TSM

Swing Up Grab Bar Locks firmly into place when lifted into an upright position. 1-1/4" OD.
projects 30" from wall. When properly mounted, swing-up type bar will sustain a static load of 250 lbs.

Grab Bar L 42" x 52" ADA Accessible Compartments Require: 1-1/2" dia. bars, Specify for all Grab Bars when Ordering: 2. Concealed Snap on mounting,1-1/2" Dia. Tubing

ADA Accessible Compartments Require: 1-1/2" dia. bars, Specify for all Grab Bars when Ordering: 2. Concealed Snap on mounting,1-1/2" Dia. Tubing, H-901/CS-3.

Fully reinforced, wide top hem and reversed bottom hem to prevent water and soap from collecting. Each is equipped with rust proof nickel grommets spaced aprx. 6" on center and down 3/4" from top edge. When determining size of curtain required, consider the desired fullness and add 10" to the shower rod length.

Anti-Bacterial, flame resistant, self deodorizing fabric. Fabric is non-toxic and contains a patented dual agent antimicrobial system. Provides around the clock effectiveness against cross-infection hazards, reducing growth of viable diseases and odor forming organisms on their surfaces. Curtains are flame resistant and offer permanent protection against the dangers of accidental fires.

Fully reinforced, wide top hem and reversed bottom hem to prevent water and soap from collecting. Each is equipped with rust proof nickel grommets spaced aprx. 6" on center and down 3/4" from top edge. When determining size of curtain required, consider the desired fullness and add 10" to the shower rod length.

Anti-Bacterial, flame resistant, self deodorizing fabric. Fabric is non-toxic and contains a patented dual agent antimicrobial system. Provides around the clock effectiveness against cross-infection hazards, reducing growth of viable diseases and odor forming organisms on their surfaces. Curtains are flame resistant and offer permanent protection against the dangers of accidental fires.

Fully reinforced, wide top hem and reversed bottom hem to prevent water and soap from collecting. Each is equipped with rust proof nickel grommets spaced aprx. 6" on center and down 3/4" from top edge. When determining size of curtain required, consider the desired fullness and add 10" to the shower rod length.

Anti-Bacterial, flame resistant, self deodorizing fabric. Fabric is non-toxic and contains a patented dual agent antimicrobial system. Provides around the clock effectiveness against cross-infection hazards, reducing growth of viable diseases and odor forming organisms on their surfaces. Curtains are flame resistant and offer permanent protection against the dangers of accidental fires.

Fully reinforced, wide top hem and reversed bottom hem to prevent water and soap from collecting. Each is equipped with rust proof nickel grommets spaced aprx. 6" on center and down 3/4" from top edge. When determining size of curtain required, consider the desired fullness and add 10" to the shower rod length.

Anti-Bacterial, flame resistant, self deodorizing fabric. Fabric is non-toxic and contains a patented dual agent antimicrobial system. Provides around the clock effectiveness against cross-infection hazards, reducing growth of viable diseases and odor forming organisms on their surfaces. Curtains are flame resistant and offer permanent protection against the dangers of accidental fires.

The 36" Grab Bar Center Post is fabricated of #18 gauge stainless steel with a #4 satin finish.  The center post is right in the center of the grab bar and adds extra mounting strength.  They are available in 1-1/4” and 1-1/2” outside diameter.  All bars maintain a constant 1-1/2” offset, which is the distance between the inside of the bar and the mounting surface.  The mounting flanges have a 3” diameter.  We offer three types of mounting,  exposed screw mounting, snap on flange concealed and set screw flange concealed.   When properly installed they will easily support up to 250 pounds.  The recommended height for mounting these grab bars is 33 to 36” above the finished floor, but heights vary depending on local codes.  Due to the various materials that these are mounted on, screws are not included.  The overall length of a 36” grab bar will be 39” due to the flanges.

The 42" Grab Bar Center Post is fabricated of #18 gauge stainless steel with a #4 satin finish.  The center post is right in the center of the grab bar and adds extra mounting strength.  They are available in 1-1/4” and 1-1/2” outside diameter.  All bars maintain a constant 1-1/2” offset, which is the distance between the inside of the bar and the mounting surface.  The mounting flanges have a 3” diameter.  We offer three types of mounting,  exposed screw mounting, snap on flange concealed and set screw flange concealed.   When properly installed they will easily support up to 250 pounds.  The recommended height for mounting these grab bars is 33 to 36” above the finished floor, but heights vary depending on local codes.  Due to the various materials that these are mounted on, screws are not included.  The overall length of a 42” grab bar will be 45” due to the flanges.

The 48" Grab Bar Center Post is fabricated of #18 gauge stainless steel with a #4 satin finish.  The center post is right in the center of the grab bar and adds extra mounting strength.  They are available in 1-1/4” and 1-1/2” outside diameter.  All bars maintain a constant 1-1/2” offset, which is the distance between the inside of the bar and the mounting surface.  The mounting flanges have a 3” diameter.  We offer three types of mounting,  exposed screw mounting, snap on flange concealed and set screw flange concealed.   When properly installed they will easily support up to 250 pounds.  The recommended height for mounting these grab bars is 33 to 36” above the finished floor, but heights vary depending on local codes.  Due to the various materials that these are mounted on, screws are not included.  The overall length of a 48” grab bar will be 51” due to the flanges.