Search results for: 'bond door split'
-
Mills Toilet Partition Keeper Bumper
The Mills Toilet Partition Keeper Bumper is for use on 1-1/4" thick square edged pilaster posts. It is constructed of Zamac die cast metal that is then chrome plated and polished. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110. Shipped with mounting screws.
90T120 -
Flush Metal Partition Keeper Bumper Inswing
The Flush Metal Toilet Partition Keeper Bumper Inswing is for use on 1-1/4" thick square edged pilaster posts. It is constructed of Zamac die cast metal that is then chrome plated and polished. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110. Shipped with mounting screws.
9FL925 -
General Solid Plastic Alcove Stalls
- General Solid Plastic Alcove Stalls
- All Toilet Partitions ship from Erie PA 1 week plus travel
- Overhead braced units with top rail for extra support
- All door's, panel's and pilaster bracket kits and parts are included to complete the job.
SPALCOVEGE -
Accurate Toilet Partition Slide Bolt Latch
The Accurate Toilet Partition Slide Bolt Latch is made of zamac die cast metal and then chrome plated and brought to a polished finish. This latch was used by Accurate Partition Corp and Global Partitions. Latch base is 4-1/2" high with 3-1/2" hole spacing. Latch bolt is 3-3/32" long by 1" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch and Toilet Partition Locks. Manufacture part # 5050 and also the same as 9G0136. This latch ships with the mounting screws.
9HAP20 -
Global Partitions Slide Bolt Latch
The Global Toilet Partitions Slide Bolt Latch is made of zamac die cast metal and then chrome plated and brought to a polished finish. This latch was used by Accurate Partition Corp and Global Partitions. Latch base is 4-1/2" high with 3-1/2" hole spacing. Latch bolt is 3-3/32" long by 1" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch and Toilet Partition Locks. Manufacture part # 5050 and also the same as 9G0136. This latch ships with the mounting screws.
9G0136 -
Accurate Partition Bottom Hinge Flat Mount Stainless Steel
Accurate Partition Bottom Hinge Flat Mount Stainless Steel is used for a flat wall surface mount. The hinge is constructed for cast stainless steel and brushed to the desired finish. The hinge hole is 3/8" diameter, and the manufactures part # 3213. A=1-1/2". Used with Accurate Partition doors prior to January 2013.
9HACLFSSB -
General Solid Plastic Free Standing Stalls
- General Solid Plastic Free Standing Stalls
- All Toilet Partitions ship from Erie PA 1 week plus travel
- Overhead braced units with top rail for extra support
- All door's, panel's and pilaster bracket kits and parts are included to complete the job.
SPFSGE -
General Solid Plastic Between Wall Stalls
- General Solid Plastic Between Wall Stalls
- All Toilet Partitions ship from Erie PA 1 week plus travel
- Overhead braced units with top rail for extra support
- All door's, panel's and pilaster bracket kits and parts are included to complete the job.
SPBWGE -
Global Partitions Solid Plastic Braced Urinal Screens
Global partitions solid plastic HDPE for overhead braced privacy dividers manufactured in the USA. All toilet partitions ship in 48-72 hours plus 2-4 days travel. All standard aluminum brackets included. The kit includes 6"x82" pilaster, panel, headrail and all the hardware to assembly. This works great for a privacy near the main restroom door.
9SOBPXX -
Stainless Steel Continuous Hinge, 54", 1/4" Pin, Zero Degree
The Toilet Partition Continuous Hinge Stainless Steel, 54", 1/4" Pin is 54" long by 3" wide with a pin diameter of 1/4". They are constructed of 14 gauge (.075" thick) stainless steel. Holes are spaced every 13" and are 9/32" diameter and has 5 sets of holes. The hinge is self closing by a cam action, which is made possible by angle cuts on the continuous hinge leafs.Cam features Zero Degree Closing. Can be raised up 3/8" for emergency entry. This hinge is also known as a Bathroom Stall Full Length Continuous Hinge. This hinge is non handed. This piece features a cam, which makes it self closing. Manufacture part # 130209,7599, 125319, 650-9402. The hinges must be mounted flat when door is shut. For inside swing the hinges are mounted on the inside of the stall. For the outside they must be mounted on the outside. This hinge is known as 7599.
9A7599











