For quotes on bathroom drawings, please email Sales@PartitionsAndStalls.com
0
My Cart
item(s) - $0.00

ATTENTION: During the COVID-19 outbreak we are available 8:00am-5:00pm EDT, Monday-Thursday until further notice.
We are still shipping Monday-Thursday at this time.
We're currently experiencing supply chain issues. We're doing our best to expedite shipping, and appreciate your patience.

In stock orders placed now will be shipped next business day.

  • Official PayPal Seal
Our customer service is available 24/7. Call us at (555) 555-0123.

Full Length Door Stops

Selling full length aluminum door stops for toilet partition door privacy. This will block the view from inside or outside of the toilet compartment on the latching side. We offer 3/4", 1" or 1-1/4" post thickness and in or out swing door stops. lengths are 54"-57". New brushed aluminum continuous door stop and hinge side filler for powder coated steel products. This material has a slight round edge to match hinge sightline filler and full door stop.

List  Grid 

Desc
  1. $97.75
    SKU: 9A8443721

    Global partitions No sight partition door gap filler for powder coated steel partitions or stainless steel material. The doors are typically 1" thick. The hinge side filler has a slight round edge. On the latch side there is also a slight round edge for mounting, there is a built in notch for the slide bolt that comes out the center of the doors to lock into. This kit can be used for an in swing or out swing door. The construction is aluminum and easy to shorten if needed. This product is used with 1-1/4" edge with a slight round edge to it. All security screws included for installation. The product is made by Global Partitions with part numbers 40-8443721.

  2. $86.25
    SKU: 9A560058

    Toilet partition continuous door stop for powder coated steel partitions, this has a slight round edge for attaching. The length is 57" and is used on a 1-1/4" slight round edge pilaster for mounting. Used with 1" doors and has a concealed turn latch with the pin coming out the center edge of the door. The hole spacing for the slot is 28-1/2" dead center of unit. The slot for the bolt to lock to is 7/16" wide x 5/8"ht. This helps with blocking the door gaps on the locking side of the door. This is made of brushed aluminum material and is used with in or out swing doors. Also known as Hadrian partitions part number 560058.

  3. $69.00
    SKU: 9A560458

    Toilet partition door hinge side sightline filler for 1-1/4" thick powder coated steel pilaster post. This product has a slight round edge specifically for this material. The demensions are 1-1/4"x 54-1/2", this product is brushed aluminum and can be cut in the field. This product will help block the gap on the toilet partition hinge side. Known as 560458 from Hadrian partitions and can be used with other factories.

  4. $78.20
    SKU: 9A8454500

    Full length aluminum door stop for 3/4" material used with phenolic commercial toilet partitions or posts that are 3/4" thick. This product will help any gap from the front view of the toilet stall door on the latch side. For an out swing door the slide bolt latch locks onto the opposite side of the bumper. For an in swing door the kit comes with a simple stainless steel keeper that is mounted on the inside of the stall on the post for the latch to lock to. This kit is used for an inswing or an outswing door. The spec sheet is attached, the overall height is 53-1/2". The product is made by Global Partitions with part numbers 40-8454500 and 40-8262370.

  5. $107.53
    SKU: 9A135974

    Toilet partition full length aluminum door stop for 3/4" panel Inswing doors. This product is clear anodized aluminum. This full length door stop with block the gap between the door and the post next to it. For an inswing the slot is 3/8"x1-1/4" wide for the slide latch to latch it. The door keeper and strike is 57-1/2" in length and has 5 holes spaced at 14" apart and starts at 3/4" from the top and the bottom. Also known as 135974 strike & keeper channel. Includes all hardware.

  6. $107.53
    SKU: 9A135984

    Toilet partition full length aluminum door stop for 3/4" panel outswing doors. This product is clear anodized aluminum. This full length door stop with block the gap between the door and the post next to it. For an outswing the latch locks on the back side of the bumper. The door keeper and strike is 57-1/2" in length and has 5 holes spaced at 14" apart and starts at 3/4" from the top and the bottom. Also known as 135984 strike & keeper channel. Includes all hardware.

  7. $78.20
    SKU: 9A8464400

    Full length aluminum door stop for 1" material used with solid plastic commercial toilet partitions or posts that are 1" thick. This product will help any gap from the front view of the toilet stall door on the latch side. For an out swing door the slide bolt latch locks onto the opposite side of the bumper. For an in swing door the kit comes with a simple stainless steel keeper that is mounted on the inside of the stall on the post for the latch to lock to. This kit is used for an inswing or an outswing door. The spec sheet is attached, the overall height is 53-1/2". The product is made by Global Partitions with part numbers 40-8464400 and 40-8262370.

  8. $107.53
    SKU: 9A134304

    Toilet partition full length aluminum door stop for 1" panel Inswing doors. This product is clear anodized aluminum. This full length door stop with block the gap between the door and the post next to it. For an inswing the slot is 3/8"x1-1/4" wide for the slide latch to latch it. The door keeper and strike is 54" in length and has 5 holes spaced at 13" apart and starts at 1" from the top and the bottom. Also known as 134304 strike & keeper channel. Includes all hardware.

  9. $107.53
    SKU: 9A134314

    Toilet partition full length aluminum door stop for 1" panel outswing doors. This product is clear anodized aluminum. This full length door stop with block the gap between the door and the post next to it. For an outswing the latch locks on the back side of the bumper. The door keeper and strike is 54" in length and has 5 holes spaced at 13" apart and starts at 1" from the top and the bottom. Also known as 134314 strike & keeper channel. Includes all hardware.

List  Grid 

Desc