Search results for: 'dual hardwarre 1 door 1 1 4 post hinge'
-
Full Length Door Stop for 1" Material
Full length aluminum door stop for 1" material used with solid plastic commercial toilet partitions or posts that are 1" thick. This product will help any gap from the front view of the toilet stall door on the latch side. For an out swing door the slide bolt latch locks onto the opposite side of the bumper. For an in swing door the kit comes with a simple stainless steel keeper that is mounted on the inside of the stall on the post for the latch to lock to. This kit is used for an inswing or an outswing door. The spec sheet is attached, the overall height is 53-1/2". The product is made by Global Partitions with part numbers 40-8464400 and 40-8262370.
9A8464400 -
Global Complete Hinge Set with Rounded Edge
Global Complete Hinge Set with Rounded Edge. Used currently with these factories Global, General and Flush Metal and Accurate Partitions. Complete as shown in picture with the parts. Includes top pin, top hinge, bottom cam, pintle and bottom hinge and security screws. Used with powder coated steel and stainless steel partitions with a slight round edge. These will not work with old original Accurate Partitions prior to 2013. Used 2013 to current with Accurate Partitions.
9G663140 -
Double Door Pull 5-1/2" Stainless Steel
The Partition Double Door Pull 5-1/2" stainless steel come as two handles for mounting back to back handles on an one inch thick door. The handles have 5-7/8" center to center hole spacing, and the screws included are for a 1" thick door. This is constructed of cast brushed stainless steel. The manufacturer part number on this part is 900112. Overall width is 6-3/4"
9HH002 -
Surface Mount Door Hinge Set RH In/ LH Out
The Surface Mount Door Hinge Set RH In/ LH Out is for use on Right Hand In Swing and Left Hand Out Swinging doors. They are self closing. The hinges are constructed on stamped stainless steel that is then polished. The package includes the top and bottom hinges and the mounting screws. Hole spacing right to left 2-1/4", up and down 1-1/2", overall 3" width by 2-1/2"height. Also known as a toilet partition or bathroom stall gravity surface hinge set. Manufacture part number is 7073.
9A7070 -
Pilaster Shoe for 1-1/4" Thick x 3" ht
Toilet partition square edge pilaster shoe split, stamped stainless steel construction. Pilaster Shoe measures 2" to 24" wide by -1-1/4" thick by 3" high. This size pilaster post shoe is split on one end for easy installation. Also known as a bathroom stall pilaster post shoe square edge. Used for the base of the support system with floor mounted pilaster.
9A0306 -
Continuous Hinge Stainless Steel, 71-1/2" Rh Inswing, Lh Outswing
Continuous Hinge Stainless Steel, is 71-1/2" long by 3" wide, and is for use on Right Inswing, Left Outswing restroom stall doors. The hinge is constructed of 16 gauge (.060" thick) stainless steel and the screws are placed every 11" or so. The hinge pin is 1/8" diameter, and the mounting holes are 9/32" diameter. This hinge is also known as a Full Length Toilet Partition Continuous Hinge. The Bathroom Stall hinge can be raised up 3/8" for emergency entry. See "More Views" for handing information. Manufacture part # 7759
9A7759 -
Bobrick Toilet Partition Bottom Hinge
The Bobrick Toilet Partition Bottom Hinge is constructed of Zamac die cast metal and then chrome plated and polished. This hinge is designed for use on 1" thick square edged pilaster posts. The hinge mounting U channel measures 2-1/8" high by 1" deep with an insert depth of 1". The hole spacing is 1-1/2" on centers. The hinge lug projects out 1-9/16" by 1/2" thick with a 5/16" diameter hole. Also known as a Bobrick Bathroom Stall Pivot Hinge - Bottom 1". Manufacture part # 3260 and 650-8843. Ships with mounting screws.
9BR843 -
Global Partitions Plastic Laminate Door Kit For 1"
Global partitions door kit for plastic laminate material. The hinges and door stop are for 1" thick material only. We offer in a chrome finish or a stainless steel version. You will need to choose in or out swing and which finish you would like. These manufacturers numbers below. Used with Global and Accurate partitions.
See link for Instructions ***Plastic laminate hinge instructionsChrome inswing 8512013
Chrome outswing 8512014Stainless Steel Inswing 8262013
Stainless Steel outswing 82620149G -
Partition Door Piano Hinge W/Cover lh in/rh out 54" aluminum anodized
Partition Door Piano Hinge W/Cover lh in/rh out 54" aluminum anodized is a heavy duty 1/4" pin with spring to close. this hinge has 5 holes on each side with 13" centers and starts at 1" from top and bottom. The cover makes the hinge holes not as noticeable. Also known as 8684.
9A8684 -
Global Partitions Top Hinge
The Global Partitions Top Hinge is for use on 1-1/4" thick round edged pilaster posts. It is constructed of Zamac die cast metal that is then chrome plated and then polished. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 3/8" diameter. Also known as a Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3510. Shipped with mounting screws. A=1-7/6"
9G0225 -
Flush Metal Partition Top Hinge
The Flush Metal Partition Top Hinge is for use on 1-1/4" square edged pilaster posts. It is constructed of Zamac die cast metal that is then chrome plated and polished. The hinge measures 2-1/4" high by 1-1/4" wide. The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 3/8" diameter bushing. Also known as a Fiat Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3790. A=1-5/8"
9FL600 -
Global Toilet Partitions Bottom Hinge
The Global Toilet Partitions Bottom Hinge is for use on 1-1/4" thick round edged pilaster posts. It is constructed on Zamac die cast metal that is chrome plated and polished. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Also known as a Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3010. Shipped with mounting screws. A=1-7/6".
9G0230 -
Stainless Steel Double Door Pull for 3/4” and 1”
Stainless Steel Double Door Pull made for 3/4” and 1” thick doors. Measurements for the handle 6-5/8" width, 5-1/2" hole to hole spacing, 5" interior opening and 2" height. Constructed of stainless steel with though bolts for mounting back to back on partition doors.Commonly known as part number 189373. This double door pull kit comes with fasteners and Torx Bit(T-20) for 3/4" and 1" thck doors.
9A189373 -
Full Length Aluminum Door Stop for 1" panel outswing
Toilet partition full length aluminum door stop for 1" panel outswing doors. This product is clear anodized aluminum. This full length door stop with block the gap between the door and the post next to it. For an outswing the latch locks on the back side of the bumper. The door keeper and strike is 54" in length and has 5 holes spaced at 13" apart and starts at 1" from the top and the bottom. Also known as 134314 strike & keeper channel. Includes all hardware.
9A134314 -
General Toilet Partitions Bottom Hinge
The General Toilet Partitions Bottom Hinge is used on round edged 1-1/4" thick pilaster posts. It features chrome plated Zamac die cast construction. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" to center hole with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3420. A=1-11/16"
96319A -
Keeper Bumper For 1-1/4" Inswing Round Edge
Chrome Plated Keeper Bumper For 1-1/4" Inswing Round Edge Post
Zamac die cast and polished chrome plate construction. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. The slot measures 1-9/16" high by 5/16" deep. Commonly known as a Bathrrom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5310
Shipped with mounting screws.
9G0151 -
Fiat Toilet Partition Bottom Hinge
The Fiat Toilet Partition Bottom Hinge is constructed of Zamac die cast metal, then chrome plated. This bottom hinge is for 1-1/4" thick square edged pilaster posts. The hinge U channel measures 2-1/4" high by 1-1/4" deep with an insert depth of 1-5/16". The hole spacing is 1-1/2" on center. The hinge lug projects out 1-11/16" by 1/2" thick with a hole diameter of 5/16". Also known as a AMPCO Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3130. Shipped with mounting screws. A=1-11/16"
9F0214N. -
Global Top Pin 3/8" x 3-1/4"
The Global Toilet Partitions Top Pin is for plastic laminate restroom stalls. The top pin measures 3/8" diameter by 3-1/4" long with 5/16-18 threads. It has a screw driver flat slot on one end. Also known as a Bathroom Stall Door Top Hinge Pin. Manufacture part # 98584. It is constructed of threaded steel.
9G2252 -
Knickerbocker Toilet Partition Bottom Hinge
The Knickerbocker Toilet Partition Bottom Hinge is used on round edged 1-1/4" thick pilaster posts. It features chrome plated Zamac die cast construction. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" to center hole with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3420. A=1-11/16"
9K0230 -
Toilet Partition Keeper Bumper Chrome Plated 1-1/4" Round Edge
Chrome Plated Toilet Partition Keeper Bumper For 1-1/4" Round Edge Post
Polished chrome plated Zamac construction. The strike and keeper measure 1-1/4" high by 2-3/8" wide by 1-3/4" deep. The stop is 1/2" thick and projects out 1-1/8". The slot is 7/16" wide by 5/8" high. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5590.
Shipped with mounting screws.
9A5590 -
Fiat Toilet Partition Bottom Hinge
The Fiat Toilet Partition Bottom Hinge is for use on an 1-1/4" square edged pilaster post. It is constructed of Zamac die cast metal that is then chrome plated and polished. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a Fiat Bathroom Stall Pivot Hinge Bottom 1-1/4". Also known as General, American Sanitary, Flush Metal, Fiat Tiolet Partition 91000P, 9AM280, 9FL700. Manufacture part # 3290. Shipped with mounting screws. A=1-5/8"
9F0301 -
Flush Metal Partition Bottom Hinge
The Flush Metal Partition Bottom Hinge is for use on an 1-1/4" square edged pilaster post. It is constructed of Zamac die cast metal that is then chrome plated and polished. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a Fiat Bathroom Stall Pivot Hinge Bottom 1-1/4". Also known as General, American Sanitary, Flush Metal, Fiat Tiolet Partition 9F0301, 9AM280, 9FL700. Manufacture part # 3290. Shipped with mounting screws. A=1-5/8"
9FL700 -
Toilet Partition Top Hinge Door Escutcheon For 7/8" Thick Door
The Toilet Partition Top Hinge Door Escutcheon For 7/8" Thick Doors has chrome plated Zamac die cast construction. The outside dimensions of the escutcheon are 1" deep by 1-5/8" high by 2-3/8" wide with two of the three holes with a diameter of 5/16" and one at 7/32". The inside dimensions of the U are 1" high by 2-1/16" wide. Also known as a Bathroom Stall Door Insert - Top 7/8". Manufacture part # 2740. Used on Metpar and AMPCO Toilet Partitions.
9CP425 -
Toilet Partition Surface Mounted SS Hinge Set -Rh Out, Lh Inswing
The Toilet Partition Surface Mounted SS Hinge Set are for use on Right Hand Out Swing and Left Hand Inswinging Doors. They feature 1/8" thick stainless steel construction. Outside hinge measurements are 3-1/4" wide by 2-29/32" high. 1-1/2" hole spacing up and down, and 2-3/8" right to left hole spacing. The four mounting holes are 1/4" diameter. This hinge set includes the top and bottom hinges. Also known as Bathroom Stall Gravity Hinge Set. See "More Views" for the handing diagram. Manufacturer part # 7123. Mounting screws are included.
9A7SS1 -
Surface Mounted Stainless Hinge sets LHIN/RHOUT
Surface Mounted Stainless Hinge sets in stock for quick deliveries, this version is a left hand inswing and right hand outswing hinge set, always facing the toilet compartments. The overall wide is 3-1/4" x 3-5/32"ht, the hole spacing is 2-5/16" and 1-1/2"ht with 1/4" holes. This is a gravity type hinge that uses a stainless adjustable pintle to close the door. This part is also known for 7283. All hardware included to install. Maximum door weight is 80lbs.
9A7283 -
Partition Keeper Bumper Inswing 1-1/4"
The Partition Keeper Bumper Inswing 1-1/4" is constructed of Zamac die cast metal that is then chrome plated and polished. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5980. Shipped with screws for mounting.
9A5980 -
Fiat Toilet Partition Top Hinge
The Fiat Toilet Partition Top Hinge is for use on 1-1/4" square edged pilaster posts. It is constructed of Zamac die cast metal that is then chrome plated and polished. The hinge measures 2-1/4" high by 1-1/4" wide. The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 3/8" diameter bushing. Also known as a Fiat Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3790. A=1-5/8"
9F0300 -
Dual Desk Mount Plexiglass Brackets
Brackets designed to mount plexiglass/acrylic sheets to desk surface edge when creating separation/barrier. Brackets are adjustable for thickness from 1/8" to 3/8". It is recommended for use of 1/4" Thick material. Sold as a Pair. Made of Aluminum Alloy. Screws and inserts included. Uses a 5mm/3/16" Allen Key(Not Included) to install screws These are available in either Silver or Black Finish. Silver Finish are readily available while Black Finish may have an extended leadtime depending on quantities being ordered.
Measurements
Height: 2-1/2"
Width: 1-3/4"
Depth: 5/8"
Weight:About 1.3lb
Top to Bottom: 3-5/8"
Plate Width: 1-3/4"
Plate Length: 5-3/4"
Plate Height: 3/16"
Gap/Spacing: 1"
PRM-DDB