Search results for: 'shower dual hand set 2 1 4 braze'
-
Toilet Partition Surface Mounted SS Hinge Set Lh Out, Rh Inswing
The Toilet Partition Surface Mounted SS Hinge Set are for use on Left Hand Out Swing and Right Hand In Swinging Doors. They feature 1/8" thick stainless steel construction. Outside hinge measurements are 3-1/4" wide by 2-29/32" high. 1-1/2" hole spacing up and down, and 2-3/8" right to left hole spacing. The four mounting holes are 1/4" diameter. This hinge set includes the top and bottom hinges. Also known as Bathroom Stall Gravity Hinge Set. See "More Views" for the handing diagram. Manufacturer part # 7113. Mounting screws are included.
9A7SS2 -
Toilet Partition Surface Mounted SS Hinge Set -Rh Out, Lh Inswing
The Toilet Partition Surface Mounted SS Hinge Set are for use on Right Hand Out Swing and Left Hand Inswinging Doors. They feature 1/8" thick stainless steel construction. Outside hinge measurements are 3-1/4" wide by 2-29/32" high. 1-1/2" hole spacing up and down, and 2-3/8" right to left hole spacing. The four mounting holes are 1/4" diameter. This hinge set includes the top and bottom hinges. Also known as Bathroom Stall Gravity Hinge Set. See "More Views" for the handing diagram. Manufacturer part # 7123. Mounting screws are included.
9A7SS1 -
Partition Surface Mounted S.S. Hinge Set- Rh In, Lh Outswing
The Partition Surface Mounted SS Hinge Set are for use on Right Hand Inswing and Left Hand Out Swinging Doors. One of the better reasons to use this hinge is the fact that they have a stainless steel pin. Nearly all of the Gravity Hinges out there use plastic pins. Stainless Steel construction, 1/8" thick. Outside dimensions of the hinge are 3-5/16" wide by 2-7/8" high. The screw spacing is 2-5/16" wide by 1-1/2" high. The mounting holes are 1/4" diameter. For use on a left hand outswing door, or right hand inswing door. See "More Views" for the handing diagram. Also known as a Bathroom Stall Gravity Hinge Set, or Toilet Partition Surface Mounted Hinge Set. Manufacture part # 7093. Shipped with mounting screws.
9A7093 -
Partition Surface Mounted Hinge Set Lh Out, Rh Inswing
The Partition Surface Mounted Hinge Set is for use on Left Hand Out Swing and Right Hand Hand In Swinging doors. The hinges raise the door up 1/4" when opening, and then gravity causes the door to shelf close. They measure 1-1/2" center to center hole spacing on the vertical and 2-7/16" center to center on the horizontal. Constructed of cast brass with chrome plating and polished. They are also known as a Bathroom Stall Gravity Hinge Set. Manufacture part # 7011.
9A70B2 -
Surface Mounted Stainless Hinge sets LHIN/RHOUT
Surface Mounted Stainless Hinge sets in stock for quick deliveries, this version is a left hand inswing and right hand outswing hinge set, always facing the toilet compartments. The overall wide is 3-1/4" x 3-5/32"ht, the hole spacing is 2-5/16" and 1-1/2"ht with 1/4" holes. This is a gravity type hinge that uses a stainless adjustable pintle to close the door. This part is also known for 7283. All hardware included to install. Maximum door weight is 80lbs.
9A7283 -
Surface Mount Door Hinge Set LH In/ RH Out
The Surface Mount Door Hinge Set LH In/ RH Out is for use on Right Hand Out Swing and Left Hand In Swinging doors. They are self closing. The hinges are constructed on stamped stainless steel that is then polished. The package includes the top and bottom hinges and the mounting screws. Hole spacing right to left 2-1/4", up and down 1-1/2", overall 3" width by 2-1/2" height. Also known as a toilet partition or bathroom stall gravity surface hinge set. Manufacture part number is 7083.
9A7083 -
Surface Mount Door Hinge Set RH In/ LH Out
The Surface Mount Door Hinge Set RH In/ LH Out is for use on Right Hand In Swing and Left Hand Out Swinging doors. They are self closing. The hinges are constructed on stamped stainless steel that is then polished. The package includes the top and bottom hinges and the mounting screws. Hole spacing right to left 2-1/4", up and down 1-1/2", overall 3" width by 2-1/2"height. Also known as a toilet partition or bathroom stall gravity surface hinge set. Manufacture part number is 7073.
9A7070 -
Surface Mounted S.S. Square Barrel Hinge Set- Lh Out, Rh Inswing
The Surface Mounted. Square Barrel Hinge Set- Left Hand Out Swing and Right Hand In swing are our most heavy duty hinges. They are constructed of 1/8" thick stainless steel. 1-1/2" hole spacing up and down and 2-3/8" right to left hole spacing. Outside dimensions are 3-1/8" wide x 3" high. Also known as Bathroom Stall Gravity Hinge Sets. Manufacture part # 7052. Includes all screws.
9A7052 -
Alcove Clip Set Chrome Plated 2 Pieces
Toilet Partition Alcove Clip Set, 2 Pieces, For 1" To 1-1/4" Panel Chrome Plated
These clips are 1-1/2" tall x 2-1/4" wide. The screws are 1-1/2" on center, with 1/4" diameter holes. The clip is constructed of polished chrome plated zamac die cast materail. This part is also know as Bathroom Stall Alcove Clip Set, or Toilet Partition Alcove Clip. The manufacturers part number is 8340, 560157, and 650-6656. These clips are sold in sets with the fasteners. They are used to connect a 1" panel to a 1-1/4" panel.
9A8340 -
Stainless Steel Plated Alcove Clip Set, 2 Pieces, For 1" To 1-1/4"
Toilet Partition Alcove Clip Set, 2 Pieces, For 1" To 1-1/4" Panel Stainless Steel Plated
These clips are 1-1/2" tall x 2-1/4" wide. The screws are 1-1/2" on center, with 1/4" diameter holes. The clip is constructed of cast stainless steel material. This part is also know as Bathroom Stall Alcove Clip Set, or Toilet Partition Alcove Clip. The manufacturers part number is 8343. These clips are sold in sets with the fasteners. They are used to connect a 1" panel to a 1-1/4" panel.
9A8343 -
Partition Surface Mounted Hinge Set Rh Out, Lh Inswing
The Partition Surface Mounted Hinge Set is for use on Right Out Swing and Left Hand In Swinging doors. The hinges raise the door up 1/4" when opening, and then gravity causes the door to shelf close. They measure 1-1/2" center to center hole spacing on the vertical and 2-7/16" center to center on the horizontal. Constructed of cast brass with chrome plating and polished. They are also known as a Bathroom Stall Gravity Hinge Set. Manufacture part # 7021.
9A70B1 -
Surface Mounted Stainless Hinge sets RHIN/LHOUT
Surface Mounted Stainless Hinge sets in stock for quick deliveries, this version is a right hand inswing and left hand outswing hinge set, always facing the toilet compartments. The overall wide is 3-1/4" x 3-5/32"ht, the hole spacing is 2-5/16" and 1-1/2"ht with 1/4" holes. This is a gravity type hinge that uses a stainless adjustable pintle to close the door. This part is also known for 7273. All hardware included to install. Maximum door weight is 80lbs.
9A7273 -
Partition Surface Mounted SS Hinge Set - Lh In, Rh Outswing
The Partition Surface Mounted SS Hinge Set are for use on Left Hand Inswing and Right Out Swinging Doors. One of the better reasons to use this hinge is the fact that they have a stainless steel pin in them. Nearly all of the Gravity Hinges out there use plastic pins. Stainless Steel construction, 1/8" thick. Outside dimensions of the hinge are 3-5/16" wide by 2-7/8" high. The screw spacing is 2-5/16" wide by 1-1/2" high. The mounting holes are 1/4" diameter. For use on a left hand inswing door, or right hand outswing door. See "More Views" for the handing diagram. Also known as a Bathroom Stall Gravity Hinge Set, or Toilet Partition Surface Mounted Hinge Set. Manufacture part # 7103. Shipped with mounting screws.
9A7103 -
Retractable White Poly Shower Seat lh
This L-shaped reversible shower seat is ADA compliant and comes with a one-piece, one-half inch thick ivory phenolic top. The reversible L-shaped component allows the handing of the seat to be determined in the field. The seat is 32 inches by 23 inches and includes a self-locking mechanism to secure the seat in the upright position when it is not in use. The tubular components are fabricated from stainless steel.
9E803P -
ASI Roval Recessed Hand Dryer
Roval Recessed Hand Dryer, 20199
This high performing hand dryer, with a drying time of less than 15 seconds, has a cover made of 18 gauge stainless steel and uniquely complements the Roval™ Collection with its bowed face and gently radiused edges. 5-year warranty.
FEATURES:
- Quick drying — less than 15 seconds
- Operates automatically using infrared sensor
- Auto-resetting thermostat
20199 -
ASI Roval Dual Sanitary Napkin & Tampon Dispenser
Roval Dual Sanitary Napkin & Tampon Dispenser Dispenses 31 napkins and 22 tampons. Door made of 18 gauge type 304 satin finish stainless steel, with two flush tumbler locks. Universal coin mechanism is convertible for 25 cents, 50 cents or FREE (no coin) operation. Coin boxes have different lock and key than doors. Wall Opening: 15 5/8" W x 25 7/8" H x 4" D
204684 -
Surface Mounted S.S. Square Barrel Hinge Set- Rh Out, Lh Inswing
The Surface Mounted. Square Barrel Hinge Set- Right Hand Out Swing and Left Hand In swing are our most heavy duty hinges. They are constructed of 1/8" thick stainless steel. 1-1/2" hole spacing up and down and 2-3/8" right to left hole spacing. Outside dimensions are 3-1/8" wide x 3" high. Also known as Bathroom Stall Gravity Hinge Sets. Manufacture part # 7051. Includes all screws.
9A7051 -
Retractable White Cushion Shower Seat lh
Retractable White Cushion Shower Seat lh, Left hand seat with cushion covered in off-white Naugahyde. Frame, support legs, flanges, and bracket are type 304 satin finish stainless steel. Seat measures 33″ wide and projects 22-7⁄8″ from wall. Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly.
9E728L -
Retractable Naugahyde Cushion Shower Seat rh
Retractable White Cushion Shower Seat lh, Right hand seat with cushion covered in off-white Naugahyde. Frame, support legs, flanges, and bracket are type 304 satin finish stainless steel. Seat measures 33″ wide and projects 22-7⁄8″ from wall. Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly.
9E728R -
Retractable Ivory Phenolic Shower Seat lh
Retractable Ivory Phenolic Shower Seat lh, (Left Hand) Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly. Seat is ½” thick, one piece solid, white colored, black core phenolic. Frame, support legs, flanges, and bracket are type 304 satin finish stainless steel. Phenolic seat ONLY is field reversible. Seat measures 33″ wide and projects 22-7⁄8″ from wall. When properly mounted seat will support up to 250 lbs.
9E803PH -
Heavy Duty Vault Hinge Set Stainless Steel, For 3/4" Or 1"
The Heavy Duty Vault Hinge Set Stainless Steel, for 3/4" Or 1" thick doors is used by all of the manufactures on their Solid Plastic (HDPE) Restroom dividers. The hinges are designed for 3/4" to 1" thick doors and 3/4" to 1" thick pilaster posts. They use this style hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a Bathroom Stall Roller Bearing Hinge Set. Manufacture part # 7813. Shipped with mounting screws.
9A7813 -
Retractable White Poly Shower Seat
This rectangular folding shower seat is 18 inches by 16 inches and the one-piece white poly top is 1/2 inch thick. Tubular components are fabricated from stainless steel. All 34 are ADA compliant, and include a self locking mechanism to secure the seat upright when not in use.
9E703P -
Retractable White Poly Shower Seat rh
This L-shaped reversible shower seat is ADA compliant and comes with a one-piece, one-half inch thick ivory phenolic top. The reversible L-shaped component allows the handing of the seat to be determined in the field. The seat is 32 inches by 23 inches and includes a self-locking mechanism to secure the seat in the upright position when it is not in use. The tubular components are fabricated from stainless steel.9E804P -
Retractable Ivory Phenolic Shower Seat rh
Retractable Ivory Phenolic Shower Seat rh, 32" X 23". (Right Hand) Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly. Seat is ½” thick, one piece solid, white colored, black core phenolic. Frame, support legs, flanges, and bracket are type 304 satin finish stainless steel. Phenolic seat ONLY is field reversible. Seat measures 33″ wide and projects 22-7⁄8″ from wall. When properly mounted seat will support up to 250 lbs.
9E804PH -
Retractable Wood Grain Shower Seat rh
Retractable Wood Grain Phenolic Seat rh,This L-shaped reversible shower seat is ADA compliant and comes with a one-piece, one-half inch thick wood-grain phenolic top. The reversible L-shaped component allows the handing of the seat to be determined in the field. The seat is 32 inches by 23 inches and includes a self-locking mechanism to secure the seat in the upright position when it is not in use. The tubular components are fabricated from stainless steel.
9E804T -
Dual Access Napkin Disposal
Dual Access Napkin Disposal
Body: Type 304 #22 ga stainless steel, #4 satin finish.
Flanges: Type 304 #22 ga stainless steel, drawn one-piece construction with 1/4" returns to wall surface. One flange is welded to body the other is adjustable to fit 3/4" - 1 1/4" thick partitions. (No miters or welds)
Push Panels: Type 304 #22 ga stainless steel self closing push panel door. *International graphic symbol optional*
Waste: Type 304 #22 ga stainless steel removable from one side with pin tumbler type lock securing in place.
*Optional finger grip in lieu of lock* Also known as 0472.
9A0472 -
Shower Room Benches
- Shower Room Benches require 2 pedestal's not included.
- Locker benches shall be laminated selected hardwood 1-1/4" full finished thickness.
- All corners are to be rounded and sanded.
- Surfaces shall be finished with two coats of clear lacquer.
- Available Bench Tops are to be 9-1/2" wide and furnished in lengths of 3' through 12' (even foot increments).
9E58XX -
Universal Stainless Steel Handing Hinge
Universal Stainless Steel Handing Hinge Surface mounted. This hinge is universal which means this can be in or out swing and right or left hinged. This hinge is 1/8" thick, overall width is 3" x 3-3/8" ht. The hole spacing is 2" x 1-1/2" up and down. The manufacturer's part number is 650-8241, 7199. Hardware included for 1" door and 1-1/4" thick post.
9A8241 -
Automatic Hands Free Gel Hand Sanitizer Dispenser with Floor Stand
- Works with most Liquid/Gel Hand Sanitizers or Liquid Soaps
- Ideal for use in offices, schools, warehouses, food service facilities, manufacturing, hospitals and much more
- Stand elevates to the perfect height for sanitizing hands on-the-go
- ADA compliant in force and one-handed operation
- Accessible to people with disabilities
- Made with durable ABS plastic
- Top dispensing technology reduces risk of leaking valves
- Automatic, hands free operation for improved hand hygiene
- Four C batteries (not included) for longer life
- 1200mL capacity dispenser Bulk Fill
- Site window to easily monitor the soap level
- Equipped with lock and key
430LS -
White Fabric Shower Curtain 36" x 72"
Shower Curtain - 10 Ga. White Vinyl, Order 8 Hooks Separately - 36"W X 72"H
Flame-resistant, anti-bacterial, 10 gauge white vinyl fabric with standard height of 72". Curtain should be 6" wider than opening up to 54" and 12" wider than opening exceeding 54".
Shower curtain should be attached with hooks (not provided, order separately) to rod (not provided, order separately). Known as 10-1200-V48 by American Specialties.
36X72P -
Curtain Rod Kit, 1" x36"
Tubing is 1″ diameter x 20 gauge with a satin finish. 36" Length will be as specified. Rod is held captive by flanges when installed properly. Rod may rotate in flanges if turned by hand. Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others. Rod will bend and pull from flanges if significant body weight is suspended.
CURTAIN1x36 -
Curtain Rod Kit, 1" x60"
Tubing is 1″ diameter x 20 gauge with a satin finish. 60" Length will be as specified. Rod is held captive by flanges when installed properly. Rod may rotate in flanges if turned by hand. Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others. Rod will bend and pull from flanges if significant body weight is suspended.
CURTAIN1x60 -
Partition Continuous Hinge 57" 1/4" Pin
Toilet Partition Continuous Hinge, 57" Long Non Handed,14 Gauge Stainless Steel ,1/4" Diameter Pin, Cam Close. The hinges must be mounted flat when door is shut. For inside swing the hinges are mounted on the inside of the stall. For the outside they must be mounted on the outside.
This is the most Heavy Duty Continuous Full Length Hinge we sell. 14 gauge (.075" thick) stainless steel construction with a 1/4" diameter hinge pin. The hinge leafs are angle cut so your door will close with the camming action. The hinge is 3" wide when laid flat, and 57" long. Screws are spaced 11" apart and the holes are 9/32" diameter and has 6 sets of holes. Hinge can be raised up 3/8" for emergency entry. Also known as a Bathroom Toilet Stall Full Length Continuous Hinge. Manufacturer part #7789, 160029, 650-9400.
9A7789 -
Automatic Hands Free Foaming Hand Sanitizer Dispenser with Drip Tray & Stand
- Works with most Foam Hand Sanitizers or Foam Soaps
- Ideal for use in offices, schools, warehouses, food service facilities, manufacturing, hospitals and much more
- Stand elevates to the perfect height for sanitizing hands on-the-go
- ADA compliant in force and one-handed operation
- Accessible to people with disabilities
- Made with durable ABS plastic
- Top dispensing technology reduces risk of leaking valves
- Automatic, hands free operation for improved hand hygiene
- Four C batteries (not included) for longer life
- 1200mL capacity dispenser Bulk Fill
- Site window to easily monitor the soap level
- Equipped with lock and key
430FS -
Shower Room Pedestals Only Putty Color (Tan)
Shower Room Pedestal 8" x 16-1/4"ht Sold Individually. Heavy duty Bench Pedestals shall consist of steel tubing with 10 gauge steel flanges welded to each end. The overall height of pedestal shall be 16-1/4". Pedestals are to be finished to match the lockers in Putty color.
9E5818





































