For Steel restrooms is constructed of white nylon plastic. Square part of nylon cam is 7/8" by 1-1/8" with a diameter of 11/16". The cam has an overall height of 1-1/4", with a cylinder diameter of 7/8". Also known as a Bathroom Stall Cam. Manufacture part # 98185.
9G0232 -
Metpar Toilet Partition Nylon Cam For Steel
The Metpar Toilet Partition Nylon Cam For Steel restrooms is constructed of white nylon plastic. Square part of nylon cam is 7/8" by 1-1/8" with a diameter of 11/16". The cam has an overall height of 1-1/4", with a cylinder diameter of 7/8". Also known as a Bathroom Stall Cam. Manufacture part # 98185.
9C3002 -
Partition Keeper Bumper Flat Stop Chrome Plated 1-1/2" Screws
Chrome Plated Toilet Partition Keeper Bumper Flat Stop 1-1/2" Between Screws
Polished chrome plated Zamac construction. The strike and keeper measure 2-1/2" high by 1-13/16" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. The slot is for the concealed latch is 7/8" high by 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5240
Shipped with mounting screws.
9A5240 -
General Toilet Partition Nylon Cam For Steel
The General Toilet Partition Nylon Cam For Steel For Steel restrooms is constructed of white nylon plastic. Square part of nylon cam is 7/8" by 1-1/8" with a diameter of 11/16". The cam has an overall height of 1-1/4", with a cylinder diameter of 7/8". Also known as a Bathroom Stall Cam. Manufacture part # 98185.
91002B -
Partition Surface Door Stop Cast SS 1-1/2" Screws
Cast Stainless Steel Partition Door Stop
Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-7/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5173.
Shipped with mounting screws.
9A5173 -
Partition Keeper Bumper Cast SS Inswing 1-1/2" Screws
Partition Keeper Bumper Inswing 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-19/32" on center. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5143.
Shipped with mounting screws.
9A5143 -
Toilet Partitions Bumper Keeper Chrome Plated 1-1/4" Round Edge
Chrome Plated Toilet Partitions Bumper Keeper For 1-1/4" Round Edge
Polished chrome plated Zamac construction. The strike and keeper measures 2-1/2" tall by 1-7/8" wide. The mounting holes are 1-1/2" on center. The stop measures 3/4" wide by 17/32" deep with a rubber insert bumper. Slot is 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5430.
Shipped with mounting screws.
9A5430 -
Sanymetal Toilet Partition Door Stop
The Sanymetal Toilet Partition Door Stop is constructed of Zamac die cast metal that is then chrome plated and polished. The strike and keeper measure 2-1/2" high by 1-7/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5170. Shipped with mounting screws.
9S2704 -
Two Ear Bracket 7/8" Panel, 1-1/2" X 2-1/2"
Toilet Partition Two Ear Wall Bracket For 7/8" Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 3-13/16" with the mounting screws are 2-13/16" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and Two Wing Bracket. Manufacturer part # 1639.
Shipped with screws
9A1639 -
U Bracket Stainless Steel 7/8" Panel, 1-1/2" X 1-1/2"
Toilet Partition "U" Wall Bracket For 7/8" Thick Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 1-1/8". Leg project out 1-1/2" with the thru hole at 1-1/8" from the base. The 4 thru holes are 1/4" diameter, two of them are the mounting holes. Also known as a Bathroom Stall U Wall Bracket. Manufacturer part # 1909.
Shipped with screws
9A1999 -
Partition Surface Mounted S.S. Hinge Set- Rh In, Lh Outswing
The Partition Surface Mounted SS Hinge Set are for use on Right Hand Inswing and Left Hand Out Swinging Doors. One of the better reasons to use this hinge is the fact that they have a stainless steel pin. Nearly all of the Gravity Hinges out there use plastic pins. Stainless Steel construction, 1/8" thick. Outside dimensions of the hinge are 3-5/16" wide by 2-7/8" high. The screw spacing is 2-5/16" wide by 1-1/2" high. The mounting holes are 1/4" diameter. For use on a left hand outswing door, or right hand inswing door. See "More Views" for the handing diagram. Also known as a Bathroom Stall Gravity Hinge Set, or Toilet Partition Surface Mounted Hinge Set. Manufacture part # 7093. Shipped with mounting screws.
9A7093 -
Mills Toilet Partitions Keeper Bumper Concealed
The Mills Toilet Partitions Keeper Bumper Concealed is for use on 1-1/4" thick round edged pilaster posts. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. They are constructed of Zamac die cast metal that is then chrome plated and polished. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5590. Shipped with mounting screws.
90T317 -
Partition Keeper For Throw Latch
The Partition Keeper For Throw Latch is for use on inswinging doors. Keeper base is 2-1/2" high by 1-3/16" wide with a 1-1/2" hole spacing. Strike is 2-1/2" tall by 7/8" deep. The material 1/8" thick. The slot is 13/16" high by 1/4". They are constructed of Zamac die cast metal that is then chrome plated and polished. Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5180. Shipped with mounting screws.
9S2701 -
Global Toilet Partitions Keeper Bumper Concealed
The Global Toilet Partitions Keeper Bumper Concealed is for used with concealed latches and 1-1/4" thick square edged pilaster posts. It is constructed of Zamac die cast metal that is chrome plated and polished. The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5230. Shipped with mounting screws.
9G631H