Partition Brackets
Browse our stockpile of toilet partition brackets for restroom partitions. The bathroom partition brackets we sell can be used in public restrooms to replace any worn out bathroom partition brackets that were previously in place.
We have been selling brackets and similar hardware for almost 40 years, and we assure you that the bathroom partition brackets you receive from us are some of the best around. We have been able to supply bathroom partition brackets to many types of organizations and we always welcome working with other companies.
Our website offers a time-saving way to shop for bathroom partition brackets. There is no need to make trips to the hardware store when you have an online source for purchasing bathroom partition brackets from your home or place of business. Our wish is that our user-friendly service greatly accommodates our customers while they shop for bathroom partition brackets.
Bathroom Partition Brackets Styles
In order to make sure you purchase the right parts and can assemble them correctly, you will have to understand a little bit about how bathroom partition brackets work. Bathroom partition brackets are pretty much what hold restroom partitions together. Without bathroom partition brackets, your restroom partitions would very likely be useless.
There are several different kinds of bathroom partition brackets plus similar hardware that often falls under the same category. You will want to understand what type of brackets are required to fix your bathroom stall before placing your order.
Among the different types of bathroom partition brackets are U shaped brackets, L shaped brackets, H shaped brackets and F shaped brackets. It’s easy to gauge which type of bracket it is when you look at its shape.
U shaped bathroom partition brackets create a T to connect a pilaster to a panel. There are also Continuous U Shaped Brackets which are much longer than the standard shaped U bracket.
Our bathroom partition brackets supply also consists of one ear and two ear brackets. One ear brackets also go by the name one wing bracket or single leg bracket. They are also sometimes called F shaped brackets.
One ear brackets are used at the end panel on the back wall of partitions. Two ear brackets are used with mid bracket panels to mount partitions to the back wall. Fasteners are included with all brackets.
Urinal Screen Bracket
We carry several styles of urinal screen brackets. The urinal screen brackets that we have for sale come in different shapes, sizes and materials. Urinal screen brackets hold urinal screen dividers to the restroom wall.
Alcove Clips
We carry a few types of alcove clips. Alcove clips connect a panel to a pilaster inline while partition braces help support a panel off the floor.
We have die cast zamak Alcove Clips that can be used on 1-inch doors and 1-¼-inch posts. We also have the Alcove 2 Piece Clip Set in die cast zamak and stainless steel.
Pilaster Shoes
We also have pilaster shoes listed in our selection of brackets. Pilaster shoes are often referred to as floor shoes. We have two types of pilaster shoes in stock on our webstore.
Both of the floor shoes we sell can be used on square shaped posts. They are both made of zamak metal, but they differ in size.
Product Sizes
Always check the sizing details of the brackets we sell. This will show you what size pilasters each bracket can generally be used with. The hardware could be good to use on 1-¼ inch thick pilasters and 1-¼ inch thick panels, but not on another size.
Toilet Partition Brackets Materials
Check to see the material the brackets are made out of. We offer brackets in a variety of materials such as chrome plated zamak die cast metal, stamped stainless steel, cast stainless steel, and extruded anodized aluminum.
The product pages will have descriptions of which material each bracket product is constructed of. Our product descriptions not only show you the material of the hardware, but they also display part numbers, sizes, how the product is used and any important attachments that come with it. Type of material will be a significant decision to make when purchasing bathroom partition brackets so don’t overlook it.
Zamak die cast is the standard material that you will see on many bathroom partition brackets. Each material is good for a specific use.
Are you looking for seriously strong brackets? If so, then our staff at RB Partitions and Stalls recommend that your bathroom partition brackets have full length aluminum channels or stainless steel continuous channels.
Bathroom Partition Brackets Online Distributors
If it is a weekday during business hours, then our bathroom partition brackets team is currently standing by to answer your questions. We will also respond to messages sent to us during the weekend on the following business day.
Facilitating the process of buying new bathroom partition brackets so that you can make large scale improvements to your building’s restroom is our mission. We try to lend a hand in distributing great products such as bathroom partition brackets to customers whenever we can.
We would like to further assist you with your questions about material, size, price, shipping, and installation of bathroom partition brackets. Send out an email about bathroom partition brackets to Sales@PartitionsAndStalls.com so that we can take care of answering those questions that you have. For more direct assistance with brackets, you can even call our business phone at (800) 642-2403.
-
Two Ear Bracket For 3/4" x 1-1/2" x 2-1/2"L
If your toilet partition (bathroom stall) wall bracket is stamped 1620, then chances are you have the Two Ear Wall Bracket for 3/4″ thick toilet partition panels. This brackets base is 1-3/8″ wide x 3″ long with 2-7/32″ center to center hole spacing. The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. The bracket is made of a die cast material that is then chrome plated. The bracket sometimes goes by the name Bathroom Stall (toilet partition) Two Ear Bracket or Wall Bracket
9A0162 -
Toilet Partition Two Ear Urinal Bracket Cast SS 1" X 1-1/2" X 2-1/2"
Toilet Partition Two Ear Urinal Wall Bracket For 1" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 4" with 3" centers on the mounting holes. The bracket legs project out 2-1/2" with the thru hole at 2-1/8" from the back of the base. Walls are 1/8" thick. Also know as a Bathroom Stall Partition Urinal Screen Bracket - Two Ear 1". Manufacture part # 1613.
Ships with mounting screws.
9A1613 -
Toilet Partition Bracket Two Ear Aluminum For 1" Panel,3" H X 2-3/4" L
Toilet Partition Bracket Two Ear For 1" Thick Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3" high by 3-3/4" wide with the mounting holes 2-3/4" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The 8 holes are 1/4" diameter. All wall thicknesses are 1/8". This bracket is sometimes known as a Bathroom Stall Two Ear Wall Bracket, or Toilet Partition Two Ear Wall Bracket. The manufacturers part number is 2264 and 650-1839. This bracket ships with all the needed fasteners.
9A2264 -
Partition Continuous One Ear Bracket Stainless Steel 1" x 2-1/2" X 54"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel x 54" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 2-1/2" x 54" long. Mounting holes are 1-15/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2879.
9A2879 -
Partition Two Ear Bracket For 7/8" x 1-1/2" x 2-1/2" L
If your toilet partition (bathroom stall) wall bracket is stamped 1630, then chances are you have the Two Ear Wall Bracket for 7/8″ thick toilet partition panels. This brackets base is 1-3/8″ wide x 3-1/2″ long with 2-3/4″ center to center hole spacing. The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. The bracket is made of a die cast material that is then chrome plated. The bracket sometimes goes by the name Bathroom Stall (toilet partition) Two Ear Bracket or Wall Bracket.
9A0163 -
Two Ear Urinal Screen Bracket Cast SS For 1" Panel 1-1/2" x 3-1/2
Toilet Partition Two Ear X- Long Urinal Wall Bracket For 1" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 4" with 3" centers on the mounting holes. The bracket legs project out 3-1/2" with the thru hole at 3-1/8" from the back of the base. Walls are 1/8" thick. Also know as a Bathroom Stall Partition Urinal Screen Bracket - Two Ear Extra Long 1". Manufacture part # 1283.
Ships with mounting screws.
9A1283 -
Continuous One Ear Bracket Stainless Steel 1" x 2-1/2" X 57"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel x 57" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 2-1/2" x 57" long. Mounting holes are 1-15/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2339.
9A2339 -
Partition Continuous "H" Bracket For 1" X 1" X 54",1" Panel To 1"
Toilet Partition Continuous "H" (Alcove) Bracket For 1" Thick Panels Aluminum
Constructed of extruded anodized aluminum. Channel is 2-1/2" high by 1+" wide by 54" long, for use with 1" panels. Thru holes are 1-1/2" on center. Holes are 1/4" diameter. Thru holes are every 13" or so. Sometimes known as Bathroom Stall Continuous Alcove Bracket or Toilet Partiton Alcove Bracket. The manufacturers part numbers are 2858, and 650-1862-54. These brackets are shipped with all the needed fasteners.
9A2858 -
Partition Two Ear Bracket Chrome Plated For 1" X 1-1/2"X 2-1/2"L
If your toilet partition (bathroom stall) wall bracket is stamped 1750, then chances are you have the Two Ear Wall Bracket for 1″ thick toilet partition panels. This brackets base is 1-3/8″ wide x 3-15-16″ long with 3″ center to center hole spacing. The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. The bracket is made of a die cast material that is then chrome plated. The bracket sometimes goes by the name Bathroom Stall (toilet partition) Two Ear Bracket or Wall Bracket.
9A0175 -
Toilet Partition U Bracket Cast SS 1" Panel, 1-1/2" X 1-3/8" L
Toilet Partition U Bracket For 1" Thick Panel Cast Stainless Steel
Cast stainless steel construction. Bracket base is 1-3/8" x 1-1/4" with two mounting screw holes. Bracket legs project out 1-3/8" with the thru hole at 1" on center from the bottom of the base. Also known as a Bathroom Partition Stall U-Bracket or Wall Bracket 1". Manufacture part number 1913
Shipped with mounting screws
/p>9A1913 -
Continuous One Ear Bracket Stainless Steel 1-1/4" x 2-1/2" x 57"
Toilet Partition Continuous One Ear Wall Bracket For 1-1/4" Panel x 57" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 2-11/16" x 57" long. Mounting holes are 1-19/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 14" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2359.
9A2359 -
Toilet Partition Continuous 'L' Bracket Aluminum 2-3/4" X 57-1/2"
Toilet Partition Continuous 'L' Wall Bracket 2-3/4" X 57-1/2" Aluminum
Extruded aluminum construction. Base is 1-3/8" and the leg projects out 2-3/4". These are sold individually. It is also known as a Bathroom Stall Continuous L Wall Bracket. The manufacturers part # is 2684.
9A2684 -
Two Ear Bracket For 1-1/4" X 1-1/2"X 2-1/2" L
If your toilet partition (bathroom stall) wall bracket is stamped 1830, then chances are you have the Two Ear Wall Bracket for 1-1/4″ thick toilet partition panels. This brackets base is 1-3/8″ wide x 3-15-16″ long with 3″ center to center hole spacing. The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. The bracket sometimes goes by the name Bathroom Stall (toilet partition) Two Ear Bracket or Wall Bracket, they can be ordered on our website.
9A0183 -
Partition SS U Bracket 3/4" Panel 1-1/2" X 1-3/8" L
Partition U Bracket For 3/4" Thick Panel Cast Stainless Steel. Cast stainless steel construction. Bracket base is 1-3/8" x 1" with two mounting screw holes. Bracket legs project out 1-3/8" with the thru hole at 1" on center from the bottom of the base. Also known as a Bathroom Partition Stall U-Bracket or Wall Bracket 3/4". Manufacture part number 1893. Shipped with mounting screws.
9A1893 -
Continuous One Ear Bracket Aluminum 1" Panel, 2-3/4" X 54"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 54" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 2878, and 650-9750-54. These brackets are shipped with all the needed fasteners.
9A2878 -
Toilet Partition Alcove Clip For 1" Panel To 1-1/4" Pilaster
Chrome Plated Alcove Clip
Chrome plated zamac die casting, for use on 1" doors and 1-1/4" posts. Horizontal leg in picture is 1-1/4" wide and 1-1/2" tall. The vertical leg is 1-5/32" wide. The holes are 1/4" diameter. Also known as Bathroom Stall Alcove Clip, Toilet Partition Alcove Clip, and Toilet Stall Alcove Clip. The manufacturers part number is 1550 Alcove Clip and 650-6650 Alcove Clip.
9A0155 -
Toilet Partition U Bracket Cast SS 7/8" Panel, 1-1/2" X 1-3/8" L
Toilet Partition U Bracket For 7/8" Thick Panel Cast Stainless Steel
Cast stainless steel construction. Bracket base is 1-3/8" x 1-5/32" with two mounting screw holes. Bracket legs project out 1-3/8" with the thru hole at 1" on center from the bottom of the base. Also known as a Bathroom Partition Stall U-Bracket or Wall Bracket 7/8". Manufacture part number 1903
Shipped with mounting screws
9A1903 -
Aluminum Continuous One Ear Bracket 3/4" Panel, 2-1/2" X 57-1/2"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 3/4" for 3/4" thick panels. Sometimes known as Bathroom Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 650-4031. These brackets are shipped with all the needed fasteners.
9A4364 -
Continuous One Ear Bracket Aluminum, 1 1/4" X 2-3/4" x 57-1/2"
Toilet Partition Continuous One Ear Wall Bracket For 1 1/4" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1-1/4" for 1-1/4" thick panels. Sometimes known as Bathroom Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 2354, and 650-9186-57. These brackets are shipped with all the needed fasteners.
9A0184C -
Alcove Clip Set Chrome Plated 2 Pieces
Toilet Partition Alcove Clip Set, 2 Pieces, For 1" To 1-1/4" Panel Chrome Plated
These clips are 1-1/2" tall x 2-1/4" wide. The screws are 1-1/2" on center, with 1/4" diameter holes. The clip is constructed of polished chrome plated zamac die cast materail. This part is also know as Bathroom Stall Alcove Clip Set, or Toilet Partition Alcove Clip. The manufacturers part number is 8340, 560157, and 650-6656. These clips are sold in sets with the fasteners. They are used to connect a 1" panel to a 1-1/4" panel.
9A8340 -
Urinal Screen Bracket Cast SS, Any Thickness, 1-1/2" x 3-1/2"
Toilet Partition Urinal Screen Bracket Cast Stainless Steel. This bracket is for any thickness panel. The bracket is 2 separate pieces. The base is 1-1/2" x 1-1/2". The base mounting hole is 1" from the inside face of the leg face. The bracket projects out 3-1/2", and the holes are at 3-1/8" and 2-1/8" from the mounting face. The brackets are made of Cast Stainless Steel. This bracket is also known as a Two Piece Bracket - X-long Two Holes, Toilet Partition Bracket, or Bathroom Stall Extra Long Bracket. The manufacturers part number is 1323. The bracket is shipped as two pieces plus all of the fasteners.
9A1323 -
Toilet Partition Angle Bracket Chrome Plated 1 3/4" X 1 3/4"
Toilet Partition Angle Bracket Chrome Plated 1 3/4" X 1 3/4"
Constructed of stainless polished finish with chrome plated zamac die casting. Base is 1-3/4" x 1-3/8", projects out 1-3/4". Two screw holes are 1/4" diameter, and are located 1-1/4" from opposing face. Sometimes called Bathroom Stall Angle Bracket. Sold individually, and shipped with required screws. Manufacturer part number 2011.
9A0160 -
Continuous One Ear Bracket Aluminum 1" X2-3/4"X 57-1/2"
Partition Continuous One Ear Wall Bracket For 1"Panel Aluminum
Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 2334, one ear 1" x 57, and 650-9750-58. These brackets are shipped with all the needed fasteners.
9A0176C -
One Ear Bracket 1" Panel, 1-1/2" X 2-1/2" L
Toilet Partition One Ear Wall Bracket For 1" Panel,Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 2-13/32" with the mounting screws are 1-15/32" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and One Wing Bracket. Manufacturer part # 1769.
Shipped with screws
9A1769 -
One Ear Urinal Bracket For 1" Panel 1-1/2" X 3-1/2
The bracket is a zamac die cast material that is then polished chrome plated. The base measures 1-1/2" wide x 2-21/32" long with two mounting holes 1-1/2" on centers. The bracket projects out 3-1/2" with the legs 1" apart, it is used for mounting a 1" thick panel. The mounting holes are located 3-1/8" from the base of the the bracket, and all the holes are 1/4" diameter. The bracket is sometimes called a Toilet Partition One Ear Bracket, Bathroom Stall One Ear Bracket, 1270 wall bracket, 650-6407 wall bracket or sometimes One Wing Bracket.
9A1270 -
One Ear Bracket Stainless Steel 1-1/4" Panel, 1-1/2" X 2-1/2"
Toilet Partition One Ear Wall Bracket For 1-1/4" Panel, Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 2-13/32" with the mounting screws are 1-15/32" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and One Wing Bracket. Manufacturer part # 1849.
Shipped with screws
9A1849 -
Continuous Two Ear Bracket Aluminum 1" Panel, 2-3/4" X 41"
Toilet Partition Continuous Two Ear Wall Bracket For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 41" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2888, and 650-8531-41. These brackets are shipped with all the needed fasteners.9A2888 -
One Ear Urinal Bracket For 1-1/4" Panel 1-1/2" X 3-1/2"
Is your Toilet Partition Bracket stamped 1310, if it is you have a one ear urinal bracket. The bracket is made from a zamac die casting that is then polished chrome plated. It sometimes goes by the name Toilet Partition One Ear Urinal Screen Bracket, Urinal Wall Bracket, 1310 Wall Bracket, 650-6410 wall bracket, or just Wall Bracket. The base is 1-1/2" wide x 2-3/4" long with a 1-1/2" on center hole spacing. The legs project out 3-1/2" with the mounting holes at 3-1/8" from the base. The holes are 1/4" diameter.
For use on 1-1/4" thick panels
9A1310 -
One Ear Bracket Stainless Steel 3/4" Panel 1-1/2" X 2-1/2"
Stamped SS One Ear Bracket 3/4" Panel 1-1/2" X 2-1/2"
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 2-5/32" with the mounting screws are 1-11/32" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and One Wing Bracket. Manufacturer part # 1649.
Shipped with screws
9A1649 -
Continuous Two Ear Bracket Aluminum 1" Panel, 2-1/2" X 54"
Toilet Partition Continuous Two Ear Wall Bracket For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 54" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2868, and 650-8531-54. These brackets are shipped with all the needed fasteners.
9A2868 -
Partition Continuous Two Ear Bracket Aluminum 1" X 2-1/2"X57-1/2"
Toilet Partition Continuous Two Ear Wall Bracket For 1"Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2344, and 650-4029. These brackets are shipped with all the needed fasteners.
9A0175C -
Partition Two Ear Urinal Bracket For 1" X 1-1/2" X 3-1/2
Partition Two Ear Urinal Bracket For 1" X 1-1/2" X 3-1/2
This bracket is usually used on Urinal Screens, which are the walls between men's urinals, to hold the partitions to the wall. The bracket is made of a zamac casting that is then chrome plated. The bracket base measures 1-1/2" x 4", with a 3" center to center hole spacing. The bracket projects out 3-1/2", with the mounting holes at 2-1/8" and 3-1/8" from the base. The holes used to mount the bracket to the wall and to the urinal are 1/4" diameter. The 1280 Bracket is sometimes called a Bathroom Stall Bracket, Toilet Partition Bracket, Two Wing Bracket, or Urinal Screen Bracket.
For 1" thick panels
9A1280 -
One Ear Bracket Stainless Steel 7/8" Panel 1-1/2" X 2-1/2"
Toilet Partition One Ear Bracket For 7/8" Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 2-5/16" with the mounting screws are 1-13/32" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and One Wing Bracket. Manufacturer part # 1659.
Shipped with screws
9A1659 -
Two Ear Urinal Bracket For 1-1/4" X 1-1/2" X 3-1/2"
Two Ear Urinal Bracket For 1-1/4" X 1-1/2" X 3-1/2"
This bracket is constructed of zamac die cast material that is then polished chrome plated. The base is 1-1/2" wide x 4" long, with two screws 3" on center. The legs project out 3-1/2" with the thru screws at 3-1/8" and 2-1/8" from the base. The 6 holes are 1/4" diameter. This bracket is also known as a Toilet Partition Bracket, Bathroom Stall Bracket, Two Ear Extra Long Bracket, Two Wing Bracket, Urinal Screen Bracket X-Long. The manufacturers part # are 1330, and 650-6449. The bracket includes all the fasteners.
This bracket is for a 1-1/4" thick panel
9A1330 -
One Ear Hinged Bracket , 3 X 2-1/2 X 1
The One Ear Hinged Bracket , 3" by 2-1/2" by 1" is constructed of 16 ga (.050") thick for the hinge and 14 ga (.075") thick on the bracket, stainless steel. The one ear hinged bracket is Riveted and welded together. Bracket is 3" high x 2-1/2" deep for a 1" panel. This bracket is ideal for applications were the Pilaster and Panels are not at a 90 degree angle. Also known as a Bathroom Stall Hinged Wall Bracket. Manufacture part # 111359.
9A1359 -
One Ear Hinged Bracket Stainless Steel , 3 X 2-1/2 X 1-1/4
The One Ear Hinged Bracket Stainless Steel , measures 3" high by 2-1/2" deep by 1-1/4" and is designed for an 1-1/4" thick panel. Hinge is 16 ga (.060") thick, Bracket is 14 ga (.075") thick. The one ear hinged bracket is Riveted and welded together. This bracket is ideal for applications were the Pilaster and Panels are not at a 90 degree angle. Also known as a Bathroom Stall Hinged Wall Bracket. Manufacture part # 111369.
9A1369
