Mills Toilet Partition
Everything you need for your Bathrooms
You will find everything from Global Toilet Partition complete commercial restroom partition toilet stall systems or just door's, panel's, pilasters and privacy screens on our website. Accessories from Hand Dryers, Toilet Paper Holders, Paper Towel Dispensers, Fem nap Disposal units, foaming soap dispenser and more. Partition hardware is separated by manufacture for Door hardware, this is very important to know your manufacture of partitions. All generic parts for the manufactures are typically brackets, door pulls, coat hooks, slide latches, keepers and more on our website. All Toilet partitions are not returnable, every order is made per customer. Email us for assistance.
-
Toilet Partition Coat Hook & Bumper 3-1/2" Projection x 2-3/4" High
The Toilet Partition Coat Hook & Bumper 3-1/2" Projection x 2-3/4" High is constructed of Zamac die cast metal and then chrome plated and polished. Coat hook base is 1-1/2" wide by 2-3/4" high, with screw spacing of 7/8" at the top. Hook projects out 1". Bumper projects out 3-1/2" with a rubber insert. Also known as a Bathroom Stall Coat Hook and Bumper. Manufacture part # 4260. This product is the same as our 9OT285 and 9HA426. We find this hooks used on Global Partition Corp and Accurate Partition Corp restroom stalls.
9G0160 -
Partition Keeper Bumper Inswing Flat Stop Chrome Plated
The Partition Keeper Bumper Inswing Flat Stop Chrome Plated is a strike and keeper that measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-19/32" on center. They are constructed of Zamac die cast metal that is then chrome plated and polished. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5140. Shipped with mounting screws.
90T116 -
Partition Slide Bolt Latch 3/8" Bar To Door Clearance
The Toilet Partition Slide Bolt Latch 3/8" Bar To Door Clearance is just like every other slide bolt, except it has an offset bolt. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/4" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 3/8" from the back of the base to the underside of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. They are constructed of Zamac die cast metal that is then chrome plated and polished. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch and Toilet Partition Locks. Manufacturer part # 5030. Shipped with mounting screws.
90T160 -
Mills Toilet Partitions Keeper Bumper Concealed
The Mills Toilet Partitions Keeper Bumper Concealed is for use on 1-1/4" thick round edged pilaster posts. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. They are constructed of Zamac die cast metal that is then chrome plated and polished. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5590. Shipped with mounting screws.
90T317 -
Mills Toilet Partition Keeper Bumper
The Mills Toilet Partition Keeper Bumper is for use on 1-1/4" thick square edged pilaster posts. It is constructed of Zamac die cast metal that is then chrome plated and polished. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110. Shipped with mounting screws.
90T120
