Search results for: 'soap n lock flat goods'
-
Global Latch Knob & Cover Stainless Steel
The Global Partitions stainless steel latch knob & cover with Screw, are a concealed latch that is held together by a screw. They are constructed of cast stainless steel metal that is then brushed and polished. The manufacturer part number is 40-8263380. This was used up until October 2021.
9G3380 -
Matte Black Hadrian Headrail
The Matte Black Hadrian Headrail is constructed of aluminum and designed to fit over the top of a 3/4" Pilaster. Comes in lengths of 60", 74" and 96" and are able to be cut down to size needed. Headrails help provide stability for partitions. Known as manufacturers part number 670060-BLK, 670074-BLK, and 670096-BLK.
9H6700B -
Bobrick Toilet Partition Top Hinge Pin
The Bobrick Toilet Partition Top Hinge Pin is used on there Plastic Laminate restroom stalls. The pin features knurled steel construction, and is 3-1/2" long by 3/8" diameter. The knurled end has a threaded hole of a 10-24 screw. Also known as a Bathroom Stall Hinge Pin. Manufacture part # 99109.
9FL625. -
Hadrian Partition Headrail End Cap for Metal
Hadrian Partition Headrail End Plug for Metal and Stainless Steel Partitions. This is used to close off the end of the partition headrail at the top of your partitions. This goes over the 1"x1-5/8"ht outside edge of headrail opening. Known as part number 607220 and used only with Hadrian Partition Company.
9HH075 -
General Partitions Solid Plastic Corner Stalls
- General Partitions Solid Plastic Corner Stalls
- All Toilet Partitions ship from Erie PA 1 week plus travel
- Overhead braced units with top rail for extra support
- All door's, panel's and pilaster bracket kits and parts are included to complete the job.
SPICGE -
B-273 Bobrick Toilet Tissue Dispenser for Single Roll
B-273 Bobrick Toilet Tissue Dispenser for Single Roll. The unit is made of a cast aluminum satin finish with a plastic spindle that is theft resistant. Holds up to one roll 6" diameter. The unit measures 6-1/2"w x 4-7/8" projecting out from the wall. This also has a controlled delivery.
B273 -
Bobrick Recessed Paper Towel & Waste Receptacle
Bobrick B-4369 recessed paper towel dispenser with waste receptacle in a satin finish stainless steel. The unit holds 350 c-fold towel or 475 multifold towels. Leak-proof waste container has a 3 gal. capacity. Removable front panel for cleaning. Wall opening 11-38"w x 26-5/8"ht x 4" minimum depth.
B4369 -
Toilet Partition Keeper- Outswing, For 1-1/4" Square Edge
The Toilet Partition Keeper- Outswing, For 1-1/4" Square Edge is designed for out swinging doors and an 1-1/4" thick square edged pilaster post. The keeper is constructed of cast stainless steel. The part is used by many manufactures on there plastic laminate restroom stalls, and there part number is 40-8562304.
9HAP54 -
Diaper Depot Changing Station Ivory
Diaper Depot Changing Station Ivory
- Attractive, Durable, safe, affordable
- Combines durability with long lasting looks
- Universal Safety instructions
- 4" depth closed, 20" depth open, 34" wide
- Fully hidden gas shock
- Shelf for personal changing items
- Safe strap safety belt
- Molded in hook for purse or diaper bag
- Concave bed
- Includes industrial grade hardware kit for easy installation
- 5 year warranty
9RSS1I -
Flush Metal Partition Nylon Cam
The Flush Metal Partition Nylon Cam is constructed of white nylon. The partition cam head outside diameter is 23/32" and the inside diameter is 1/2". The cams cylinder is 1-13/32" long with a diameter of 5/8". For use with a 1/2" pintle. Also known as a Bathroom Stall Cam. Manufacture part # 98275.
9FL725 -
Flush Metal Partition Nylon Cam
The Flush Metal Partition Nylon Cam For Steel restrooms is constructed of white nylon plastic. Square part of nylon cam is 7/8" by 1-1/8" with a diameter of 11/16". The cam has an overall height of 1-1/4", with a cylinder diameter of 7/8". Also known as a Bathroom Stall Cam. Manufacture part # 98185.
9FL225 -
Ampco Toilet Partition Nylon Cam
The Ampco Toilet Partition Nylon Cam is constructed of white nylon. The partition cam head outside diameter is 23/32" and the inside diameter is 1/2". The cams cylinder is 1-13/32" long with a diameter of 5/8". For use with a 1/2" pintle. Also known as a Bathroom Stall Cam. Manufacture part # 98275.
9CP375. -
General Toilet Partition Latch Knob & Cover
The General Toilet Partition Latch Knob & Cover is constructed of Zamac die cast metal that is chrome plated and then polished. Outside diameter of the knob and cover are 1-5/8" with the inner ring diameter of 1-1/4". Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 1390, 6140.
92000C -
ASI Roval Automatic Roll Paper Towel & Waste Receptacle
Roval Automatic Roll Paper Towel & Waste Receptacle with Smaller waste receptacle, 13.5 gal. (51.1 L), allows installation according to ADAAG. Internal shelf is ideal for paper towel storage. Wall Opening: 15 13/16” x 54 11/16” x 10” Power Source can be hard wired is (AC) or Battery Operated (A) Battery not supplied, 4-D Batteries.
2046921A -
Partition Door Piano Hinge W/Cover rh in/lh out 54" aluminum anodized
Partition Door Piano Hinge W/Cover rh in/lh out 54" aluminum anodized is a heavy duty 1/4" pin with spring to close. this hinge has 5 holes on each side with 13" centers and starts at 1" from top and bottom. The cover makes the hinge holes not as noticeable. Also known as 8674.
9A8674 -
Bobrick Recessed Paper Towel Dispenser with Waste Receptacle
Bobrick B-36903 recessed paper towel dispenser with waste receptacle in a satin finish stainless steel. The door has a 90 degree return. dispenses 300 c-fold or 400 multifold towels. Removable leak-proof waste container has a 1.6 gal. capacity. Rough wall opening 11-1/2"w x 29-1/2"ht x 3-3/4" minimum depth.
B36903 -
Global Partition SS Door Kit
The Global Partition Complete Stainless Steel Door Kit is the manufactures hardware package. They are constructed of cast stainless steel. Included in the kit is a top and bottom hinge, concealed latch, keeper bumper, pintle, cam, coat hook and bumper, all of the hinge pins and the security screws. The manufacture part number is 40-8263501. This was used up until October 2021.
9G500SS -
Toilet Partition Coat Hook 3" Projection X 1-3/4" High
The Toilet Partition Coat Hook 3" Projection X 1-3/4" High is constructed of chrome plated Zamac die cast metal. The hook base measures 1-3/16" wide by 1-9/16" high. The long hook projects out 3" and the short hook projects out 1-1/2". Also known as Bathroom Stall Hook. Manufacture part # 4020. Same as our part # 9AM350.
9G0161 -
Bottom Hinge Assembly Cast SS For 7/8" Door, 1-1/4" Post
The Bottom Hinge Assembly Cast SS is for use on 7/8" thick doors and 1-1/4" thick square edged pilaster posts. The hinge is constructed of cast stainless steel, that is then brushed to the proper finish. The kit includes bottom hinge, pintle, pin, insert and mounting screws. Also known as a Bathroom Stall Bottom Pivot Hinge Set. Manufacture part # 63013
9A3013 -
Curtain Rod Kit, 1" x 48"
Tubing is 1″ diameter x 20 gauge with a satin finish. 48" Length will be as specified. Rod is held captive by flanges when installed properly. Rod may rotate in flanges if turned by hand. Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others. Rod will bend and pull from flanges if significant body weight is suspended.
CURTAIN1x48