Search results for: 'braze dual stop'
-
Swing Up Grab Bar
Swing Up Grab Bar (1-1/4" O.D) - Smooth - With Detent Stops at 0°, 45° and 90° Positions.Features include flange of 3″ diameter, 1/8″ thick type 304 stainless steel with a satin finish; exposed mounting screw holes are drilled and countersunk. Swing Up Grab Bar Locks firmly into place when lifted into an upright position. 1-1/4" OD. Projects 30" from wall. When properly mounted, swing-up type bar will sustain a static load of 250 lbs. Known as 10-3414.
3410 -
Partition Concealed Latch Keeper Bumper Cast SS 1"
Concealed Partition Latch Keeper Bumper 1" Square Edge Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measures 2-1/2" tall by 1-15/16" wide by 1-17/32 deep. The mounting holes are 1-1/2" on center. The stop measures 7/8" wide by 17/32" deep with a rubber insert bumper. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1". Manufacture part # 5733.
Shipped with mounting screws.
9A5733 -
Keeper Bumper For 1-1/4" Outswing Round Edge
Chrome Plated Keeper Bumper For 1-1/4" Outswing Round Edge Post
Zamac die cast and polished chrome plate construction. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. Commonly known as a Bathrrom Stall Strike and Keeper Outswing 1-1/4". Manufacture part # 5410
Shipped with mounting screws.
9G015E -
Toilet Partitions Bumper Keeper Chrome Plated 1-1/4" Round Edge
Chrome Plated Toilet Partitions Bumper Keeper For 1-1/4" Round Edge
Polished chrome plated Zamac construction. The strike and keeper measures 2-1/2" tall by 1-7/8" wide. The mounting holes are 1-1/2" on center. The stop measures 3/4" wide by 17/32" deep with a rubber insert bumper. Slot is 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5430.
Shipped with mounting screws.
9A5430 -
Global Wall Hung Urinal Screens Steel
Ordering Online All Powder Coated Metal Wall Hung Urinal Screens Manufactured by Global Partitions. All toilet partitions ship in 48-72 hours plus 2-4 days travel. Wall Hung 1" thick by 48" high panel. Available in the following widths - 12, 18, 24" x 48"ht screen. Two Standard Chrome Plated Brackets included.
9SWHSXX -
American Specialties Turbo Dri High Speed Dryer
Turbo Dri High Speed Dryer American Specialties introduces the Turbo Dri High Speed Dryer 0197 model. Quick drying — less than 12 seconds Operates automatically using infrared sensor Auto-resetting thermostat 60-second automatic shut off Cover fabricated of heavy-duty, one-piece-formed stainless steel. Overall Size 8 1/16" W x 11 19/64" H x 7 5/64" D.
9a0197 -
Toilet Partition Keeper Bumper Inswing Cast SS 1" Post Sq Edge
Partition Keeper Bumper Inswing 1" Post Square Edge Cast Stainless Steel
Cast stainless steel construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. The slot is 5/16" deep by 1-1/2" high. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing 1". Manufacture part # 5623.
Shipped with mounting screws.
9A5623 -
Global Partitions Plastic Laminate Door Kit For 1"
Global partitions door kit for plastic laminate material. The hinges and door stop are for 1" thick material only. We offer in a chrome finish or a stainless steel version. You will need to choose in or out swing and which finish you would like. These manufacturers numbers below. Used with Global and Accurate partitions.
See link for Instructions ***Plastic laminate hinge instructionsChrome inswing 8512013
Chrome outswing 8512014Stainless Steel Inswing 8262013
Stainless Steel outswing 82620149G -
General Toilet Partitions Keeper Bumper Concealed
The General Toilet Partitions Keeper Bumper Concealed is for used with concealed latches and 1-1/4" thick square edged pilaster posts. It is constructed of Zamac die cast metal that is chrome plated and polished. The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5230. Shipped with mounting screws.
92560E -
Accurate Toilet Partition Keeper Bumper for Outswing
The Accurate Toilet Partition Keeper Bumper for Outswing doors is constructed of Zamac die cast metal and then chrome plated and polished. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for out swinging doors. Also known as a Bathroom Stall Strike and Keeper-Out Swing 1-1/4" Square Edge. Manufacture part # 5210. Shipped with mounting screws.
9HAP23 -
Accurate Partition Alcove Stalls in Steel
Accurate Commercial Partition Alcove Handicap Stalls in Powder Coated Steel overhead braced floor mounted compartments. The alcove stall includes 36" door, 2 pilasters and panel to make up the distance. Accurate Doors can be either in or out swing. All partition hardware included with standard chrome hardware for the door kits and brackets. All toilet partitions ship in 48-72 hours plus 2-4 days travel. New Style slide latch with indicator in chrome plated version included. New Door style are Integrated for no gap off doors.
PCSALCOVEA -
Global Toilet Partitions Keeper Bumper Concealed
The Global Toilet Partitions Keeper Bumper Concealed is for used with concealed latches and 1-1/4" thick square edged pilaster posts. It is constructed of Zamac die cast metal that is chrome plated and polished. The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5230. Shipped with mounting screws.
9G631H -
Partition Keeper Bumper Cast SS Inswing 1-1/4" Post Sq Edge
Partition Keeper Bumper Inswing 1-1/4" Post Square Edge Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5113.
Shipped with mounting screws.
9A5113 -
Flush Metal Partition Keeper Bumper
The Flush Metal Partition Keeper Bumper is for use on square edged 1-1/4" thick pilaster posts. The keeper is constructed of Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for out swinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210. Shipped with mounting screws.
9FL900 -
Fiat Partition Keeper Bumper Outswing
The Fiat Partition Keeper Bumper Outswing is designed to be mounted on 1-1/4" square edged pilaster posts. It is constructed of Zamac die cast metal that is then chrome plated and polished. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210. Shipped with mounting screws.
9F0303 -
Metpar Toilet Partition Keeper Bumper
The Metpar Toilet Partition Keeper Bumper is for use on square edged 1-1/4" thick pilaster posts. The keeper is constructed of Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for out swinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210. Shipped with mounting screws.
9CP200 -
American Specialties Turbo Dri Jr Surface mounted High Speed Dryer
Compact high-speed hand dryer for applications where less space is available. 5-year warranty. 9-25/32" W x 6-5/8" H x 5-7/16" D
FEATURES- Quick drying — less than 15 seconds
- Operates automatically using infrared sensor
- Auto-resetting thermostat
- 60-second automatic shut off
- Cover fabricated of heavy-duty, one-piece-formed stainless steel
9a0198 -
Concealed Latch Keeper Bumper Cast SS Outswing 1-1/4" Round Edge
Concealed Partition Latch Keeper Bumper Outswing 1-1/4" Round Edge Cast Stainless Steel
Cast stainless Steel Construction. The outside dimensions are 2-3/8" wide by 1-1/4" high by 1-3/4" deep. Stop projects out 1-1/8" by 1/2" thick with a rubber insert. Designed for an 1-1/4" thick post round edge. Also known as a Bathroom Stall Strike and Keeper Outswing 1-1/4". Manufacture part # 5573.
Shipped with mounting screws.
9A5573 -
Keeper Stmped Stainless Steel For 3/4" Door, 1-7/8" Between Screws
Partition Strike And Keeper For 3/4" Door, 1-7/8" Between Screws Stamped Stainless Steel
Stamped stainless steel .075" thick construction. The strike and keeper measure 2-7/8" high by 2" wide with a 1-7/8" hole spacing. The stop posts are 5/8" wide by 7/8" tall with rubber inserts. For use with 3/4" square edge posts. Also known as a Bathroom Stall Strike and Keeper Outswing 3/4". Manufacture part # 6379.
Shipped with mounting screws.
9A6379 -
Mills Toilet Partitions Keeper Bumper Concealed
The Mills Toilet Partitions Keeper Bumper Concealed is for use on 1-1/4" thick round edged pilaster posts. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. They are constructed of Zamac die cast metal that is then chrome plated and polished. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5590. Shipped with mounting screws.
90T317 -
Partition Keeper Bumper Cast SS Inswing 1-1/4" Sq Edge
Partition Keeper Inswing 1-1/4" Square Edge Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. The slot measures 13/16" high by 1/4" deep. Commonly known as a Bathroom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5343.
Shipped with mounting screws.
9A5343 -
Flush Metal Partition Keeper Bumper Concealed
The Flush Metal Partition Keeper Bumper Concealed is for use with concealed latches that have 1-1/4" thick squared edged pilaster posts. They are constructed of Zamac dia cast metal that is chrome plated and then polished. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5510. Shipped with mounting screws.
9FL400 -
ASI Matte Black TURBO Pro Auto High Speed Hand Dryer ADA Compliant 0196-41
ASI Matte Black turbo pro auto high speed hand dryer is ADA Compliant and is surface mounted. Features HEPA filter, air temperature controls, air speed controls and also a 5 year warranty. Some other features include energy efficient, quiet, and easy to maintain. The product is stainless steel with a matte black powder coated finish. With a matte black finish this product offers a more sophisticated and bold look while being aesthetically appealing to the eye.
Dimensions
8-5/8″ x 13-9/16″ x 4″ (219 x 345 x 101 mm)
Decibel Level
68 to 73.8 dB-A @ 2m
Electric
Different models for operating voltage
110~120 V (50/60 Hz),
220~240 V (50/60 Hz)ON/ OFF Heat Option
Nichrome Wire
325 – 500 WMotor: .67HP, 16 – 29 kRPM
Brush type, dual ball bearingsB10-0196 -
Baby Changing Tables Surface Mount Gray
Modern styling baby changing tables and easy-to-clean surface is fabricated of 100% high-density polyethylene. Sturdy child protection has 350 lb. (159 kg.) load capacity, concave changing surface, and safety strap. Easy opening-closing pneumatic mechanism has oversized hinge and safety stop system. Sealed components and absence of "pinch points" promote safe operation. The built-in dispenser for towels or sanitary liners, hooks for diaper bag and purse, plus multi-lingual instructions add friendliness and convenience. Surface mounted. Only 4" deep when closed. Complies with Handicapped Accessibility codes.Overall SizeClosed: 22 1/4" x 36" x 3 7/8" (570 x 920 x 100 mm). Open: 22 1/4" x 36" x 20 7/16" (570 x 920x 520 mm).9R104 -
American Sanitary Toilet Partition Keeper Bumper Inswing
The American Sanitary Toilet Partition Keeper Bumper Inswing is designed for use on square edged 1-1/4" thick pilaster posts. It is constructed of Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for in swinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110. Shipped with mounting screws.
9AM450 -
Accurate Partition Corner Stalls in Steel
Accurate Partition Corner Stalls in Powder Coated Steel. Also known as Baked Enamel Partitions. Overhead braced floor mounted stalls. Standard stalls are 36"x 60" depth (with 24" door), ADA stalls are 60"x60" depth (ADA with 36" door). All brackets, door kits, headrails and brackets are included to install properly. Doors can be either an in or out swing. Up to 8 standard stalls total or 7 standard and 1 ada stall. All toilet partitions ship in 48-72 hours plus 2-4 days travel. To have an ADA stall you must select 1 ADA 24x60, plus 1 standard stall for 1 complete 60x60 ada stall. To have an ADA stall & standard stall, you must select 2 standard stalls and 1 ADA stall 24x60. New Style slide latch with indicator in chrome plated version included. New Door style are Integrated for no gap off doors.
PCSICA -
Partition Keeper Bumper Cast SS For 1-1/4" Sq Post
Partition Keeper Bumper For 1-1/4" Square Post Outswing Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5213.
Shipped with mounting screws.
9A5213 -
General Keeper Bumper For Concealed 1-1/4"
The General Keeper Bumper For Concealed 1-1/4" is for use with concealed latches that have 1-1/4" thick squared edged pilaster posts. They are constructed of Zamac die cast metal that is chrome plated and then polished. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5510. Shipped with mounting screws.
92060B -
Bobrick Partition Keeper Bumper Outswing
The Bobrick Partition Keeper Bumper Outswing is designed for use on a 1" thick square edged pilaster post. The keeper is constructed of die cast metal and then chrome plated. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Outswing 1". Manufacture part # 5720. Shipped with mounting screws.
9A5720 -
General Toilet Partition Keeper Bumper For 1-1/4" Inswing Sq Edge
The General Toilet Partition Keeper Bumper For 1-1/4" Inswing Sq Edge is for use on 1-1/4" thick square edged pilaster posts. It is constructed of Zamac die cast metal that is then chrome plated and polished. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110. Shipped with mounting screws.
920601 -
Toilet Partition Concealed Latch Keeper Bumper Outswing Cast SS
Concealed Latch Keeper Bumper Outswing Cast Stainless Steel
Cast Stainless Steel casting. The strike and keeper is 1-1/4" high by 1-3/4" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5643.
Shipped with mounting screws.
9A5643 -
Partition Inswing Keeper For Throw Ltc For 1-1/4" Sq Post
The Partition Inswing Keeper For Throw Latch for use on a 1-1/4" Square Post or pilaster. They are constructed of Zamac die cast metal that is then chrome plated and polished. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. The slot measures 13/16" high by 1/4" deep. Commonly known as a Bathroom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5340. Shipped with mounting screws.
9S410T -
ASI Roval Recessed Hand Dryer
Roval Recessed Hand Dryer, 20199
This high performing hand dryer, with a drying time of less than 15 seconds, has a cover made of 18 gauge stainless steel and uniquely complements the Roval™ Collection with its bowed face and gently radiused edges. 5-year warranty.
FEATURES:
- Quick drying — less than 15 seconds
- Operates automatically using infrared sensor
- Auto-resetting thermostat
20199 -
Bobrick Partition Keeper Bumper Inswing
The Bobrick Partition Keeper Bumper Inswing is constructed of chrome plated Zamac die cast metal. The keeper is designed for 1" thick squared edged pilaster posts. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. The slot is 5/16" deep by 1-1/2" high. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing 1". Manufacture part # 5620. Shipped with mounting screws.
9A5620 -
American Sanitary Toilet Partition Keeper Bumper
The American Sanitary Toilet Partition Keeper Bumper is for use on square edged 1-1/4" thick pilaster posts. The keeper is constructed of Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for out swinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210. Shipped with mounting screws.
9AM415 -
Partition Concealed Keeper Bumper Inswing Cast SS
Concealed Partition Latch Keeper Bumper Inswing Cast Stainless Steel
Stainless steel casting. The strike and keeper is 1-1/4" high by 2-1/2" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. The slots are 1/4" deep. Also known as a Bathroom Stall Strike and Keeper Inswing Flat. Manufacture part # 5653.
Shipped with mounting screws.
9A5653