Knickerbocker Toilet Partition
Everything you need for your Bathrooms
You will find everything from Global Toilet Partition complete commercial restroom partition toilet stall systems or just door's, panel's, pilasters and privacy screens on our website. Accessories from Hand Dryers, Toilet Paper Holders, Paper Towel Dispensers, Fem nap Disposal units, foaming soap dispenser and more. Partition hardware is separated by manufacture for Door hardware, this is very important to know your manufacture of partitions. All generic parts for the manufactures are typically brackets, door pulls, coat hooks, slide latches, keepers and more on our website. All Toilet partitions are not returnable, every order is made per customer. Email us for assistance.
-
Knickerbocker Toilet Partition Bottom Hinge
The Knickerbocker Toilet Partition Bottom Hinge is used on round edged 1-1/4" thick pilaster posts. It features chrome plated Zamac die cast construction. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" to center hole with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3420. A=1-11/16"
9K0230 -
Knickerbocker Toilet Partition Top Hinge
The Knickerbocker Toilet Partition Top Hinge is constructed of Zamac die cast metal that is chrome plated and polished. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" and is 1/2" thick with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 3910. A=1-11/16".
9K0240 -
Knickerbocker Partition Top Hinge Casting
The Knickerbocker Partition Top Hinge Casting is constructed of Zamac die cast metal and is not plated. This piece is used on Knickerbocker, Global and General Partitions metal doors, there maybe more, but this is all we know at this point. The outside measurements are 2-7/31" by 2-11/16" x 2-5/8", which is the measurement, less the tabs that go into the door. The hole throgh the center has a diameter of 1/4". The manufactures part number is 4646.
9K0245 -
Knickerbocker Partition Turn Latch Knob
The Knickerbocker Partition Turn Latch Knob is the male portion of there concealed latches. The cover that goes with this latch is the 9K0255. They are constructed of Zamac die cast metal that is then chrome plated and polished. The manufacturer part number on this piece is 1410. Works with General partitions.Used with powder coated steel toilet partitions.
9K0250 -
Knickerbocker Partition Ada Latch Knob & Cover
The Knickerbocker Partition Ada Latch Knob & Cover is constructed of Zamac die cast metal that is then chrome plated and polished. The Cover has an outer diameter of 1-3/4" with a 1-11/32" inner ring diameter. The Knob has an outer diameter of 1-5/8" and and inner diameter of 1-11/32". ADA Lever is 3-3/4" long. Also known as a Bathroom Stall ADA Concealed Latch. Manufacturer part # 6170. Works with General partitions. Used with powder coated steel toilet partitions.
9K0250A -
Knickerbocker Partition Door Latch Mechanism Kit
The Knickerbocker Partition Door Latch Mechanism Kit is used on there concealed latches. The bar measures 11/32" diameter by 3-7/16" long. The Fulcrum measures 1-11/32" by 1-11/32 by 5/16" thick. This part is also known as 8836, H749 and H748. Works with General partitions. Used with plastic laminate toilet partitions.
9K0253 -
Knickerbocker Partition Latch Knob Cover
The Knickerbocker Partition Latch Knob Cover is the female portion of there concealed latches. The latch knob that goes with this latch is the 9K0250. They are constructed of Zamac die cast metal that is then chrome plated and polished. The manufacturer part number on this piece is 2620. Works with General partitions. Used with powder coated steel toilet partitions.
9K0255