Search results for: 'both drawn slot'
-
Partition Inswing Keeper For Throw Ltc For 1-1/4" Sq Post
The Partition Inswing Keeper For Throw Latch for use on a 1-1/4" Square Post or pilaster. They are constructed of Zamac die cast metal that is then chrome plated and polished. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. The slot measures 13/16" high by 1/4" deep. Commonly known as a Bathroom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5340. Shipped with mounting screws.
9S410T -
Toilet Partition Keeper Stamped Stainless Steel 1-7/8" Between Screws
Partition Keeper 1-7/8" Between Screws Stamped Stainless Steel
Stamped stainless steel .075" thick construction. The keeper measures 2-5/8" high by 1-3/8" wide with a 1-7/8" hole spacing. The slot is 1-5/16" high by 5/16" high. Also known as a Bathroom Stall Keeper - Inswing. Manufacture part # 6499.
Shipped with mounting screws.
9A6499 -
Partition Concealed Keeper Bumper Inswing Cast SS
Concealed Partition Latch Keeper Bumper Inswing Cast Stainless Steel
Stainless steel casting. The strike and keeper is 1-1/4" high by 2-1/2" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. The slots are 1/4" deep. Also known as a Bathroom Stall Strike and Keeper Inswing Flat. Manufacture part # 5653.
Shipped with mounting screws.
9A5653 -
Toilet Partition Flat Stop Keeper Chrome Plated
Chrome Plated Toilet Partition Flat Stop Keeper
Polished chrome plated Zamac construction. The keeper base is 2-1/2" tall by 1-3/32" wide. The latch face measures 2-1/2" tall with a 7/8" projection. The hole spacing is 1-1/2". The slot measures 5/16" by 1-9/16". Also known as a Bathroom Stall Keeper-Inswing Flat. Manufacture part # 5160.
Shipped with mounting screws.
9S2401J -
Partition Surface Keeper Inswing Cast SS 1-1/2" Screws
Partition Inswing Surface Keeper 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The keeper base is 2-1/2" tall by 1-3/32" wide. The latch face measures 2-1/2" tall with a 7/8" projection. The hole spacing is 1-1/2". The slot measures 5/16" by 1-9/16". Also known as a Bathroom Stall Keeper-Inswing Flat. Manufacture part # 5163.
Shipped with mounting screws.
9A5163 -
Partition Keeper Bumper Cast SS Inswing 3/4"
Partition Keeper Bumper Inswing 3/4" Square Edge Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 3/4". Manufacture part # 4903.
Shipped with mounting screws.
9A4903 -
Toilet Partition Keeper Bumper Chrome Plated 1-1/4" Round Edge
Chrome Plated Toilet Partition Keeper Bumper For 1-1/4" Round Edge Post
Polished chrome plated Zamac construction. The strike and keeper measure 1-1/4" high by 2-3/8" wide by 1-3/4" deep. The stop is 1/2" thick and projects out 1-1/8". The slot is 7/16" wide by 5/8" high. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5590.
Shipped with mounting screws.
9A5590 -
Partition Keeper Bumper Inswing Cast SS 1" Sq Edge
Partition Keeper Bumper Inswing 1" Square Edge Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 1". Manufacture part # 5823.
Shipped with mounting screws.
9A5823 -
Partition Concealed Latch Keeper Bumper Cast SS 1-1/4"
Concealed Partition Latch Keeper Bumper 1-1/4" Square Edge Cast Stainless Steel
Cast stainless steel construction. The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5233.
Shipped with mounting screws.
9A5233 -
Toilet Partition Concealed Latch Keeper Bumper Cast SS 1-1/4" Sq Edge
Concealed Partition Latch Keeper Bumper 1-1/4" Square Edge Cast Stainless Steel
Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-3/4" deep. The strike is a1/2" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5963.
Shipped with screws for mounting.
9A5963 -
Keeper Bumper For 1-1/4" Inswing Round Edge
Chrome Plated Keeper Bumper For 1-1/4" Inswing Round Edge Post
Zamac die cast and polished chrome plate construction. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. The slot measures 1-9/16" high by 5/16" deep. Commonly known as a Bathrrom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5310
Shipped with mounting screws.
9G0151 -
Partition Concealed Latch Keeper Bumperr 1-1/2" Screws
Concealed Partition Latch Keeper Bumper For 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-13/16" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. The slot is for the concealed latch is 7/8" high by 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5243
Shipped with mounting screws.
9A5243













