Stainless Steel| Generic

All keeper bumpers and stops are in stock for fast delivery. Replacing old hardware with new will change your bathroom's to looking new again. All Partition keeper bumpers will come with security screws. All throw latch keepers are required for all handicap doors over 32", 34", 36" width for easy access to the inside door.
RBA Partitions and Parts Catalog

Filter
View as Grid List

31 Items

per page
Set Descending Direction
  1. Partition Surface Keeper Inswing Cast SS 1-1/2" Screws

    Partition Inswing Surface Keeper 1-1/2" Between Screws Cast Stainless Steel

    Cast stainless steel construction. The keeper base is 2-1/2" tall by 1-3/32" wide. The latch face measures 2-1/2" tall with a 7/8" projection. The hole spacing is 1-1/2". The slot measures 5/16" by 1-9/16". Also known as a Bathroom Stall Keeper-Inswing Flat. Manufacture part # 5163.

    Shipped with mounting screws.

    9A5163
    $13.80
  2. Partition Keeper Bumper Cast SS For 1" Sq Post

    Partition Keeper Bumper For 1" Square Post Outswing Cast Stainless Steel

    Cast stainless steel construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Outswing 1". Manufacture part # 5723.

    Shipped with mounting screws.

    9A5723
    $18.04
  3. Partition Keeper Bumper Cast SS For 1-1/4" Sq Post

    Partition Keeper Bumper For 1-1/4" Square Post Outswing Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5213.

    Shipped with mounting screws.

    9A5213
    $19.00
  4. Toilet Partition Keeper Bumper Inswing Cast SS 1" Post Sq Edge

    Partition Keeper Bumper Inswing 1" Post Square Edge Cast Stainless Steel

    Cast stainless steel construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. The slot is 5/16" deep by 1-1/2" high. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing 1". Manufacture part # 5623.

    Shipped with mounting screws.

    9A5623
    $24.00
  5. Partition Keeper Bumper Inswing Cast SS 1" Sq Edge

    Partition Keeper Bumper Inswing 1" Square Edge Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 1". Manufacture part # 5823.

    Shipped with mounting screws.

    9A5823
    $20.00
  6. Partition Keeper Bumper Cast SS Inswing 1-1/2" Screws

    Partition Keeper Bumper Inswing 1-1/2" Between Screws Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-19/32" on center. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5143.

    Shipped with mounting screws.

    9A5143
    $16.45
  7. Partition Keeper Bumper Cast SS Inswing 1-1/4" Post Sq Edge

    Partition Keeper Bumper Inswing 1-1/4" Post Square Edge Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5113.

    Shipped with mounting screws.

    9A5113
    $18.98
  8. Partition Keeper Bumper Cast SS Inswing 1-1/4" Sq Edge

    Partition Keeper Inswing 1-1/4" Square Edge Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. The slot measures 13/16" high by 1/4" deep. Commonly known as a Bathroom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5343.

    Shipped with mounting screws.

    9A5343
    $20.30
  9. Partition Keeper Bumper Cast SS Inswing 3/4"

    Partition Keeper Bumper Inswing 3/4" Square Edge Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 3/4". Manufacture part # 4903.

    Shipped with mounting screws.

    9A4903
    $22.00
  10. Partition Keeper Bumper Outswing Cast SS 1-1/2" Screws

    Partition Keeper Bumper Outswing 1-1/2" Between Screws Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-5/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5263.

    Shipped with mounting screws.

    9A5263
    $15.18
  11. Partition Keeper Flat Stop Cast SS 1-1/2" Screws

    Partition Keeper Flat Stop 1-1/2" Between Screws Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-1/2" on center. Slots are 1/4" deep by 13/16" high. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5283.

    Shipped with mounting screws.

    9A5283
    $16.45
  12. Partition Surface Door Stop Cast SS 1-1/2" Screws

    Cast Stainless Steel Partition Door Stop

    Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-7/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5173.

    Shipped with mounting screws.

    9A5173
    $13.50
  13. Partition Cast Stainless Steel Inswing Keeper

    Cast Stainless Steel Partition Keeper 1-1/2" Between Screws

    Cast stainless steel construction. Keeper base is 2-1/2" high by 1-3/16" wide with a 1-1/2" hole spacing. Strike is 2-1/2" tall by 7/8" deep. The material 1/8" thick. The slot is 13/16" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5183.

    Shipped with mounting screws.

    9A5183
    $15.18
  14. Partition Concealed Latch Keeper Bumper Cast SS 1"

    Concealed Partition Latch Keeper Bumper 1" Square Edge Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measures 2-1/2" tall by 1-15/16" wide by 1-17/32 deep. The mounting holes are 1-1/2" on center. The stop measures 7/8" wide by 17/32" deep with a rubber insert bumper. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1". Manufacture part # 5733.

    Shipped with mounting screws.

    9A5733
    $27.83
  15. Concealed Latch Keeper Bumper Cast SS 1-1/4" Post Round Edge

    Concealed Partition Latch Keeper Bumper 1-1/4" Post Round Edge Cast Stainless Steel

    Cast stainless steel construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5513.

    Shipped with mounting screws.

    7/16" X 3/4" SLOT

    9A5513
    $17.00
  16. Partition Concealed Latch Keeper Bumper Cast SS 1-1/4"

    Concealed Partition Latch Keeper Bumper 1-1/4" Square Edge Cast Stainless Steel

    Cast stainless steel construction. The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5233.

    Shipped with mounting screws.

    9A5233
    $29.10
  17. Partition Concealed Latch Keeper Bumperr 1-1/2" Screws

    Concealed Partition Latch Keeper Bumper For 1-1/2" Between Screws Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-13/16" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. The slot is for the concealed latch is 7/8" high by 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5243

    Shipped with mounting screws.

    9A5243
    $15.18
  18. Partition Concealed Keeper Bumper Inswing Cast SS

    Concealed Partition Latch Keeper Bumper Inswing Cast Stainless Steel

    Stainless steel casting. The strike and keeper is 1-1/4" high by 2-1/2" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. The slots are 1/4" deep. Also known as a Bathroom Stall Strike and Keeper Inswing Flat. Manufacture part # 5653.

    Shipped with mounting screws.

    9A5653
    $41.75
  19. Concealed Latch Keeper Bumper Inswing Cast SS 1-1/4" Round Edge

    Concealed Partition Latch Keeper Bumper Inswing 1-1/4" Round Edge Cast Stainless Steel

    Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 1/4" deep. The opening to mount it on the round edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5583.

    Shipped with screws for mounting.

    9A5583
    $19.60
  20. Cast SS Concealed Latch Keeper Bumper Inswing 1-1/4" Sq Edge

    Concealed Latch Keeper Bumper Inswing For 1-1/4" Square Edge Post Cast Stainless Steel

    Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5983

    Shipped with screws for mounting.

    9A5983
    $16.45
  21. Toilet Partition Concealed Latch Keeper Bumper Outswing Cast SS

    Concealed Latch Keeper Bumper Outswing Cast Stainless Steel

    Cast Stainless Steel casting. The strike and keeper is 1-1/4" high by 1-3/4" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5643.

    Shipped with mounting screws.

    9A5643
    $27.83
  22. Concealed Latch Keeper Bumper Cast SS Outswing 1-1/4" Round Edge

    Concealed Partition Latch Keeper Bumper Outswing 1-1/4" Round Edge Cast Stainless Steel

    Cast stainless Steel Construction. The outside dimensions are 2-3/8" wide by 1-1/4" high by 1-3/4" deep. Stop projects out 1-1/8" by 1/2" thick with a rubber insert. Designed for an 1-1/4" thick post round edge. Also known as a Bathroom Stall Strike and Keeper Outswing 1-1/4". Manufacture part # 5573.

    Shipped with mounting screws.

    9A5573
    $18.00
  23. Cast SS Concealed Latch Keeper Bumper Outswing 1-1/4" Sq Edge

    Concealed Partition Latch Keeper Bumper Outswing 1-1/4" Square Edge Cast Stainless Steel

    Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-13/16" deep. The strike is 1/2" thick with rubber insert. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5973.

    Shipped with screws for mounting.

    9A5973
    $16.45
  24. Toilet Partition Concealed Latch Keeper Bumper Cast SS 1-1/4" Sq Edge

    Concealed Partition Latch Keeper Bumper 1-1/4" Square Edge Cast Stainless Steel

    Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-3/4" deep. The strike is a1/2" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5963.

    Shipped with screws for mounting.

    9A5963
    $29.10
  25. Strike//Keeper Stainless Steel For 3/4" Door Inswing

    Partition Strike/Keeper For 3/4" Door Inswing 1-7/8" Between Screw Stamped Stainless Steel

    Stamped stainless steel .075" thickness construction. The strike and keeper measures 2-7/8" tall by 2" wide by 1-15/16" deep with a 1-7/8" hole spacing. The stop is 7/16" thick with a rubber insert. Also known as a Bathroom Stall Strike and Keeper Inswing 3/4". Manufacture part # 6469.

    Shipped with mounting screws.

    9A6469
    $6.65
  26. Toilet Partition Keeper Stamped Stainless Steel 1-7/8" Between Screws

    Partition Keeper 1-7/8" Between Screws Stamped Stainless Steel

    Stamped stainless steel .075" thick construction. The keeper measures 2-5/8" high by 1-3/8" wide with a 1-7/8" hole spacing. The slot is 1-5/16" high by 5/16" high. Also known as a Bathroom Stall Keeper - Inswing. Manufacture part # 6499.

    Shipped with mounting screws.

    9A6499
    $2.88
  27. Partition Keeper Bumper Stainless Steel Inswing 1-7/8" Screws

    Toilet Partition Keeper Bumper Inswing With 1-7/8" Between Screws

    Stainless steel construction, 14 gauge (.075" thick). Plate measures 2-7/8" high x 1-7/8" wide including lugs. Lugs are 7/8" high and 9/16" thick. Screw holes are 1/4" diameter. Sometimes called Bathroom Stall Strike and Keeper-Inswing/Outswing Flat. Manufacuture part # 6329 and 650-8226.

    Screws are included with this keeper.

    9A7057
    $10.12
  28. Keeper Stainless Steel For 1" Door, 1-7/8" Between Screws

    Partition Strike And Keeper For 1" Door, 1-7/8" Between Screws, Stamped Stainless Steel

    Stamped stainless steel .075" thick construction. The strike and keeper measure 2-7/8" high by 2" wide with a 1-7/8" hole spacing. The stop posts are 5/8" wide by 7/8" tall with rubber inserts. For use with 1" square edge posts. Also known as a Bathroom Stall Strike and Keeper Outswing 1". Manufacture part # 6459.

    Shipped with mounting screws.

    9A6459
    $11.39
  29. Keeper Stmped Stainless Steel For 3/4" Door, 1-7/8" Between Screws

    Partition Strike And Keeper For 3/4" Door, 1-7/8" Between Screws Stamped Stainless Steel

    Stamped stainless steel .075" thick construction. The strike and keeper measure 2-7/8" high by 2" wide with a 1-7/8" hole spacing. The stop posts are 5/8" wide by 7/8" tall with rubber inserts. For use with 3/4" square edge posts. Also known as a Bathroom Stall Strike and Keeper Outswing 3/4". Manufacture part # 6379.

    Shipped with mounting screws.

    9A6379
    $6.65
  30. Keeper Inswing Stainless Steel 1-7/8" Between Screws

    Toilet Partition Keeper For Inswing Doors 1-7/8" Between Screws Stainless Steel

    14 gauge (.075" thick) stainless steel construction. Keeper is 2-7/8" high x 1-13/16" wide with 1-7/8" hole spacing. Lip is 9/16" and the slot or cut out is 7/32" x 1". Also known as Bathroom Stall Keeper Inswing. Manufacture part # 6319.

    Shipped with screws.

    9A7056
    $7.59
View as Grid List

31 Items

per page
Set Descending Direction