Search results for: 'both partition for a fold thei'
-
ASI Roval Paper Towel Dispenser
Roval Paper Towel Dispenser, 20210 Dispenses 400 C-fold or 525 multi-fold paper towels. Fabricated of 22 gauge type 304 stainless steel with satin finish. Fitted with tumbler lock and heavy-duty stainless steel staked piano hinge.
ASI spec sheet20210 -
Retractable White Poly Shower Seat
This rectangular folding shower seat is 18 inches by 16 inches and the one-piece white poly top is 1/2 inch thick. Tubular components are fabricated from stainless steel. All 34 are ADA compliant, and include a self locking mechanism to secure the seat upright when not in use.
9E703P -
Bobrick Recessed Paper Towel & Waste Receptacle
Bobrick B-4369 recessed paper towel dispenser with waste receptacle in a satin finish stainless steel. The unit holds 350 c-fold towel or 475 multifold towels. Leak-proof waste container has a 3 gal. capacity. Removable front panel for cleaning. Wall opening 11-38"w x 26-5/8"ht x 4" minimum depth.
B4369 -
ADA Concealed Latch Fix It Kit with Indicator
ADA Concealed Latch Fix it Kits for metal partitions. For 1" thick doors with a round edge. All Partition security hardware included. ADA Stainless Steel Slide Bolt Latch with Indicator, Keeper and with Stainless Steel "U" Shape cover for both sides of door. Also known as 126629.
9A6629 -
Bobrick Recessed Paper Towel Dispenser with Waste Receptacle
Bobrick B-36903 recessed paper towel dispenser with waste receptacle in a satin finish stainless steel. The door has a 90 degree return. dispenses 300 c-fold or 400 multifold towels. Removable leak-proof waste container has a 1.6 gal. capacity. Rough wall opening 11-1/2"w x 29-1/2"ht x 3-3/4" minimum depth.
B36903 -
Knickerbocker Partition Turn Latch Knob
The Knickerbocker Partition Turn Latch Knob is the male portion of there concealed latches. The cover that goes with this latch is the 9K0255. They are constructed of Zamac die cast metal that is then chrome plated and polished. The manufacturer part number on this piece is 1410. Works with General partitions.Used with powder coated steel toilet partitions.
9K0250 -
Mills Toilet Partition Slide Bolt Latch Concealed
The Mills Toilet Partition Slide Bolt Latch Concealed is a popular latch used by them. Latch cover plates are 1-3/4" wide by 1-3/8" high. The latch switch is 1-15/32" wide. The latch bolt is 3/8" diameter. The spacing between the cover and the latch 1-1-32". They are constructed of Zamac die cast metal that is then chrome plated and polished. This is a one of a kind latch. Also known as a Bathroom Stall Concealed Latch. Manufacture part # 4230, HDWT T290.
90T290 -
Accurate Partition Door Kit Chrome Plated
The Accurate Partition Door Kit Old Style has been used from January 2013 to September 2021. The door kit is replacement hardware for an Accurate Partitions Corp. metal door. The kit includes the top and bottom hinges, nylon inserts, coat hook, keeper bumper, concealed latch and security screws. They are constructed of die cast metal that is then chrome plated and polished. The manufactures part number is 50-8511505.
These hinges will not replace previous version of Accurates old style hinges that are no longer available.
9HACL505 -
Partition Keeper Bumper Inswing Flat Stop Chrome Plated
The Partition Keeper Bumper Inswing Flat Stop Chrome Plated is a strike and keeper that measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-19/32" on center. They are constructed of Zamac die cast metal that is then chrome plated and polished. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5140. Shipped with mounting screws.
90T116 -
Hadrian Partition Top Hinge Concealed
The Hadrian Toilet Partition Top Hinge is considered a surface mounted hinge, as it mounts on the edge of the pilaster post. They are constructed of Zamac die cast metal that is then chrome plated and polished. The 9HH450 Toggle and Screw are not included with this hinge. The manufactures part numbers are 601310 and 601300.
9HH300 -
Partition Double Door Pull 5-1/2" Chrome Plated
The Partition Double Door Pull 5-1/2" Chrome Plated come as two handles for mounting back to back handles on an one inch thick door. The handles have 5-7/8" center to center hole spacing, and the screws included are for a 1" thick door. They are constructed of Zamac die cast metal that is then chrome plated and polished. The manufacturer part number on this part is 610112. Overall width is 6-3/4".
9HH001 -
Partition Surface Mounted Hinge Set Lh Out, Rh Inswing
The Partition Surface Mounted Hinge Set is for use on Left Hand Out Swing and Right Hand Hand In Swinging doors. The hinges raise the door up 1/4" when opening, and then gravity causes the door to shelf close. They measure 1-1/2" center to center hole spacing on the vertical and 2-7/16" center to center on the horizontal. Constructed of cast brass with chrome plating and polished. They are also known as a Bathroom Stall Gravity Hinge Set. Manufacture part # 7011.
9A70B2 -
Partition Hinge Assembly Cast SS For 1" Door To 1" Post
The Partition Hinge Assembly Cast SS is for use on 1" thick Doors and 1" squared edged pilaster Posts. The kit includes top and bottom hinges, pintle, pin, inserts and all of the mounting screws. They are constructed of cast stainless steel that is then brushed to the proper finish. Also known as a Bathroom Stall Pivot Hinge Set. Manufacture part # 63153.
9A3153 -
Partition Bottom Hinge Assembly Cast SS For 1" Door, 1-1/4" Post
The Partition Bottom Hinge Assembly Cast Stainless Steel is for use on 1" Door and 1-1/4" thick square edged Pilaster Posts. They are constructed of cast stainless steel. Set includes bottom hinge, pin, door insert and mounting screws. Also known as a Bathroom Toilet Stall Bottom Hinge Kit. Manufacture part #63033.
9A3033 -
Toilet Partition Surface Mounted SS Hinge Set -Rh Out, Lh Inswing
The Toilet Partition Surface Mounted SS Hinge Set are for use on Right Hand Out Swing and Left Hand Inswinging Doors. They feature 1/8" thick stainless steel construction. Outside hinge measurements are 3-1/4" wide by 2-29/32" high. 1-1/2" hole spacing up and down, and 2-3/8" right to left hole spacing. The four mounting holes are 1/4" diameter. This hinge set includes the top and bottom hinges. Also known as Bathroom Stall Gravity Hinge Set. See "More Views" for the handing diagram. Manufacturer part # 7123. Mounting screws are included.
9A7SS1 -
Global Latch Knob & Cover Stainless Steel
The Global Partitions stainless steel latch knob & cover with Screw, are a concealed latch that is held together by a screw. They are constructed of cast stainless steel metal that is then brushed and polished. The manufacturer part number is 40-8263380. This was used up until October 2021.
9G3380 -
Global Door kits Current Style : Stainless Steel
Global partitions new style door kits, used September 2021 to current. This door kit includes cast stainless steel hardware, hinges and associated parts, slide latch with indicator and door keeper, coat hook. The adder is for outswing doors that included double door pulls, stainless steel top pin and 2" door stop. All security screws included. Factory part number 8263513 for inswing parts and 8263514 for the adder which is double door pulls and door stop. The hinges have been used for over 30 years.
To order out swing version you must order both parts as pictures shown for complete door kit.
9A82 -
ASI Roval Paper Towel Dispenser & Removable Waste Receptacle
Roval Paper Towel Dispenser & Removable Waste Receptacle. Dispenses 350 C-fold, 475 multi-fold paper towels. 2.96 gal. (11.2 L) removable stainless steel waste receptacle with a tumbler lock. 22 gauge type 304 stainless steel door in a satin finish with a flush lock and a heavy-duty 3/16" staked piano hinge on door. Wall Opening: 12 3/4" W x 26 1/2" H x 4 1/4" D
204623 -
Global Partitions Latch Knob Cover, W/ Screw
The Global Partitions Latch Knob Cover, with Screw, are a concealed latch that is held together by a screw. They are constructed of Zamac die cast metal that is then chrome plated and polished. This is one of 3 concealed latches that we know of that are held together by a screw instead of the retaining clip we find on most latches. The manufacture part number is 40-8513380G. This was used up until October 2021.
9G0139S -
Hadrian Toilet Partition Bottom Hinge
The Hadrian Toilet Partition Bottom Hinge is for use on 1-1/4" thick round edged pilaster posts. This hinge is considered a surface mounted hinge because is mounts on the surface of the pilaster. They are constructed of Zamac die cast metal that is then chrome plated and polished. The 9HH450, Toggle and Screw are not included with the hinge, and would have to be ordered separately. The manufacture part number on this piece is 601510 and 601500.
9HH500