Search results for: 'surface mounted toilet doan hini'
-
Hiny Hider 8" Ada Hinge Set
The Hiny Hider 8" ADA Hinge Set includes 3 hinges, one for the top, bottom and intermediate locations. They constructed of clear anodized aluminum and are usually for 1" thick panels and 1" thick doors. This hinge set meets ADA Compliance. Used by every Bathroom Toilet Stall manufacture on Solid Plastic Toilet Partitions Doors. Manufacturer part #'s 7978, 7988, 8974, and 8984. These hinges are reversible by taking the 3 pieces apart and reconfiguring the opposite swing.
9HHGBADA -
Hiny Hider Aluminum Slide Bolt Latch 3-1/2" Screws
The Hiny Hider Aluminum Slide Bolt Latch 3-1/2" Screws is usually used on Solid Plastic (HDPE) Toilet Partitions. Base is 4-1/2" tall by 2" wide by 1/8" thick. Latch bolt is 3-1/8" long by 1" wide by 1/4" thick, and has a 1" throw. The latch bolt is 9/16" from the bottom of the base to the under side of the latch bolt. Also known as a Bathroom Stall Aluminum Slide Bolt Latch and Toilet Partition Locks. Clear anodized aluminum construction. The manufacture part #'s are 4988, 650-4051, 650-8543 and HLSLA. This latch ships with the mounting screws.
9HLSLA -
Toilet Partition Surface Mounted SS Hinge Set -Rh Out, Lh Inswing
The Toilet Partition Surface Mounted SS Hinge Set are for use on Right Hand Out Swing and Left Hand Inswinging Doors. They feature 1/8" thick stainless steel construction. Outside hinge measurements are 3-1/4" wide by 2-29/32" high. 1-1/2" hole spacing up and down, and 2-3/8" right to left hole spacing. The four mounting holes are 1/4" diameter. This hinge set includes the top and bottom hinges. Also known as Bathroom Stall Gravity Hinge Set. See "More Views" for the handing diagram. Manufacturer part # 7123. Mounting screws are included.
9A7SS1 -
Hiny Hider Outswing Flat Stop 6"
The Hiny Hider Outswing Flat Stop 6" has Clear Anodized aluminum construction. The strike and keeper is 6" tall by 1-5/8" deep by 1/8" thick. The stop is 9/16" deep by 3/4" wide with a rubber insert. The mounting holes are 3" on center. Also known as a Bathroom Stall Flat Backed for Wall Mounting Strike and Keeper. Manufacture part #5898. Shipped with mounting screws.
9A5898 -
Bobrick Surface Mounted Napkin/Tampon Dispenser
Bobrick surface mounted napkin/tampon dispenser with two models to choose from. The unit is satin finish stainless steel on exposed surfaces and is 11-7/8"w x 25-7/8"ht and has adjustable flange surface mounts. Choice of Free or .25 cents for your customers. The model #'s B-2706-25 and B-2706-C are the two that we offer, see detailed sheet for more information.
B2706 -
Hiny Hider Inswing Flat Stop 6"
The Hiny Hider Inswing Flat Stop 6" has Clear anodized aluminum construction. The strike and keeper is 6" tall by 2-9/16" deep and 3/4" thick on the stop. The material is 1/8" thick. The mounting holes are 3" on center. And the locking slot is 1-1/2" high by 3/8" deep. Also known as a Bathroom Stall Strike and Keeper-Inswing Flat. Manufacture part # 5798. Shipped with mounting screws.
9A5798 -
Toilet Partition Surface Mounted S.S. Hinge Set- Rh In, Lh Outswing
The Toilet Partition Surface Mounted S.S. Hinge Set is for use on Right In Swing and Left Out Swinging Doors. The hinge is constructed of 3/32" thick stainless steel. They measure 3-1/4" wide x 2-29/32" high outside dimensions. 1-1/2" hole spacing up and down, and 2-7/16" right to left hole spacing. Also known as a Bathroom Stall Surface Mounted Hinge Set. Manufactures part # 7033. Shipped with the fasteners.
9A7033 -
Toilet Partition Surface Mounted SS Hinge Set- Lh In, Rh Outswing
The Toilet Partition Surface Mounted S.S. Hinge Set is for use on Left In Swing and Right Out Swinging Doors. The hinge is constructed of 3/32" thick stainless steel. They measure 3-1/4" wide x 2-29/32" high outside dimensions. 1-1/2" hole spacing up and down, and 2-7/16" right to left hole spacing. Also known as a Bathroom Stall Surface Mounted Hinge Set. Manufactures part # 7043. Shipped with the fasteners.
9A7043 -
Hiny Hider Aluminum 6" Outswing Keeper Bumper For 1"
The Hiny Hider Aluminum 6" Outswing Keeper Bumper For 1" pilaster post has Clear Anodized aluminum construction. Strike and Keeper is 6" high by 1-15/16" wide. The three mounting screws are 2" on center apart. Also known as a Bathroom Stall Strike and Keeper outswing 1". Used mostly on Solid Plastic (HDPE) Toilet Partitions. Shipped with mounting screws.
9HSOSA -
Partition Surface Mounted S.S. Hinge Set- Rh In, Lh Outswing
The Partition Surface Mounted SS Hinge Set are for use on Right Hand Inswing and Left Hand Out Swinging Doors. One of the better reasons to use this hinge is the fact that they have a stainless steel pin. Nearly all of the Gravity Hinges out there use plastic pins. Stainless Steel construction, 1/8" thick. Outside dimensions of the hinge are 3-5/16" wide by 2-7/8" high. The screw spacing is 2-5/16" wide by 1-1/2" high. The mounting holes are 1/4" diameter. For use on a left hand outswing door, or right hand inswing door. See "More Views" for the handing diagram. Also known as a Bathroom Stall Gravity Hinge Set, or Toilet Partition Surface Mounted Hinge Set. Manufacture part # 7093. Shipped with mounting screws.
9A7093 -
Surface Mounted Stainless Hinge sets LHIN/RHOUT
Surface Mounted Stainless Hinge sets in stock for quick deliveries, this version is a left hand inswing and right hand outswing hinge set, always facing the toilet compartments. The overall wide is 3-1/4" x 3-5/32"ht, the hole spacing is 2-5/16" and 1-1/2"ht with 1/4" holes. This is a gravity type hinge that uses a stainless adjustable pintle to close the door. This part is also known for 7283. All hardware included to install. Maximum door weight is 80lbs.
9A7283 -
Bobrick Surface Mounted Impact Resistant Soap Dispenser
B-5050 Bobrick Surface Mounted Impact Resistant Soap Dispenser. Valve dispenses all purpose soaps. No lock with easy refills. Plastic polymer grey in color. The capacity is 50 fl oz and can mount to a mirror if needed. The unit is 6"w x 8-1/8"h x 4" depth to push button.
B5050 -
ASI Roval Surface Mounted Vertical Soap Dispenser
Roval Surface Mounted Vertical Soap Dispenser, 20363 Same as 20364 but with push button. Valve operation complies with ADAAG, needing no more than 5 lbs of pressure to actuate. Gently radiused edge complements the curves of the ASI Roval Collection. Bulk fill with a 57 oz capacity. Overall Size 5 1/2” x 10 7/8” x 4” projection.
20363 -
Hiny Hider Aluminum 6" Inswing Strike And Keeper For 1" Post
The Hiny Hider Aluminum 6" Inswing Strike And Keeper For 1" Post has Clear Anodized aluminum construction. Strike and Keeper is 6" high by 1-15/16" wide. The three mounting screws are 2" on center apart. The slot is 3/8" deep by 1-1/2" high. Also known as a Bathroom Stall Strike and Keeper Inswing 1". Used mostly on Solid Plastic (HDPE) Toilet Partitions. Some manufacture part #'s are 5778, HSISA, and 650-2873. Shipped with mounting screws.
9HSISA -
Hiny Hider 8" Wrap Around Hinge Set
The Hiny Hider 8" Wrap Around Hinge Set is constructed of clear anodized aluminum and are used on 1" thick door and panels. Used by every Bathroom Toilet Stall manufacture on Solid Plastic Toilet Partitions Doors. Sometimes known as part numbers, 7978, 7988, 8974, and 8984. These hinges are reversible by taking the 3 pieces apart and reconfiguring the opposite swing.
9HHGB -
Toilet Partition Surface Mounted SS Hinge Set Lh Out, Rh Inswing
The Toilet Partition Surface Mounted SS Hinge Set are for use on Left Hand Out Swing and Right Hand In Swinging Doors. They feature 1/8" thick stainless steel construction. Outside hinge measurements are 3-1/4" wide by 2-29/32" high. 1-1/2" hole spacing up and down, and 2-3/8" right to left hole spacing. The four mounting holes are 1/4" diameter. This hinge set includes the top and bottom hinges. Also known as Bathroom Stall Gravity Hinge Set. See "More Views" for the handing diagram. Manufacturer part # 7113. Mounting screws are included.
9A7SS2 -
Surface Mount Door Hinge Set LH In/ RH Out
The Surface Mount Door Hinge Set LH In/ RH Out is for use on Right Hand Out Swing and Left Hand In Swinging doors. They are self closing. The hinges are constructed on stamped stainless steel that is then polished. The package includes the top and bottom hinges and the mounting screws. Hole spacing right to left 2-1/4", up and down 1-1/2", overall 3" width by 2-1/2" height. Also known as a toilet partition or bathroom stall gravity surface hinge set. Manufacture part number is 7083.
9A7083 -
B-262 Surface-Mounted Paper Towel Dispenser
Bobrick B262 surface mounted paper towel dispenser on sale today. Satin finish stainless steel. Paper dispenser holds 400 c fold or 525 multifold towels. The door has a tumbler lock with key and piano hinge for extra strength. Hemmed towel tray opening. The unit is 10-3/4" x 14"ht x 4" depth.
B262 -
Surface Mounted Stainless Hinge sets RHIN/LHOUT
Surface Mounted Stainless Hinge sets in stock for quick deliveries, this version is a right hand inswing and left hand outswing hinge set, always facing the toilet compartments. The overall wide is 3-1/4" x 3-5/32"ht, the hole spacing is 2-5/16" and 1-1/2"ht with 1/4" holes. This is a gravity type hinge that uses a stainless adjustable pintle to close the door. This part is also known for 7273. All hardware included to install. Maximum door weight is 80lbs.
9A7273 -
Global Partitions Bottom Hinge for Surface Mount
Global Partitions Bottom Hinge For Surface Mount. Chrome plated Zamac die cast construction. Used with powder coated steel and stainless steel partition doors. Pivot hinge is 2-3/16" tall by 1-1/2" wide. The hole spacing is 1-1/2" on center. The lug projects out 1-9/16" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Manufacture part # 3010, 111710. Also used with Flush Metal and General Partitions. Shipped with mounting screws. A=1-9/16". Also used with Accurate Partition doors after January 2013.
9G0201 -
B-4262 Surface Mounted Towel Dispenser with TowelMate
B-4262 Surface Mounted Towel Dispenser with TowelMate on sale today. Satin finish stainless steel. Paper dispenser holds 400 c fold or 525 multifold towels. Complete with tumble lock on top of cabinet and includes key, cabinet slots indicate refill time. The unit is 10-13/16" x 13-1/4"ht x 4-7/8" depth.
B4262 -
Partition Surface Mounted SS Hinge Set - Lh In, Rh Outswing
The Partition Surface Mounted SS Hinge Set are for use on Left Hand Inswing and Right Out Swinging Doors. One of the better reasons to use this hinge is the fact that they have a stainless steel pin in them. Nearly all of the Gravity Hinges out there use plastic pins. Stainless Steel construction, 1/8" thick. Outside dimensions of the hinge are 3-5/16" wide by 2-7/8" high. The screw spacing is 2-5/16" wide by 1-1/2" high. The mounting holes are 1/4" diameter. For use on a left hand inswing door, or right hand outswing door. See "More Views" for the handing diagram. Also known as a Bathroom Stall Gravity Hinge Set, or Toilet Partition Surface Mounted Hinge Set. Manufacture part # 7103. Shipped with mounting screws.
9A7103 -
Global Partitions Top Hinge for Surface Mount
Global Partitions Top Hinge For Flat Surface Mounting. Chrome plated Zamac die cast construction. Used with powder coated steel and stainless steel partition doors. Pivot hinge is 2-3/16" tall by 1-1/2" wide. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 3/8" diameter. Manufacturer part # 135580. Same part for Flush Metal and General Partitions. Shipped with mounting screws. A=1-7/6". Also used with Accurate Partition doors after January 2013.
9G0202 -
Partition Surface Mounted Hinge Set Lh Out, Rh Inswing
The Partition Surface Mounted Hinge Set is for use on Left Hand Out Swing and Right Hand Hand In Swinging doors. The hinges raise the door up 1/4" when opening, and then gravity causes the door to shelf close. They measure 1-1/2" center to center hole spacing on the vertical and 2-7/16" center to center on the horizontal. Constructed of cast brass with chrome plating and polished. They are also known as a Bathroom Stall Gravity Hinge Set. Manufacture part # 7011.
9A70B2 -
Bobrick Surface Mounted Waste Receptacle with Disposal Door
Bobrick B-35639 surface mounted waste receptacle with disposal door in a satin finish stainless steel all welded construction. The door is secured to cabinet with a concealed full length stainless piano hinge. Equipped with a cable door swing limit and tumbler lock. Waste bin constructed of heavy gauge stainless steel. The unit is a 3 gallon capacity and is 14-13/16"w x 28-3/16"h x 4-1/2" depth.
B35639





































