Search results for: 'black toilet hand stall duti'
-
Multi Fold Towel/Waste Receptacle Recess Stainless Steel
C-Fold, Multi Fold Towel Dispenser and Waste Receptacle
22 gauge Type 304 Stainless Steel
Heavy duty door and piano hinge
Tumble lock on doors and waste receptacle
600 C-fold or 800 Multi-fold towel capacity
12 gallon waste receptacle
h15"w x 54" x 4"d hole opening
17-1/4"x56"ht x 4" overall dimension.
9A0469 -
ASI Roval Paper Towel Dispenser & Removable Waste Receptacle
Roval Paper Towel Dispenser & Removable Waste Receptacle. Dispenses 600 C-fold or 800 multi-fold paper towels. 14.8 gal. (56 L) removable waste receptacle. Door made of 18 gauge type 304 stainless steel with a heavy-duty 3/16" staked piano hinge. Wall Opening: 15 3/4" W x 54 1/2" H x 4" D
20469 -
Partition Door Piano Hinge W/Cover lh in/rh out 54" aluminum anodized
Partition Door Piano Hinge W/Cover lh in/rh out 54" aluminum anodized is a heavy duty 1/4" pin with spring to close. this hinge has 5 holes on each side with 13" centers and starts at 1" from top and bottom. The cover makes the hinge holes not as noticeable. Also known as 8684.
9A8684 -
Ampco Toilet Partition Coat Hook Bumper
The Ampco Toilet Partition Coat Hook Bumper is constructed of Zamac die cast metal and then chrome plated. Coat hook bumper projects out 3" and has a rubber insert. The hook projects out 1-7/32". The coat hook bumper base is 1-7/16" wide by 2-1/4" high with a hole spacing of 7/8". Also known as a Bathroom Stall Hook. Manufacture part # 4000.
96200B -
Fiat Toilet Partition Coat Hook Bumper
The Fiat Toilet Partition Coat Hook Bumper is constructed of Zamac die cast metal that is then chrome plated and polished. Coat hook bumper projects out 3" and has a rubber insert. The hook projects out 1-7/32". The coat hook bumper base is 1-7/16" wide by 2-1/4" high with a hole spacing of 7/8". Also known as a Bathroom Stall Hook. Manufacture part # 4000.
9F0225 -
Toilet Partition Keeper- Inswing For 3/4" Square Edge
The Toilet Partition Keeper- Inswing For 3/4" Square Edge is for in swinging doors with a 3/4" squared edged pilaster post. It is constructed of cast stainless steel. We find this keeper used on Global Partition Corp and Accurate Partition Corp restroom stalls. The manufacture part # on this is 40-8562305
9HAP59 -
Knickerbocker Toilet Partition Top Hinge
The Knickerbocker Toilet Partition Top Hinge is constructed of Zamac die cast metal that is chrome plated and polished. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" and is 1/2" thick with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 3910. A=1-11/16".
9K0240 -
Ampco Toilet Partition Pintle
The Ampco Toilet Partition Pintle is constructed of steel and white nylon plastic. The Pintle is 5/8" diameter by 2-1/4" overall length with 5/16-18 threaded end. Also known as a Bathroom Stall Bottom Pintle 5/8" Medium Lift. Manufacture part # 98175. Shipped with nut and lock washer.
9C3006. -
Metpar Toilet Partition Top Hinge Pin For Laminate
The Metpar Toilet Partition Top Hinge Pin For Laminate is used on there Plastic Laminate restroom stalls. The pin features knurled steel construction, and is 3-1/2" long by 3/8" diameter. The knurled end has a threaded hole of a 10-24 screw. Also known as a Bathroom Stall Hinge Pin. Manufacture part # 99109.
9CP450 -
Mills Toilet Partitions Keeper Bumper Concealed
The Mills Toilet Partitions Keeper Bumper Concealed is for use on 1-1/4" thick round edged pilaster posts. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. They are constructed of Zamac die cast metal that is then chrome plated and polished. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5590. Shipped with mounting screws.
90T317 -
Napkin / Tampon Dispenser : Recess
Napkin / Tampon Dispenser Recess
Fabricated of Type 304 #18 Gauge Stainless Steel With #4 Satin Finish
Holds 30 Sanitary Napkin and 27 Tampon Packages
Multiple Coinage Options AvailableDoor
: Fabricated of type 304 #18 ga stainless steel with #4 satin finish. Door has 1/2" returns for rigidity.Body: Fabricated of type 304 #22 ga stainless steel with a #4 satin finish. Adj. Slip Flange: Fabricated of type 304 #22 ga stainless steel, one piece construction with no miters or welds and #4 satin finish. Flange will adjust from a 1" minimum to a 6" maximum wall depth.
Coin Mechanisms: Two independent, trouble free turn knob mechanisms, with an "EMPTY" indicator that does not allow coins to be inserted into mechanism when product has been depleted. Operational with one hand with less than 5 lbs (22.2n) of force without tight grasping. Can be operated with palm, elbow or forearm if user has a physical impairment. (Free,.25,.50)
9AU526 -
Fiat Toilet Partition Pintle
The Fiat Toilet Partition Pintle is for use on there steel doors and is constructed of steel and white nylon plastic. The Pintle is 5/8" diameter by 2-1/4" overall length with 5/16-18 threaded end. Also known as a Bathroom Stall Bottom Pintle 5/8" Medium Lift. Manufacture part # 98175. Shipped with nut and lock washer.
9F0311 -
Global Toilet Partitions Pintle
The Global Toilet Partitions Pintle is for use on there steel doors and is constructed of steel and white nylon plastic. The Pintle is 5/8" diameter by 2-1/4" overall length with 5/16-18 threaded end. Also known as a Bathroom Stall Bottom Pintle 5/8" Medium Lift. Manufacture part # 98175. Shipped with nut and lock washer.
9G0237 -
Global Toilet Partitions Top Hinge Casting
The Global Toilet Partitions Top Hinge Casting is for use on there metal restroom stalls. It is constructed of Zamac die cast metal. The outside dimensions of the top hinge casting are 5-1/8" high by 2-5/8" deep by 25/32" wide. Two of the three holes are 3/8" diameter, and the other hole is threaded for a 5/16-18 screw. Also known as a Bathroom Stall Door Insert - Top 1". Manufacture part # 4556.
9G0220 -
Sanymetal Toilet Partition Keeper 2" Between Screws
The Sanymetal Toilet Partition Keeper 2" Between Screws is constructed of Zamac die cast metal that is then chrome plated and polished. Keeper base is 3" high by 1-1/16" wide with a 2" hole spacing. Strike is 3" tall by 7/8" deep. The material 1/8" thick. The slot is 1-1/8" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5130. Shipped with mounting screws.
9S2401 -
Retractable White Poly Shower Seat lh
This L-shaped reversible shower seat is ADA compliant and comes with a one-piece, one-half inch thick ivory phenolic top. The reversible L-shaped component allows the handing of the seat to be determined in the field. The seat is 32 inches by 23 inches and includes a self-locking mechanism to secure the seat in the upright position when it is not in use. The tubular components are fabricated from stainless steel.
9E803P -
Ampco Toilet Partition Nylon Cam
The Ampco Toilet Partition Nylon Cam is constructed of white nylon. The partition cam head outside diameter is 23/32" and the inside diameter is 1/2". The cams cylinder is 1-13/32" long with a diameter of 5/8". For use with a 1/2" pintle. Also known as a Bathroom Stall Cam. Manufacture part # 98275.
9CP375. -
Metpar Toilet Partition Nylon Cam
The Metpar Toilet Partition Nylon Cam is constructed of white nylon. The partition cam head outside diameter is 23/32" and the inside diameter is 1/2". The cams cylinder is 1-13/32" long with a diameter of 5/8". For use with a 1/2" pintle. Also known as a Bathroom Stall Cam. Manufacture part # 98275.
9CP375 -
Bobrick Phenolic Partitions Ada Alcove
Bobrick SCRC solid phenolic alcove partitions 1080/1090 series with overhead braced floor mounted stalls. Alcove stall includes 36" door, 2 pilasters and panel divider to make up the balance. Doors can be either in or out swing you choose. Standard stainless steel hardware included. 3-4 week delivery from the factory.
PHALCOVEB -
Shower Room Pedestal Only Grey Color-
Shower Room Pedestal Dove Gray Color 8" x 16-1/4" Sold Individually. Heavy duty Bench Pedestals shall consist of steel tubing with 10 gauge steel flanges welded to each end. The overall height of pedestal shall be 16-1/4". Pedestals are to be finished to match the lockers in Dove Gray color.
9E5818G -
Bobrick Toilet Partition Nylon Cam
The Bobrick Toilet Partition Nylon Cam is constructed of natural nylon plastic. The nylon cam head diameter is 7/8" with an inside diameter of 11/16". The cylinder diameter is 3/4" and has an overall length of 1-11/32". For use with a 5/8" diameter pintle. Also known as a Bathroom Stall Door Hinge Cam. Manufacture part # 98245.
9AM220. -
Bobrick Toilet Partition Top Hinge Pin
The Bobrick Toilet Partition Top Hinge Pin is used on there Plastic Laminate restroom stalls. The pin features knurled steel construction, and is 3-1/2" long by 3/8" diameter. The knurled end has a threaded hole of a 10-24 screw. Also known as a Bathroom Stall Hinge Pin. Manufacture part # 99109.
9FL625. -
Mills Toilet Partition Slide Bolt Latch Concealed
The Mills Toilet Partition Slide Bolt Latch Concealed is a popular latch used by them. Latch cover plates are 1-3/4" wide by 1-3/8" high. The latch switch is 1-15/32" wide. The latch bolt is 3/8" diameter. The spacing between the cover and the latch 1-1-32". They are constructed of Zamac die cast metal that is then chrome plated and polished. This is a one of a kind latch. Also known as a Bathroom Stall Concealed Latch. Manufacture part # 4230, HDWT T290.
90T290 -
General Toilet Partition Latch Knob & Cover
The General Toilet Partition Latch Knob & Cover is constructed of Zamac die cast metal that is chrome plated and then polished. Outside diameter of the knob and cover are 1-5/8" with the inner ring diameter of 1-1/4". Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 1390, 6140.
92000C -
American Sanitary Toilet Partition Top Hinge
The American Sanitary Toilet Partition Top Hinge is constructed of Zamac die cast metal that is chrome plated then polished. The hinge is designed for use on an 1-1/4" thick pilaster post. The hinge measures 2-1/4" high by 1-1/4" wide. The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 3/8" diameter bushing. Also known as a American Sanitary Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3790. A=1-5/8"
9AM175 -
All American Toilet Partition Bottom Hinge
The All American Toilet Partition Bottom Hinge is for plastic laminate restroom stalls. The hinge is constructed of a die cast metal that is then chrome plated and polished. The part is for mounting on a square edged 1-1/4" thick pilaster post. The manufacture part number is 103PL.
9AA113