Flush Metal
Everything you need for your Bathrooms
You will find everything from Global Toilet Partition complete commercial restroom partition toilet stall systems or just door's, panel's, pilasters and privacy screens on our website. Accessories from Hand Dryers, Toilet Paper Holders, Paper Towel Dispensers, Fem nap Disposal units, foaming soap dispenser and more. Partition hardware is separated by manufacture for Door hardware, this is very important to know your manufacture of partitions. All generic parts for the manufactures are typically brackets, door pulls, coat hooks, slide latches, keepers and more on our website. All Toilet partitions are not returnable, every order is made per customer. Email us for assistance.
-
Flush Metal Partition Latch Housing
The Flush Metal Partition Latch Housing is constructed of Zamac die cast metal. The latch body measures 3-3/8" deep by 1-15/16" high. The face plate is 3-1/4" high. The latch bolt is 11/32" diameter and has a travel of 7/16". Also known as a Flush Metal Bathroom Stall Concealed Latch Housing. Manufacture part # 6606.
9A6606 -
Flush Metal Partition Bottom Hinge
The Flush Metal Toilet Partition Bottom Hinge is for use on 1-1/4" thick round edged pilaster posts. It is constructed on Zamac die cast metal that is chrome plated and polished. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Also known as a Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3010. Shipped with mounting screws. A=1-7/6".
9FL200 -
Flush Metal Partition Top Hinge Casting
The Flush Metal Partition Top Hinge Casting is for use on there metal restroom stalls. It is constructed of Zamac die cast metal. The outside dimensions of the top hinge casting are 5-1/8" high by 2-5/8" deep by 25/32" wide. Two of the three holes are 3/8" diameter, and the other hole is threaded for a 5/16-18 screw. Also known as a Bathroom Stall Door Insert - Top 1". Manufacture part # 4556.
9FL265 -
Flush Metal Partition Top Hinge
The Flush Metal Partition Top Hinge is for use on 1-1/4" thick round edged pilaster posts. It is constructed of Zamac die cast metal that is then chrome plated and then polished. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 3/8" diameter. Also known as a Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3510. Shipped with mounting screws. A=1-7/6"
9FL100 -
Flush Metal Partition Ada Latch Knob & Cover
The Flush Metal Toilet Partition Ada Latch Knob & Cover is constructed of Zamac die cast metal that is then chrome plated and polished. Outside diameter of the knob and cover are 1-5/8" with the inner ring diameter of 1-1/4". The ADA Barrier Free Lever is 2-9/16" long when measured from the all the way across the cover. The cover has an overall depth of 1-1/4". Also known as a Bathroom Stall Concealed ADA Latch Cover and Knob Assembly. Manufacture part # 6150
9FL325A -
Flush Metal Partition Bottom Cam Housing Chrome Plated
The Flush Metal Partition Bottom Cam Housing Chrome Plated is constructed of Zamac die cast metal that is then chrome plated and polished. The bottom cam housing measures 1-3/16" wide by 3" deep. The screw hole is 9/32" diameter. Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 4090.
9FL275CH
