Accurate| Global Toilet Partition

Do you know who made your partitions for the restrooms in your commercial facility? If you’re a building designer, architect or the primary owner of an establishment, it’s important to know who made the partitions and stalls in the building’s restrooms in case you ever need to order replacement parts.

Accurate Partitions Corp. is a common partitions brand that you will often see in commercial bathrooms. We sell the Accurate partitions parts that they manufacture. We have two pages of our online store dedicated to Accurate partition hardware, so start scrolling to figure out which part you need to trade in.

Like most hardware, toilet partition parts can break, rust or wear out over time. Thankfully, old Accurate partition parts can be easily swapped out for new parts and you can order them right here at Robert Brooke Partitions and Stalls online. 

RB Partitions and Stalls is a leading distributor of commercial bathroom partition hardware. We only sell our toilet partition parts from top name manufacturers. 

We trust the high-quality Accurate partition parts that Accurate Partitions Corp. has been manufacturing for decades. We are pleased to sell the Accurate partitions door hardware that our customers can count on.

We have plenty of products to choose from on our Accurate partitions replacement parts pages. We designed our site so that our customers can search by category for quicker assistance. Just click on the Accurate partitions company hardware page and start browsing our selection of Accurate partitions parts.

Affordable Accurate Partitions Replacement Parts

If the partitions in your facility have a turn latch system, then you might have noticed the Accurate brand name on the outside of the door. Most partitions factories have their own door kits, and one of them that Accurate makes is the turn latch.

Note that Accurate has a new door kit that has been available since January 2013. If your partitions are older, then you would use the old style hinges, keepers and turn latches. If you are unsure of which of these Accurate partition parts your stalls require, let us know and we can assist you.

Your accurate partitions latch can also have the slide bolt design. You will commonly see this standard slide bolt latch in commercial restroom stalls. The design allows you to slide the bolt open and closed to lock and unlock the stall door. Decide which material works best with your restroom style, whether it be Zamac die cast metal or stainless steel construction.

Aside from Accurate partitions latch systems, Accurate partitions can have a number of parts that need to be changed out over time. One of the Accurate stall parts we sell is the ADA door kits that can be used on Accurate metal doors. 

The ADA door kit comes with several parts. This includes hinges plus ADA concealed latch and screws to make your stall door ADA compliant. Take your pick between new style and stainless steel options.

We even sell Accurate Partitions Corp.’s replacement coat hook for restroom stalls. This one-inch-long coat hook also comes with a rubber bumper to prevent scrapes and marks on stall material. It is perfect for hanging coats, purses and bags when using the restroom. For these, you also have the choice of Zamac die cast metal or stainless steel construction.

We have other Accurate partition parts on our online store including Accurate Door Hinge Kits for plastic laminate partitions, toilet partition inswings, outswings and bumpers, hinge pins and hinge cam sets for plastic laminate stall doors, U trim door inserts and more.

It’s likely that the commercial restrooms in your facility might have Accurate partitions in place. Keep this page in mind for when you need to come back to it and order your Accurate partitions replacement parts. 

In order to keep your commercial bathroom up to date, you’ll want to keep up with maintenance and make sure your partitions hardware always remains in good shape. An important part of that process is knowing where to order your Accurate partitions replacement parts so you have a designated store you can easily refer back to in the event that a piece of stall hardware breaks. 

As a busy designer or facility owner, the process can be made easier when you can order your parts online instead of making several trips to hardware stores. Order your new Accurate partition parts from our web store and be sure to make us your go-to Accurate partition hardware provider for future purchases.

Shipping Options for Accurate Stall Hardware

You can order your Accurate partition parts before 2:00 p.m. EST and they will most likely be shipped the same day depending on which particular products you select. The sooner you order, the sooner you will receive the new Accurate partitions parts for your facility’s restroom, and the closer you will be to restoring it.

If the product page shows Lead Time: In Stock above the product description, it means that the select Accurate bathroom partition hardware is in our warehouse and ready for quick shipping. If the item’s Lead Time shows 1-2 days, that means the part is not currently in stock with us and will ship from the factory. 

For any further questions regarding shipping, please contact us and we will be happy to let you know your options. 

Accurate Partitions Company

Accurate Partitions Corp. has been manufacturing their Accurate partitions, Accurate stall hardware and Accurate partitions replacement parts since 1957. At Robert Brooke Partitions and Stalls, we sell replacement Accurate partition parts for your your commercial restroom’s partitions.

Accurate Partitions Corp. is an an ASI company. ASI manufactures partitions and stalls for commercial restrooms, lockers, storage solutions and washroom accessories. They have offices in several countries and their parts are sold to more than 50 countries.

Their Accurate partitions company division is currently headquartered in Burr Ridge, IL. With over 50 years as a manufacturer of commercial partitions hardware, ASI’s Accurate Partitions Corp. has earned its title as a leading manufacturer of commercial restroom partition parts. Our company, RB Partitions and Stalls, is a proud distributor of the accurate partition hardware that the Accurate partitions company manufacturers.

Choosing The Right Accurate Stall Parts

If you have questions about your Accurate toilet partition hardware order, please contact us and let us know your inquiries. Give us a call or email us at Sales@PartitionsAndStalls.com.

With over 35 years of industry experience, we have the know-how to help you decide which Accurate partition hardware you will need for your partitions. Throughout our decades in business, we have worked with various facilities such as schools, athletic buildings and more to provide them with affordable Accurate partitions hardware. 

Trust our expertise to get you the right Accurate partition parts for your commercial restroom stalls. Our goal is that you are 100% satisfied with the Accurate toilet partition hardware that you ordered, so please don’t hesitate to contact us with your questions.


You can always refer to our RBA Partitions and Parts Catalog for more details on the accurate partitions door hardware we provide. provide.

Filter
View as Grid List

22 Items

per page
Set Descending Direction
  1. Global Partitions Solid Plastic 8" Wrap Door Kit

    Global partitions 8" wrap door kit for Solid Plastic material. Comes in anodized aluminum finish and are for 1" thick material only. You will need to choose in or out swing when ordering. Can be used as right or left hand as hinges are field reversible. This is done by taking the 3 pieces apart and reconfiguring the opposite swing. See manufacturers numbers listed below. Used with Global and Accurate partitions.

     

    Inswing Door Kit: 40-8441007

    Outswing door Kit: 40-8441008

    9G844
    $95.00
  2. Global Partitions Solid Plastic Vault Door Kit

    Global partitions vault door kit for Solid Plastic material. Comes in a brushed steel finish and are for 1" thick material only. You will need to choose in or out swing when ordering. Can be used as right or left handed. See manufacturers numbers listed below. Used with Global and Accurate partitions.

     

    Inswing Door Kit: 40-8571007

    Outswing door Kit: 40-8571008

    9G857
    $75.00
  3. Global Partitions Phenolic Vault Door Kit

    Global partitions vault door kit for Phenolic material. Comes in a brushed steel finish and are for 3/4" thick material only. You will need to choose in or out swing when ordering. Can be used as right or left handed. See manufacturers numbers listed below. Used with Global and Accurate partitions.

     

    Inswing Door Kit: 40-8571005

    Outswing door Kit: 40-8571006

    9G85
    $70.00
  4. Global Complete Hinge Set with Rounded Edge

    Global Complete Hinge Set with Rounded Edge. Used currently with these factories Global, General and Flush Metal and Accurate Partitions. Complete as shown in picture with the parts. Includes top pin, top hinge, bottom cam, pintle and bottom hinge and security screws. Used with powder coated steel and stainless steel partitions with a slight round edge. These will not work with old original Accurate Partitions prior to 2013. Used 2013 to current with Accurate Partitions.

    9G663140
    $29.00
  5. Global Door kits Current Style

    Global partitions new style door kits, used September 2021 to current. This door kit includes chrome plated zamac hardware, hinges and associated parts, slide latch with indicator and door keeper, coat hook. The adder is for outswing doors that included double door pulls, stainless steel top pin and 2" door stop. All security screws included. Factory part number 8513513 for inswing parts and 8513514 for the adder which is double door pulls, top pin and door stop. The hinges have been used for over 30 years.

    To order out swing version you must order both parts as pictures shown for complete door kit.

    9A85
  6. Global Door kits Current Style Stainless Steel

    Global partitions new style door kits, used September 2021 to current. This door kit includes cast stainless steel hardware, hinges and associated parts, slide latch with indicator and door keeper, coat hook. The adder is for outswing doors that included double door pulls, stainless steel top pin and 2" door stop. All security screws included. Factory part number 8263513 for inswing parts and 8263514 for the adder which is double door pulls, top pin and door stop. The hinges have been used for over 30 years.

    To order out swing version you must order both parts as pictures shown for complete door kit.

    9A82
  7. Global Door Keeper for Current Latch

    Current style Global chrome plated door catch includes screws for mounting. This is used with the 9g600 latch in ss. Product part number is 40-8212360. This part has a 3/8" gap for the catch and is 2-1/8" in length, 1-5/8" hole spacing and is 3/4" wide. 

    9G711
    $13.42
  8. Global SS Door Keeper for Current Latch

    Current style Global stainless steel door catch includes screws for mounting. This is used with the 9g700 latch in ss. Product part number is 8262360. This part has a 3/8" gap for the catch and is 2-1/8" in length, 1-5/8" hole spacing and is 3/4" wide. 

    9G755
    $18.70
  9. Partition Slide Bolt Latch 1-1/2"W x 3-1/4 L

    The Partition Slide Bolt Latch 1-1/2" wide x 3-1/4 Long is constructed of cast stainless steel, and then brushed to the desired finish.  The hole spacing is 2-3/4" center to center.  This latch is used on Global Partition Corp and Accurate Partition Corp products.  The manufacture part numbers are  40-256300, 40-8562899, and 8698. This latch is Ada approved.

    9HAP68
    $17.08
  10. Partition Slide Bolt Latch W/Indicator Cast Stainless Steel

    The Partition Slide Bolt Latch with Indicator is constructed of Cast Stainless Steel.  It is designed for 3/4" or 1" thick doors, and has a screw spacing of 2-3/4" on center.   We find this latch on Global Partition Corp and Global Partition Corp restroom stalls.  The manufacturer part number is 8563009. This latch is Ada approved. There is no exact replacement available.

    Sorry no longer available, see links for options

    https://www.partitionsandstalls.com/partition-hardware/latches/chrome-plated.html

    https://www.partitionsandstalls.com/partition-hardware/latches/cast-stamped-stainless-steel.html

    9G2000
  11. Global Partitions Plastic Laminate Door Kit For 1"

    Global partitions door kit for plastic laminate material. The hinges and door stop are for 1" thick material only. We offer in a chrome finish or a stainless steel version. You will need to choose in or out swing and which finish you would like. These manufacturers numbers below. Used with Global and Accurate partitions.
    See link for Instructions ***Plastic laminate hinge instructions

    Chrome inswing 8512013
    Chrome outswing 8512014

    Stainless Steel Inswing 8262013
    Stainless Steel outswing 8262014

    9G
    $44.00
  12. Toilet Partition Keeper- Outswing, For 1-1/4" Square Edge

    The Toilet Partition Keeper- Outswing, For 1-1/4" Square Edge is designed for out swinging doors and an 1-1/4" thick square edged pilaster post.  The keeper is constructed of cast stainless steel.  The part is used by many manufactures on there plastic laminate restroom stalls, and there part number is 40-8562304.

    9HAP54
    $15.18
  13. Toilet Partition Keeper- Outswing For 1" Square Edge

    The Toilet Partition Keeper- Outswing For 1" Square Edge is designed for out swinging doors with a 1" thick square edged pilaster post.  It is constructed of cast stainless steel.  The manufactures part number is 40-8562308.

    9HAP56
    $15.18
  14. Toilet Partition Keeper- Inswing For 1" Square Edge

    The Toilet Partition Keeper- Inswing For 1" Square Edge is designed for in swinging doors with a 1" thick square edged pilaster post.  It is constructed of cast stainless steel.  The manufactures part number is 40-8562307.

    9HAP57
    $15.18
  15. Toilet Partition Keeper Outswing For 3/4 Square Edge

    The Partition Keeper - Outswing For 3/4" Square Edge is for out swinging doors and mounted on square edge 3/4" thick pilaster posts.  The keeper is constructed of cast stainless steel.  The manufacture part number is 40-8562306.

    9HAP58
    $15.18
  16. Toilet Partition Keeper- Inswing For 3/4" Square Edge

    The Toilet Partition Keeper- Inswing For 3/4" Square Edge is for in swinging doors with a 3/4" squared edged pilaster post.  It is constructed of cast stainless steel.  We find this keeper used on Global Partition Corp and Accurate Partition Corp restroom stalls.  The manufacture part # on this is 40-8562305

    9HAP59
    $15.18
  17. Partition Keeper Bumper- Inswing For 1-1/4"

    The Partition Keeper Bumper- In swing For 1-1/4"  is for in swinging doors and pilaster posts of 1-1/4" thickness.  The bracket is constructed of die cast metal and then chrome plated and polished.  The Keeper is used by many manufactures.  The manufacture part # is 40-8512353.

    9A2353
    $11.39
  18. Partition Keeper Bumper- Outswing For 1-1/4" Sq Edge

    The Partition Keeper Bumper- Outswing for 1-1/4" Sq Edge is for out swinging doors and square edged pilaster posts of 1-1/4" thickness.  The Keeper is constructed of die cast metal that is then chrome plated.  Used on many toilet partition manufacturers partitions, the manufactures part # is 40-8512354.

    9A2354
    $11.39
  19. Partition Slide Bolt Latch Chrome Plated

    The Partition Slide Bolt Latch Chrome Plated is constructed of Zamac die cast metal that is then chrome plated and polished.  The latch measures 1-1/2" Wide X 3-1/4" High, and 2-3/4" Between Screws.  We find this latch used on Accurate Partition Corp and Global Partition corp restroom stalls.  Also known as a Surface Mounted Bathroom Stall Slide Latch and Toilet Partition Locks. Known as 40-8512899. Shipped with mounting screws. This latch is Ada approved.

    9A2899
    $16.45
  20. Accurate Door Hinge Kit

    Accurate and Global partitions door hinge kits for plastic laminate partitions. The top and bottom hinge kits are the exact same. The door kit includes the hinge, hinge pin, door insert, plastic cam set and all the security screws to install. This part is also known as 63160. The hinge mounts to a pilaster with 1-1/4" thickness, the doors are 1" thick.

    9A63160
    $27.83
  21. ASI Headrail

    ASI Headrail is designed for use with Global and Accurate Partitions. This headrail was introduced in May of 2023 and offers a lower profile than the previous design which is no longer available. The ASI Headrail comes in three headrail thickness options: 3/4", 1" and 1-1/4". Options for length are 65" or 98" which can be cut down to size needed. Being constructed of extruded mluminum, allows for the headrail to be durable and easily customizable. Headrails are use to help stability restroom toilet partitions and give a finished look. Installed a top of pilasters or also used to connect a back wall to a pilaster. Often used in conjuction with ASI Headrail Retrun Kit (9A8448).

    Known as Manufacturer Part# 8440651, 8440981, 8460651, 8460981, 8450651 and 8450981.

    Also known as Part# 9A846534, 9A849834, 9A84651, 9A84981, 9A8465114, and 9A8498114.

    9A84
    As low as $51.00
  22. ASI Headrail Return Kit

    ASI Headrail Retrun Kit is designed to work with Global and Accurate Partitions. Manufacturered to work with the new style headrails introduced in May of 2023 which are a lower profile than the previous models that are no longer available. The headrail retun kit will work with the 3/4", 1" and 1-1/4" thickness headrails from ASI. This kit includes (2) Brackets, (2) Wall Anchoring Screws, (2) Plastic Anchors, (4) Fastening Screws and (1) Headrail End Cap. Can be used to run across the top of partitions either between two wall or runnning from a rear wall to a pilaster. Often used in conjuction with ASI Headrail (9A84) Manufacturer Part# 40-8448100.

    9A8448
    $15.00
View as Grid List

22 Items

per page
Set Descending Direction